Bedienungsanleitung Avaya 4610 (Seite 45 von 64) (Englisch)

6147

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Function Key Programming Function Keys - Page 45

IP Office 4610 User’s Guide Function Keys - Page 45

40DHB0002USFA – Issue 1 (9th February 2005) Function Key Programming

Listn - Call Listen

Allow the extension to listen to groups calls to the target extension. The call parties

cannot hear the listening extension.

This function requires entry of the target extension number when programmed. This

function cannot be programmed through the phone by the user.

The

Listn key shows the target extension number.

Use of this function requires setup of the extension's monitor group by the System

Administrator. This function requires the telephone system to have some free

conference capacity when invoked.

[User | Digital Telephony | Advanced | Call | Call Listen]

See also:

• Intru - Call Intrude on page 44.

• Recor - Call Record on page 52.

• Steal - Call Steal on page 52.

Logs the current user onto the extension.

This function does not require any data to be entered when programmed. The user

cannot program this function through the phone. Pressing the soft key login prompts

the user Enter Extn:. The user enters the desired extension and presses the soft

function key Next. The user is prompted for the password. The user enters the

password and presses the soft function key “Done.”

[User | Digital Telephony | Advanced | Extn | Extn Login]

Logof - Extn Logout

Logs the current user off the extension.

This function does not required any data to be entered when programmed. This

function cannot be programmed through the phone by the user.

Pressing Logof logs the current user off the extension. A new user must then log

on to use the extension or dial *36 to re-associate the extension with its default user.

[User | Digital Telephony | Advanced | Extn | Extn Logout]

Music - Hold Music

Plays the telephone system's music on hold.

This function does not required any data to be entered when programmed. This

function cannot be programmed through the phone by the user.

Pressing

Music plays the telephone system's music on hold through the extension.

[User | Digital Telephony | Advanced | Hold | Hold Music]

NATim - Set No Answer Time

Sets the extension's no answer time after which ringing calls are forwarded or go to

voicemail.

This function requires the time in seconds to be entered when programmed. The value

is shown next to NATim. This function cannot be programmed through the phone by

the user.

Pressing

NATim sets the extension's no answer time to the indicated number of

seconds. This time is used to set a delay between ending one call and the next call

ringing the extension (the waiting call may be indicated on the display however).

[User | Digital Telephony | Advanced | Set | Set No Answer Time]

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Avaya 4610 Seite 45

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Avaya 4610

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info