559131
155
Zoom out
Zoom in
Vorherige Seite
1/159
Nächste Seite
Installation,
configuration
and operation
FRITZ!Box
Fon WLAN 7570 vDSL
FRITZ!Box Fon WLAN 7570 vDSL 2
Legal Notice
Legal Notice
FRITZ!Box Fon WLAN 7570 vDSL
This documentation and the software it describes are protected by copyright. AVM grants the non-
exclusive right to use the software, which is supplied exclusively in object code format. The licensee
may create only one copy of the software, which may be used exclusively for backup use.
AVM reserves all rights that are not expressly granted to the licensee. Without previous approval in
writing, and except for in cases permitted by law, it is particularly prohibited to
copy, propagate or in any other manner make this documentation or this software publicly ac-
cessible, or
process, disassemble, reverse engineer, translate, decompile or in any other manner open the
software and subsequently copy, propagate or make the software publicly accessible in any
other manner.
Please consult the “License.txt” file on the product CD included in the package for specifics about
the licensing conditions.
This documentation and software have been produced with all due care and checked for correct-
ness in accordance with the best available technology. AVM GmbH disclaims all liability and warran-
ties, whether express or implied, relating to the AVM product’s quality, performance or suitability for
any given purpose which deviates from the performance specifications contained in the product de-
scription. The licensee bears all risk in regard to hazards and impairments of quality which may
arise in connection with the use of this product.
AVM will not be liable for damages arising directly or indirectly from the use of the manual or the
software, nor for incidental or consequential damages, except in case of intent or gross negligence.
AVM expressly disclaims all liability for the loss of or damage to hardware or software or data as a
result of direct or indirect errors or destruction and for any costs (including connection charges) re-
lated to the documentation and the software and due to incorrect installations not performed by
AVM itself.
The information in this manual and the software are subject to change without notice for the pur-
pose of technical improvement.
We offer a manufacturer’s warranty for this original product. The conditions of this warranty are con-
tained in the “Warranty.pdf” file in the “Info” folder on the product CD included with delivery.
© AVM GmbH 2008-2009. All rights reserved. Documentation release 09/2009
AVM in the Internet: www.avm.de/en
Trademarks: Unless otherwise indicated, all trademarks mentioned are legally protected trademarks
owned by AVM GmbH, especially product names and logos. Microsoft, Windows and the Windows lo-
go are trademarks owned by Microsoft Corporation in the USA and/or other countries. Bluetooth is a
trademark of Bluetooth SIG, Inc. licensed to AVM GmbH. All other products and company names are
trademarks of their respective owners.
AVM Audiovisuelles Marketing
und Computersysteme GmbH
Alt-Moabit 95
AVM Computersysteme
Vertriebs GmbH
Alt-Moabit 95
D 10559 Berlin D 10559 Berlin
Contents
FRITZ!Box Fon WLAN 7570 vDSL 3
Contents
I CONNECTING AND OPERATION 7
1 Security and Handling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
2 FRITZ!Box Fon WLAN 7570 vDSL . . . . . . . . . . . . . . . . . . . . . . 9
2.1 Package Contents. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2.2 Operation Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
3 Connecting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
3.1 Launching Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
3.2 Mounting on a Wall . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
3.3 Connecting to Electrical Power . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .16
3.4 Connecting the Computer(s) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
3.5 Connecting Computer(s) to the LAN Port . . . . . . . . . . . . . . . . . . . . . . . .18
3.6 Connecting Computer(s) Wirelessly via WLAN . . . . . . . . . . . . . . . . . . . 20
3.7 Connecting to the DSL/VDSL Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .23
3.8 Connecting to the ISDN Line . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24
3.9 Connecting with the Analog Telephone Line . . . . . . . . . . . . . . . . . . . . .25
3.10 Connecting Telephone, Fax, or Answering Machine. . . . . . . . . . . . . . . 26
3.11 Connecting ISDN Telephones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27
3.12 Connecting ISDN PBXs. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
4 Opening the User Interface . . . . . . . . . . . . . . . . . . . . . . . . 29
5 Internet Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
5.1 Configuring the Internet Connection Using the Wizard . . . . . . . . . . . . .30
5.2 Configuring the Internet Connection Manually. . . . . . . . . . . . . . . . . . . .30
6 The DECT Function . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
6.1 Registering Cordless Phones. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .32
6.2 Making an Internal Call to a Cordless Phone . . . . . . . . . . . . . . . . . . . . .33
6.3 Logging a Cordless Phone off of the FRITZ!Box . . . . . . . . . . . . . . . . . . .33
6.4 Switching the DECT Function On and Off . . . . . . . . . . . . . . . . . . . . . . . .34
FRITZ!Box Fon WLAN 7570 vDSL 4
Contents
7 Telephone Connections . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
7.1 Entering Your Phone Numbers. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .35
7.2 Configuring Telephony Equipment . . . . . . . . . . . . . . . . . . . . . . . . . . . . .36
7.3 Functions and Settings for Telephony. . . . . . . . . . . . . . . . . . . . . . . . . . .38
