810578
19
Zoom out
Zoom in
Vorherige Seite
1/74
Nächste Seite
Operating manual Ruby EN 7 | Requirements at the installation location
19
7 Requirements at the installation location
7.1 Requirements to be met by the installation room
Your pellet stove must not be set up in:
spaces in which the required combustion air supply is not guaranteed.
spaces which are generally accessible, in particular emergency exits (staircases in residential build-
ing with no more than 2 apartments are not included in general accessible spaces).
spaces in which easily flammable or potentially explosive substances or mixtures are processed,
stored or manufactured.
spaces, apartments or units from which air is extracted with the aid of ventilators, such as ventila-
tion- or hot-air heating installations, extractor hoods or exhaust air tumble dryers. Unless the safe
function of the pellet stove is ensured.
This is ensured if:
the systems only circulate air within a space.
the systems have safety features which autonomously and reliably prevent negative pressure in
the installation space.
simultaneous operation of the fireplace and the air-extracting system is prevented by safety
features.
the flue gas routing is monitored by a particular piece of safety equipment.
Floor load-bearing capacity
Before installing, verify whether the load-bearing capacity of the substructure can withstand the weight
of your pellet stove.
The installation surface for the pellet stove must have an appropriate load-bearing capacity. If an
existing design does not fulfil this condition, suitable measures (e.g. a plate for distribution of the
load) must be taken to meet it.
7.2 Chimney requirements
To protect your own safety, national and local regulations exist governing the connection of flue pipes
to the chimney. Your pellet stove is set up at the factory for connecting to 130 mm flue diameter / top.
With minor modifications on site it can also be connected at the rear. When connecting with other pipe
diameters, you should obtain the prior approval of your chimney sweep. Your specialist pellet stove
dealer will be familiar with the guidelines. For your own safety the flue connection should be carried
out by a specialist.
7.3 Combustion air / Outside air supply
This pellet stove requires sufficient combustion air to operate smoothly. With dense building envel-
opes, the room air is insufficient. For this reason, the combustion air required must be supplied from
outside.
Your pellet stove is prepared for this situation (balanced flue operation). The external air supply pipe
must be connected tightly to the pellet stove (e.g. a pipe clamp or airtight adhesive tape). Your dealer
will advise you on the correct connection.
19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Austroflamm Ruby wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Austroflamm Ruby

Austroflamm Ruby Bedienungsanleitung - Deutsch - 76 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info