Bedienungsanleitung Avenli 17792 (Seite 7 von 21) (Deutsch, Englisch, Holländisch)

765052

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

1312

OP1-20-GB(V3) OP1-20-GB(V3)

PART8-TROUBLE SHOOTING

Repair Patch Instructions

(Small pinhole and small puncture leaks can be repaired with the included repair patch)

a) Locate the leak place.

b) Deate the air.

c) Clean the area surrounding the leakage and wipe up all water from the surface.

d) Take out the repair patch, cut it into required shape and size, which should be larger than the leaking area, put the patch

on leaking area and press tightly.

e) Wait 30 minutes for open-air drying of the repaired position.

If the damage is too big, we recommend using a Silicone or rubber based glue for repair.

Repair Glue Instructions

1 Locate the leak place.

2 Deate(if necessary),and drain thoroughly

3 Clean the area surrounding the leakage and wipe up all water from the surface.

4 Thoroughly clean the area surrounding the leak .Cut a piece of repair material in round shape, which should be larger than

the damaged area.

5 Gluing (need to purchase adhesive separately) one side of the material patch to the repair area. Please notice the material

patch need to be applied glue evenly.

6 Put the patch on the damaged area and press tightly. Wait 12 hours for drying. After patch has dried, apply glue around the

edges for a complete seal (dry 4 hours) swimming pool storage.

PART9-LIMITED WARRANTY

If any of the components have been consumer-replaced, damaged, or misused, the corresponding warranty on those compo-

nents is invalidated. In this situation, you will be advised of the cost of replacement parts and processing instructions.

If a veriable manufacturing defect is found during the relevant time period, we agree to repair or replace at its option any

product under warranty provided proper proof of purchase is presented.

This limited warranty is not valid if the product is used for commercial purposes, or if the damage is caused by an accident, an

act of God, consumer misuse, neglect or abuse, vandalism, improper use of chemicals, exposure to extreme weather condi-

tions or negligence during product set up or disassembly.

We cannot be held responsible for the cost of installation, labor, or transportation expenses incurred due to the replacement of

defective parts. This limited warranty, furthermore, does not cover any unauthorized alterations to the product.

PROBLEM DESCRIPTION CAUSE REMEDY

FILLED

POOL

IS NOT

ROUND

• Pool has taken on an oval, rectan-

gular or “egg-like” shape.

• Pool appears to slope to one side

or pool water depth is uneven.

• Wrinkles in bottom of liner were

not adequately smoothed out prior

to filling.

• Side walls were not properly

“pushed out” as pool was filled,

causing circumference of top ring

to be outside that of the pool's side

walls.

• Pool is resting on bumpy or slop-

ing ground.

• Drain pool to a 1” water depth and

then smooth out as many wrinkles

as possible.

• Drain pool to a 1” water depth and

then push out side walls until they

are outside of the circumference of

the top ring.

• Make sure ground underneath

pool is very flat, level and free of

any mounds of soil.

COLORED

WATER

• Water turns blue, brown, or black

when first treated with chlorine.

• The chlorine is oxidizing minerals

in your water. This commonly occurs

with water from different sources.

• Adjust pH to recommended level.

• Run filter until water is clear.

• Regularly clean cartridge.

PARTICALS

SUSPENDED

IN WATER

• Water looks “milky” or cloudy.

• “Hard Water” caused by an elevat-

ed pH.

• Chlorination is inadequate.

• Foreign debris in water.

• Bathers are not cleaning their feet

prior to entering pool.

• Adjust pH. Check with a swimming

pool supply retailer for correct water

treatment.

• Ensure proper chlorine level.

• Clean or replace your filter.

• Spray off dirt with a high-pressure

hose before entry.

PERSISTENT

LOW WATER

LEVEL

• Pool appears to be losing water on

a daily basis.

• Tear or hole in pool liner.

• Tear or hole in a filter pump hose.

• Hose clamps are too loose.

• Evaporation from high summer

temperatures.

• Locate damage and repair with the

included patch kit.

• Repair or replace hoses.

• Tighten all hose clamps.

• Keep pool covered when not in

use.

ALGAE

• Water has greenish tint.

• Green, brown or black spots

appear on pool liner.

• Pool bottom is slippery and/or an

unpleasant odor is present.

• Algae is present.

• Apply “shock” treatment (super-

chlorinator). Check pH and adjust to

an appropriate level per your local

pool supply retailer.

• Vacuum or lightly scrub pool liner.

• Test water often to maintain proper

chlorine levels.

POOL

WATER

IS COOL

• Water is not warming to a comfort-

able swimming temperature.

• Pool was set up in an excessively

shady or tree lined area.

• Heat is escaping from pool water.

• Relocate pool to a more open

location where it can get maximum

exposure to sunlight during peak

daylight hours.

• Keep your pool covered whenever

it is not in use.

PART8-TROUBLE SHOOTING

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Avenli 17792 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info