7.4 The Answering Machine Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
8 USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
8.1 Connecting USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .42
8.2 Accessing USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
8.3 FRITZ!Box USB Remote Connection. . . . . . . . . . . . . . . . . . . . . . . . . . . . .43
8.4 USB Mass Storage Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .46
8.5 USB Printers . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48
8.6 FRITZ!WLAN USB Stick N and FRITZ!WLAN USB Stick. . . . . . . . . . . . . . .54
8.7 USB Hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .55
8.8 Tips for Using USB Devices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .56
9 Configuration and Operation at the Telephone . . . . . . . . 57
9.1 Configuring at the Telephone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
9.2 Operation at the Telephone. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75
10 Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
10.1 Errors Opening the User Interface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .91
10.2 The WLAN Adapter Cannot Find FRITZ!Box . . . . . . . . . . . . . . . . . . . . . . .97
10.3 WLAN Connection Is Not Established . . . . . . . . . . . . . . . . . . . . . . . . . . 99
10.4 IP Settings. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .102
11 Uninstallation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
11.1 Disconnecting the FRITZ!Box from the Computer. . . . . . . . . . . . . . . . .107
11.2 Removing the Printer Port . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 107
11.3 Removing the Program Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108
Contents
FRITZ!Box Fon WLAN 7570 vDSL 5
12 Directions for Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .110
12.1 Symbols and Highlighting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110
12.2 The Telephone Keypad. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
12.3 Instructions for Operation at the Telephone . . . . . . . . . . . . . . . . . . . . 111
12.4 LEDs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
12.5 Handset and Ring Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
II PRODUCT DETAILS AND USEFUL INFORMATION 114
1 Product Details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .114
1.1 Cables and Buttons . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114
1.2 WLAN Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
1.3 DECT Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 115
1.4 Technical Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116
1.5 Declaration of CE Conformity. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 118
1.6 Disposal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 119
2 More about WLAN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120
2.1 Standards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .120
2.2 Security. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .122
2.3 Frequency Ranges . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
3 More about Network Settings . . . . . . . . . . . . . . . . . . . . . 128
3.1 IP Address. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .129
3.2 DHCP Server . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131
3.3 Subnetwork . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
4 More about Internet Telephony . . . . . . . . . . . . . . . . . . . . 136
4.1 Telephony Scenarios . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .136
4.2 Bandwidth Management . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 137
FRITZ!Box Fon WLAN 7570 vDSL 6
Contents
5 Customer Service Guide . . . . . . . . . . . . . . . . . . . . . . . . . . 138
5.1 Documentation. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .138
5.2 Information in the Internet . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
5.3 Updates and Software . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
5.4 Support from the AVM Service Team. . . . . . . . . . . . . . . . . . . . . . . . . . .140
6 Glossary. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .157
Security and Handling
FRITZ!Box Fon WLAN 7570 vDSL 7
I CONNECTING AND OPERATION
1 Security and Handling
What to watch out for
Security When working with the FRITZ!Box Fon WLAN 7570 vDSL, ob-
serve the following security instructions in order to protect
yourself and the FRITZ!Box from harm.
Do not install the FRITZ!Box during an electrical storm.
Disconnect FRITZ!Box from the power supply during
electrical storms.
Never let liquids get inside the FRITZ!Box. Otherwise,
electric shocks or short circuits may result.
The FRITZ!Box is intended for indoor use only.
Do not open the FRITZ!Box housing. The device con-
tains hazardous components and should only be
opened by authorized repair technicians.
Handling You can either place FRITZ!Box on a horizontal surface or
mount it on a wall. Please note the following:
Place or hang the FRITZ!Box in a dry location that is
free of dust and protected from direct sunlight.
Do not place FRITZ!Box on excessively heat-sensitive
surfaces, as the base of the device can heat up during
normal operation.
When connecting to your FRITZ!Box computer using
the network, remember to take the length of the cable
into account.
If you would like to establish wireless connections be-
tween FRITZ!Box and the computer, position the de-
vice at a central location.
Make sure to keep sufficient distance from potential
sources of interference like microwave devices or elec-
tric devices with large metal housings.
FRITZ!Box Fon WLAN 7570 vDSL 8
Security and Handling
For detailed information about the symbols, numerals and
function keys used in the manual, see the section “Direc-
tions for Operation” from page 110.
