Bedienungsanleitung Avant 635 (Seite 17 von 28) (Englisch)

601694

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

STEERING OF THE MACHINE

Steering of the machine happens with the steering

wheel. The steering wheel is hydraulically powered.

A practical way of steering is to steer with your left

hand on the knob of the steering wheel. This way

your right hand is free to operate other functions.

Familiarise yourself with the special drive features and

space needs of this articulated loader on a flat, even

and open place.

LOADER CONTROL

The loader boom and bucket are controlled with the

multi-function lever sideways (tilt) and back & forward

(boom up & down).

· Pull backward to lift the boom

· Push forward to lower the boom

· Push left to raise the tip of the bucket (filling)

· Push right to lower the tip of the bucket (emptying)

USING THE AUXILIARY HYDRAULICS

Auxiliary hydraulics (hydraulically operated attachments)

are controlled with the lever no. on the control

panel , or with the buttons on the joystick (see page 13).

The lever locks in the locking position (on the right)

which facilitates operation of the attachments that

require constant oil flow (rotary broom, backhoe etc.).

Selection lever of the pumps for auxiliary hydraulics:

Avant 600 series loaders are equipped with two pumps

for auxiliary hydraulics. With the lever no. one can

select the flow of either one pump or both pumps.

With one pump the attachment works more slowly

and with more torque, with both pumps coupled the

operating speed of the attachment is higher and torque

lower. Some attachments require the flow of both

pumps to work properly (e.g. trencher, wood chipper).

HAND THROTTLE

When driving, the

revolution speed of the

engine can be adjusted

with the hand throttle

lever, if necesarry. Do

not turn the machine

with a high travel speed.

600 Series

Steering of the machine

NEVER TIP OVER THE LOADER.

NEVER USE A HIGH DRIVE SPEED

WHEN TURNING.

In particular: when the loader boom is up

the stability of the machine is much weaker

when turning.

WHEN DRIVING, ALWAYS KEEP

THE LOADER BOOM AS LOW AS

POSSIBLE. Risk of tipping over increases

considerably when there is a heavy load

on the loader (a heavy attachment or a

big load in the bucket) and the boom is

up when driving.

ALWAYS REMEMBER  SAFETY FIRST.

TEST ALL THE FUNCTIONS OF THE

LOADER AT AN OPEN AND SAFE PLACE.

MAKE SURE THAT THERE ARE NO

PERSONS IN THE OPERATING

AREA OF THE MACHINE.

REMEMBER THAT, WHEN TURNING,

THE DRIVERS SEAT EXTENDS

BEYOND THE TURNING RADIUS OF

THE WHEELS.

NOTICE! THE ENGINE CANNOT

START IF THE AUXILIARY

HYDRAULICS CONTROL LEVER IS

IN THE LOCKING POSITION.

THE OPERATING DIRECTION OF

THE ATTACHMENT DEPENDS ON

THE COUPLING OF THE

ATTACHMENT HOSES. MAKE SURE

THAT THERE ARE NO PERSONS IN

THE DANGER AREA WHEN

TESTING THE OPERATING

DIRECTIONS. CHANGE THE

COUPLING OF THE HOSES IF

NECESSARY.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Avant 635 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Avant 635

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info