Bedienungsanleitung Avenli 17823 (Seite 19 von 39) (Deutsch, Englisch, Holländisch)

765061

Zoom out

Zoom in

Vorherige Seite

1/39

Nächste Seite

MFP-20-GB(V1)

PART9-LIMITED WARRANTY

If any of the components have been consumer-replaced, damaged, or misused, the corresponding warranty on those compo-

nents is invalidated. In this situation, you will be advised of the cost of replacement parts and processing instructions.

If a veriable manufacturing defect is found during the relevant time period, we agree to repair or replace at its option any

product under warranty provided proper proof of purchase is presented.

This limited warranty is not valid if the product is used for commercial purposes, or if the damage is caused by an accident, an

act of God, consumer misuse, neglect or abuse, vandalism, improper use of chemicals, exposure to extreme weather condi-

tions or negligence during product set up or disassembly.

We cannot be held responsible for the cost of installation, labor, or transportation expenses incurred due to the replacement of

defective parts. This limited warranty, furthermore, does not cover any unauthorized alterations to the product.

PART8-TROUBLE SHOOTING

PROBLEM DESCRIPTION CAUSE REMEDY

COLORED

WATER

• Water turns blue, brown, or black

when first treated with chlorine.

• The chlorine is oxidizing minerals

in your water. This commonly occurs

with water from different sources.

• Adjust pH to recommended level.

• Run filter until water is clear.

• Regularly clean cartridge.

PARTICALS

SUSPENDED

IN WATER

• Water looks “milky” or cloudy.

• “Hard Water” caused by an elevat-

ed pH.

• Chlorination is inadequate.

• Foreign debris in water.

• Bathers are not cleaning their feet

prior to entering pool.

• Adjust pH. Check with a swimming

pool supply retailer for correct water

treatment.

• Ensure proper chlorine level.

• Clean or replace your filter.

• Spray off dirt with a high-pressure

hose before entry.

PERSISTENT

LOW WATER

LEVEL

• Pool appears to be losing water on

a daily basis.

• Tear or hole in pool liner.

• Tear or hole in a filter pump hose.

• Hose clamps are too loose.

• Evaporation from high summer

temperatures.

• Locate damage and repair with the

included patch kit.

• Repair or replace hoses.

• Tighten all hose clamps.

• Keep pool covered when not in

use.

ALGAE

• Water has greenish tint.

• Green, brown or black spots

appear on pool liner.

• Pool bottom is slippery and/or an

unpleasant odor is present.

• Algae is present.

• Apply “shock” treatment (super-

chlorinator). Check pH and adjust to

an appropriate level per your local

pool supply retailer.

• Vacuum or lightly scrub pool liner.

• Test water often to maintain proper

chlorine levels.

POOL

WATER

IS COOL

• Water is not warming to a comfort-

able swimming temperature.

• Pool was set up in an excessively

shady or tree lined area.

• Heat is escaping from pool water.

• Relocate pool to a more open

location where it can get maximum

exposure to sunlight during peak

daylight hours.

• Keep your pool covered whenever

it is not in use.

Deformation

from frame Did not fill with water to water level Suggest continue to fill with water to

water level

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Avenli 17823 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info