Bedienungsanleitung Austroflamm Polly light (Seite 75 von 88) (Deutsch, Englisch, Französisch)

694349

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

english 72

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.

  

The system displays the following:



Tap FULL after you have topped up with fuel

Tap ''OK'' to save your settings. The fuel bar shows full:

4.11. Display brightness

You have different options on the control panel for setting the brightness of the display. Thanks to the

integrated ambient light sensor, the control panel can adapt the display brightness automatically.

4.11.1. Setting automatic brightness adjustment

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



   . “Display options”  “Display

brightness”

 ''Automatisch OFF/ON''

4.11.2. Setting active display brightness

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.

 

   . “Display options”  “Display

brightness”

Set the desired display brightness by tapping the

and/or symbols next to the “Brightness active”

label. The system saves the changes immediately.

! NOTE:Ifautomaticbrightnessadjustmentisactive,thisoptionisdeactivated.

4.11.3. Setting the display brightness in idle mode

You can increase or decrease the display brightness in idle mode to save energy. When you touch the

keypad, the display brightness is increased to the default value.

To set the display brightness in idle mode, proceed as follows:

73 english

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.

     . “Display options”  “Display

brightness”

Set the desired display brightness in idle mode by tapping the

and/or symbols next to the “Idle

disp. bright.” label. The system saves the changes immediately.

! NOTE:Ifautomaticbrightnessadjustmentisactive,thisoptionisdeactivated.

4.12. Activating the eco mode function

If the temperature rises above the target value, the heating device switches off automatically. It is

restarted automatically when the temperature drops below the target value.

To activate/deactivate the eco mode function, proceed as follows:

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



    ''Eco mode'',

Tap “On” to activate.

Select the desired “Restart temp.” This temperature specifies the value below the set target temperature

from which onwards the stove switches back on.

Select “Eco Mod. Temp.” This temperature specifies the value above the set target temperature from

which onwards the stove switches off.

4.13. Standby mode settings

The control panel switches to standby mode automatically after 30 seconds of inactivity and leaves this

mode when you touch it again. Depending on the settings for standby mode, the control panel shows the

following:

 The time, the air temperature, the logo or a sequence of these displays

 The status of the heating device (if it is OFF)

 Fuel autonomy (if activated)

 Error/alarms (if present)

To make idle display mode settings, proceed as follows:

Tap the screen (if it is still in idle mode) to leave idle mode. If the display is not currently in idle mode, skip

this step.



    . “Display options”  “Standby mode”

Activate the information that you want to display in standby mode by tapping the ''On/Off'' symbol

(multiple selection is possible).

4.14. Setting the loudspeaker volume

You can set the volume of the integrated loudspeakers or switch them off altogether.

To select the desired loudspeaker volume, proceed as follows:

englisch

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Austroflamm Polly light Seite 75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Austroflamm Polly light

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info