Bedienungsanleitung Austroflamm Polly 2.0 (Seite 72 von 88) (Deutsch, Englisch, Französisch)

694348

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

english 70

Table 15 - Correct use of the week timer (example)

To set the week timer, proceed as follows:

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



   ''Add new timer''

Select the day(s) of the time interval that you want to display by tapping the appropriate

abbreviation (Mon = Monday, Tue = Tuesday, Wed = Wednesday, Thu = Thursday, Fri = Friday,

Sat = Saturday, Sun = Sunday).

Set the start time (hours and minutes) by tapping “Start time’’ and then the

and/or

symbols. Tap ''OK'' to save your settings.

Set the end time (hours and minutes) by tapping “End time’’ and then the

and/or

symbols. Tap ''OK'' to save your settings. Tap to get to the temperature.

Set the target temperature by tapping the

and/or symbols. Tap ''Save'' or  to save your

settings. If you change your mind, tap on “Delete” and the time interval is not saved.

To activate the set week timer, tap “ON” at the top right in the Timer menu. To deactivate the set

week timer, tap “OFF” in the Timer menu.

Tap

to exit the Timer menu.

! NOTE:If the currently measured temperature is higher than the set target temperature, the

system does not switch on the pellet stove until the temperature has dropped below the

target value.

71 english

NOTE: Ben, Polly light and Percy light do not have a tilting grate. This means that you can only

use the “"Week timer” to a limited extent. Once ash cake covers the base of the burner bowl above

the ignition hole, it is no longer possible to carry out automatic ignition. This means that you must

empty the burner bowl in good time to be able to start your pellet stove reliably using the timer

function. With models that do not have a tilting grate, we recommend setting a maximum of one

timer per day.

4.8. Statistics

To view the statistical data of your pellet stove, proceed as follows:

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



 

Select the desired period.

4.9. Setting the pellet quality

You can set three different pellet qualities.

Fuel quality 1 is a very high quality. Fuel quality 3 is a very low quality (a high proportion of softwood,

dusty, low calorific value). The default “Fuel” setting is fuel quality 2.

To select the fuel quality, proceed as follows:

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



   ''Fuel''

Set the desired fuel quality by tapping the

and/or symbols. The system saves the

changes immediately.

10.4. Activating monitoring of fuel autonomy

The pellet stove’s controller can calculate how long the amount of pellets in the stove can last for. You

can read this off the control panel. This option must be activated first.

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.

     “Fuel” "Fuel autonomy""ON".

4.10. Resetting fuel autonomy after filling the fuel tank

After you have filled the pellet tank, you must reset fuel autonomy.

To reset fuel autonomy, proceed as follows:

englisch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Austroflamm Polly 2.0 Seite 72

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Austroflamm Polly 2.0

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info