37
5. Tap on the right side of the MAX button, and enter the required
maximum value.
6. Tap the ON/OFF button on the right side of the Buzzer Alarm
button to turn it on or off.
7. Tap Done to save the setting and return to the Live Data screen;
or tap Cancel to exit without saving.
If the threshold limits are successfully set, two horizontal lines will display
on each of the data graphs (when Waveform Graph Mode is applied) to
indicate the alarm point. The threshold lines are displayed in different
colors from the waveform of the parameters.
Record Button – displays the configuration screen for Record
Setting, to set the trigger type, duration and trigger point for the data
recording function.
a) Trigger Type – sets the trigger mode for data recording, Manual
and Auto. There are four options available:
1) Manual – manually start and stop data recording.
2) DTC – auto triggers data recording when any DTC is
detected.
3) DTC Check Mode – auto triggers data recording when
certain pre-selected DTC types are detected.
4) Parameter – auto triggers data recording when any
parameter value reaches the preset threshold.
b) Duration – sets the recording time (for Auto trigger mode only).
c) Trigger Point – reserves a relative percentage of a record
length before the data recording start point for reference (for
Auto trigger mode only).
To perform setting for live data record
1. Tap the Setting functional button at the bottom of the Live Data
screen.
2. Tap the Record navigation button.
3. Tap the
○
> button on the right of Trigger Type bar and select
the required trigger mode.
