6151
64
Zoom out
Zoom in
Vorherige Seite
1/70
Nächste Seite
Page 64 - Resetting the IP Telephone Management and Troubleshooting
Page 64 - Management and Troubleshooting IP Office (R3.0) 4620SW + EU24 User’s Guide
Resetting the IP Telephone 40DHB0002USEP – Issue 1 (13th January 2005)
Resetting the IP Telephone
Reset your IP Telephone when other troubleshooting suggestions do not correct the
problem or after being advised to do so by your System Administrator.
Resetting Your Phone
This basic reset procedure should resolve most problems.
1. Press the Mute button.
2. Using the dial pad, press the following keys in sequence: 73738#
The display shows the message “Reset values? * = no # = yes.”
3. Choose one of the following:
If you want to reset the phone without resetting any assigned values, press *
(asterisk).
- A confirmation tone sounds and the display prompts “Restart phone?
* = no
# = yes.”
If you want to reset the phone and any previously assigned (programmed)
values, press # (the pound key). (Use this option only if your phone has
programmed, static values)
- The display shows the message “Resetting values” while your IP
Telephone resets its programmed values, such as the IP address, to its
default values, and re-establishes the connection to the server. The display
then prompts “Restart phone?
* = no
# = yes.”
Note: Any reset/restart of your phone may take a few minutes.
Power Cycling Your Phone
Use the power cycle with your System Administrator’s approval only if the basic or
programmed reset procedure cannot be performed or does not correct the problem:
1. Unplug the phone and plug it back in.
The phone connection is re-established.
2. If power-cycling does not correct the problem, your System Administrator can
perform a more severe power cycle routine by unplugging both the phone and the
Ethernet cables.
WARNING: Because the type of power cycle mentioned in Step 2 involves re-
programming certain values, it should only be performed by your
System Administrator.
64

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Avaya 4620 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Avaya 4620

Avaya 4620 Bedienungsanleitung - Holländisch - 98 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info