Bedienungsanleitung AVM Fritz Repeater 3000 (Seite 7 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch)

722161

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

9. After the ﬁ nal conﬁ guration step, disconnect the LAN cable from the computer and

connect the FRITZ!Repeater 3000 with your FRITZ!Box (router).

Enable Mesh (Only with FRITZ!Box Software FRITZ!OS 7 or Newer)

1. Make sure that the FRITZ!Repeater 3000 is connected with your FRITZ!Box (router) via

LAN cable. The LED for connection quality lights up green.

2. Press the “Connect” button. The “Connect” LED ﬂ ashes.

3. Within 2 minutes, enable Mesh on your FRITZ!Box:

- FRITZ!Box with “WPS" or “Connect/WPS” button: Press button brieﬂ y.

- FRITZ!Box with “WLAN” or “WLAN/WPS” button: Press button for at least 6 seconds

When Mesh is enabled, the FRITZ!Repeater is marked with the

Mesh enabled symbol

under “Home Network / Mesh” in the user interface of the FRITZ!Box The FRITZ!Repeater

3000 adopts all of its wireless LAN settings from the FRITZ!Box, including the wireless

network name (SSID) and network key.

More detailed information about the beneﬁ ts and the conﬁ guration of Mesh is

presented in the PDF manual and at en.avm.de/mesh-networking.

FRITZ!Repeater 3000 in the Home Network

FRITZ!Repeater 3000 on a FRITZ!Box with Mesh

In the home network of a FRITZ!Box with Mesh (FRITZ!OS 7 or higher), operation of your

FRITZ!Repeater 3000 is especially easy and convenient.

• When Mesh is enabled, all of the FRITZ!Box’s wireless LAN settings are permanently

adopted.

• Updates for the FRITZ!Repeater 3000 can be performed directly in the FRITZ!Box user

interface under “Home Network / Mesh”.

• Mesh WiFi provides for the optimum wireless connections of all wireless devices.

During conﬁ guration at the press of a button (see from pageSeite 8), the

FRITZ!Repeater 3000 is automatically enabled for Mesh. When “LAN bridge”

access mode is conﬁ gured, Mesh has to be enabled; see page Seite 12.

FRITZ!Repeater 3000 on a FRITZ!Box without Mesh or a Wireless Router

from Another Manufacturer

• During conﬁ guration the FRITZ!Repeater 3000 adopts the wireless network name and

password of the FRITZ!Box (wireless router).

• If the wireless network name and/or password is changed in the FRITZ!Box (wireless

router), the Repeater has to be reconnected.

• Settings and updates for the FRITZ!Repeater 3000 are conﬁ gured and performed via

the FRITZ!Repeater user interface.

Opening the User Interface of the FRITZ!Repeater 3000

• With a FRITZ!Box:

Enter

http://fritz.repeater in the web browser on a connected device to open the user

interface of the FRITZ!Repeater 3000. Perform any update available under “System /

Update”.

• With another wireless router:

1. Open the user interface of the your wireless router to determine the IP address

assigned to the FRITZ!Repeater 3000.

2. Then enter the IP address in the address bar of a new web browser window to open

the FRITZ!Repeater 3000 user interface.

3. Secure your FRITZ!Repeater 3000 with a password the ﬁ rst time you open the user

interface.

4. Perform any update available under “System / Update”.

1312

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

AVM Fritz Repeater 3000 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von AVM Fritz Repeater 3000

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info