FRITZ!Box Fon WLAN 7570 vDSL
FRITZ!Box Fon WLAN 7570 vDSL 9
2 FRITZ!Box Fon WLAN 7570 vDSL
An Overview
The FRITZ!Box Fon WLAN 7570 vDSL is a Private Branch Exchange (PBX)
for making telephone calls via the Internet and the fixed-line network.
The FRITZ!Box connects your computers directly with your DSL line. Each
connected computer can establish an Internet connection over the
FRITZ!Box. As a WLAN access point, FRITZ!Box offers you the possibility of
connecting your computer to the DSL or VDSL line wirelessly.
Possibilities for connecting FRITZ!Box
PBX FRITZ!Box is a PBX for the connection of analog and ISDN
terminal devices. You can connect two analog telephones
to FRITZ!Box. Up to eight ISDN telephony devices can be
connected to the integrated ISDN S
0
port. You can make
telephone calls using the Internet, ISDN, or the analog
fixed-line network using all of the connected telephones.
Using Cordless
Phones
Thanks to the DECT function, the FRITZ!Box can be used as
a basis station for cordless phones. Every cordless phone
that supports the DECT-GAP standard can be registered at
the FRITZ!Box.
FRITZ!Box Fon WLAN 7570 vDSL 10
FRITZ!Box Fon WLAN 7570 vDSL
Connecting
Computers
Four computers can be connected directly to the FRITZ!Box
using the four LAN ports.
You can also connect a network hub or switch to the LAN
ports so that even more computers can be connected to
FRITZ!Box.
WLAN Access
Point
The FRITZ!Box is a WLAN access point. All computers
equipped with a WLAN adapter can be wirelessly connected
to the FRITZ!Box.
Local Network All of the computers connected with the FRITZ!Box consti-
tute a network and can share access to any files released
for file sharing.
Internet All of the computers connected to the FRITZ!Box can access
the Internet.
The FRITZ!Box works as a DSL router, making the Internet
connection available to all connected computers. All con-
nected computers can then use the Internet connection at
the same time.
Firewall The FRITZ!Box is equipped with an integrated firewall.
When the FRITZ!Box Fon WLAN 7570 vDSL is operated as a
router, this firewall protects your network from attacks from
the Internet.
USB Port The FRITZ!Box is equipped with a USB host controller to
which you can connect a USB storage device (hard drive,
stick), a printer, an AVM FRITZ!WLAN USB Stick N, an AVM
FRITZ!WLAN USB Stick or a USB hub.
The USB port supports the USB 1.1 and USB 2.0 standards.
If you use AVM’s FRITZ!WLAN USB Stick N or the
FRITZ!WLAN USB Stick, AVM Stick & Surf technology is at
your disposal. Use Stick & Surf to adopt the WLAN security
settings from the FRITZ!Box quickly and conveniently.
For connecting a printer, FRITZ!Box has a printer server.
Media Server An integrated media server makes music files available in
the local network. Music files from a USB stick can be made
available even when the computer is switched off.
Package Contents
FRITZ!Box Fon WLAN 7570 vDSL 11
Network Devices Other network devices can also be connected to the net-
work ports of the FRITZ!Box, for instance game consoles.
Operating
Systems
Supported
The FRITZ!Box can be connected to computers with Win-
dows operating systems, the Linux operating system or
Apple computers with the Mac OS X operating system.
