694349
68
Zoom out
Zoom in
Vorherige Seite
1/88
Nächste Seite
english 66
3. Fuel
Different quality pellets also cause different "crusting" in the burner bowl and on the grate of the pellet
stove. In this connection, we recommend using pellets that do not contain artificial binding agents and
which leave the smallest possible amount of unburned residue (in accordance with ÖN EN 14961-2 or
ENplus A1 or the equivalent).
4. Using the control panel
4.1. Remove the transparent protective foil
Before you use the control panel, remove the transparent protective foil.
4.2. General designations of symbols
SYMBOL DESIGNATION PROCEDURE
Enter the Temperature menu Tap
Check the current ignition/switch-off status Tap
Enter the Main menu Tap
Increase Tap or hold
Reduce Tap or hold
Enter the Timer menu Tap
Enter the Statistics menu Tap
Enter the Settings menu Tap
Enter the Tips menu Tap
ON
Hold
OFF
Hold
Set screen lock to HIGH Tap
Set screen lock to LOW Tap
Close menu Tap
Navigate back Tap
Previous sub-menu page (Ben, Percy light, Polly
light)
Tap
Next sub-menu page Tap
Next sub-menu page (Percy, Polly 2.0)
Information about the selected sub-menu Tap
Monitor/reset fuel autonomy Tap
ON --> Activate; OFF --> Deactivate Tap
Confirm Tap
! NOTE: Using low-quality pellets or other material damages the functions of your pellet
stove and can void the guarantee and the associated manufacturer's responsibility.
67 english
DELETE Delete Tap
SAVE Save Tap
FEED Start screw conveyor manually
Hold
Indicates which of the icons on the control panel
you have to tap or hold.
Table 13 - Designations of symbols
! NOTE: With Ben, Percy light and Polly light, you page through the menus to the left or to the right (
and ). However, with Percy and Polly 2.0 you page through the menus from the top to the bottom
(
).
4.3. Setting the date and time
You must set the correct time and date to be able to use the timer functions.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
“Time”
Set the Hours, Minutes and Day of the week by tapping and/or . Save your
setting by tapping
.
''Date''
Set the Day, Month and Year by tapping and/or . Save your setting by tapping
.
4.4. Setting the target temperature
A sensor on the back of the pellet stove measures the target temperature.
Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip
this step.
The screen now shows the currently set ambient temperature (AIR temperature):
Change the target temperature by tapping and/or . The system saves the
changes immediately.
englisch
68

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Austroflamm Polly light wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Austroflamm Polly light

Austroflamm Polly light Bedienungsanleitung - Holländisch - 23 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info