Bedienungsanleitung Austroflamm Jini Xtra (Seite 10 von 20) (Deutsch, Englisch, Französisch, Italienisch)

694329

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Jini/Jini Xtra 8 english

5. SPECIAL FEATURES JINI/JINI XTRA

Xtra heat storing technology

The model Jini Xtra has been equipped with the unique Xtra heat storing technology. This technology is based on the

patented Heat Memory System, but also on the special flue gas guidance and the convection air which can be regulated or

shut off completely. Consequently a fast heating system is being combined with an extraordinarily efficient heat storing.

The convection air can be regulated according to demand with the attached lever (see picture). The more the convection air

outlets of the top plate are open, the faster heat but less heat storing can be reached. A closed top plate will however lead to

slow heat and longer heat storing.

Our hint: while the fire still burns let the convection air outlets open; close them after the fire has burnt down in order to reach

a steady heat emission.

Operation with external air supply

The German institute for constructional engineering (DIBT) has given the Jini/JiniXtra the general technical approval for

operation with exteranl air supply. If the combustion air is being supplied directly to the furnace by an air-tight pipe including

closing mechanism from the outside, then the stove may be used in residential property with mechanical ventilation.

If the stove in being used like that, a multiple stove installation on the same chimney is forbidden.

This stove has been approved by the German DIBT.

___________________________________________________________________________________________________

problem

possible reason

solution

door glass gets sooty too fast

bad chimney draught

generally: door glasses must be cleaned with

Austroflamm glass cleaner from time to time

(depending on the frequency of use)

contact your chimney sweep (elongate

chimney/draught metering)

incorrect use of the combustion air

supply lever

please operate air lever according to user's

instructions (if secondary air is closed, the door

glass soots rather fast)

wood logs are too large

keep to the max. fuel quantity according to user's

instruction

operating temperature was not

reached

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

stove does not get enough

combustion air

chimney draught not sufficient

contact your chimney sweep (elongate

chimney/draught metering)

stove is sooted inside

more fuel, use dry wood (< 15 % residual moisture),

attend air regulation

stove smells strongly and

there is smoke on the outside

surface

baking phase of the varnish

there may be some odour development during the

first operations

stove is dusty/dirty

cleaning before the heating season starts!

exhaust gas emission while

putting more wood on the fire

and during operation

chimney draught no sufficient, flue

pipe connection leaky

inspect joints and seal up again if necessary

check chimney draught, examine operating - for info

video follow:

http://www.austroflamm.com/de/Video/index.html

the stove door was opened before

the wood has burnt down to embers

put more fuel wood into the combustion chamber

only if there are only embers left (no more visible

flame)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Austroflamm Jini Xtra Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info