2.1 Package Contents
The following is included in the FRITZ!Box Fon WLAN 7570
vDSL package:
FRITZ!Box Fon WLAN 7570 vDSL
one power supply unit with a cable for connection to
the power mains
one DS cable (gray) for connection to a DSL/VDSL and
one telephone cable (green) for connection to a tele-
phone line (ISDN or analog)
one network cable (yellow) for connection to a com-
puter or a network
one RJ45/RJ11 adapter (gray) for the DSL or VDSL line
(required in some countries)
one RJ45/RJ11 adapter (black) for connecting FRITZ!Box
Fon WLAN 7570 vDSL to the analog telephone network
two TAE/RJ11 adapters for connecting analog terminal
equipment (telephone, answering machine, fax)
one FRITZ!Box CD with
Installation Help
software for the printer port
documentation for all enclosed AVM products
printed installation manual
one wall holder for fastening the FRITZ!Box Fon WLAN
7570 vDSL on the wall
FRITZ!Box Fon WLAN 7570 vDSL 12
Operation Requirements
2.2 Operation Requirements
In order to operate the FRITZ!Box, you must have the fol-
lowing:
a Web browser that supports Java script (for instance,
Internet Explorer version 6.0 or higher, or Firefox
version 1.5 or higher)
DSL line compliant with ITU G.992.1, ITU G.992.3, ITU
G.992.5, or a VDSL line
for connection via WLAN:
computer with a WLAN adapter compliant with
IEEE 802.11n draft 2.0, IEEE 802.11g, IEEE 802.11a or
IEEE 802.11b, for example a FRITZ!WLAN USB Stick N
for connection via network cable:
computer with a network port (network adapter stan-
dard Ethernet 10/100 Base-T)
for fixed-line telephony:
an ISDN point-to-multipoint line in accordance with
the Euro ISDN protocol DSS1, or an analog telephone
line
to install the DSL software FRITZ!DSL, the minimum
computer requirements are:
Pentium III processor (or comparable) with
Windows Vista (32-bit) or Windows XP (32-bit) and
CD drive
128 MB RAM
40 MB free memory on the hard drive
Connecting
FRITZ!Box Fon WLAN 7570 vDSL 13
3Connecting
Connecting FRITZ!Box
This chapter contains instructions on the following topics:
launching FRITZ!Box operation
connecting FRITZ!Box to electrical power
connecting one or several computers to the FRITZ!Box
connecting FRITZ!Box to DSL/VDSL
connecting FRITZ!Box to ISDN or the analog telephone line
connecting ISDN terminal devices to the FRITZ!Box
connecting analog terminal devices to the FRITZ!Box
3.1 Launching Operation
Using the Installation Help on the CD
On computers with Windows operating systems you can
use the Installation Help on the FRITZ!Box CD. The Installati-
on Help presents instructions on the screen, guiding you
through the steps required to launch operation of the
FRITZ!Box.
1. Insert the FRITZ!Box CD in the CD-ROM drive of your
computer.
The Installation Help starts automatically.
2. Follow the instructions in the Installation Help to pre-
pare the FRITZ!Box for operation.
Please see the instructions about the placement of the
FRITZ!Box in section “Security and Handling” on page 7.
We recommend using the Installation Help on the
FRITZ!Box CD when launching operation of the FRITZ!Box
for the first time.
FRITZ!Box Fon WLAN 7570 vDSL 14
Launching Operation without the Installation Help CD
At the conclusion of the Installation Help, you will be routed
directly to the FRITZ!Box user interface.
Launching Operation without the Installation Help CD
If you do not want to use the Installation Help on the
FRITZ!Box CD, then work through the instructions below in
the recommended order:
1. Placement of FRITZ!Box; see the section “Security and
Handling” from page 7.
2. Connect FRITZ!Box to the power supply; see the sec-
tion “Connecting to Electrical Power” on page 16.
3. Connect FRITZ!Box to the computer(s); see the section
“Connecting the Computer(s) on page 17.
4. Connect FRITZ!Box to DSL/VDSL; see “Connecting to
the DSL/VDSL Line” from page 23.
5. If you want to make telephone calls with the fixed-line
network using FRITZ!Box:
If you have an ISDN line, please read the section
“Connecting to the ISDN Line” on page 24.
If you have an analog line, please read the section
“Connecting with the Analog Telephone Line” on
page 25.
6. If you want to make telephone calls using the Internet
and/or the fixed-line network, connect your analog
equipment to the FRITZ!Box; see the section “Connect-
ing Telephone, Fax, or Answering Machine” on
page 26.
7. If you want to connect an ISDN telephone or an ISDN
PBX to the FRITZ!Box, please read the sectionsCon-
necting ISDN Telephones” on page 27 as well as “Con-
necting ISDN PBXs” on page 28.
Mounting on a Wall
FRITZ!Box Fon WLAN 7570 vDSL 15
3.2 Mounting on a Wall
Mount the wall holder included in the package on the wall.
Mounting the wall holder for the FRITZ!Box
Place the FRITZ!Box on the wall holder and slide it into posi-
tion.
FRITZ!Box Fon WLAN 7570 vDSL 16
Connecting to Electrical Power
Attaching the FRITZ!Box to the wall holder
3.3 Connecting to Electrical Power
Connecting to the power supply
Connecting Set aside the power supply unit out of the FRITZ!Box package.
Connecting the Computer(s)
FRITZ!Box Fon WLAN 7570 vDSL 17
1. Connect the power supply unit to the socket on the
FRITZ!Box labeled “Power”.
2. Plug the other end into an AC power outlet.
The green “Power/DSL” LED will begin flashing after a few
seconds.
3.4 Connecting the Computer(s)
If you would like to surf the web using the FRITZ!Box or to
open the FRITZ!Box user interface, then you must connect a
computer with the FRITZ!Box.
A computer can be connected with the FRITZ!Box in two dif-
ferent ways:
via a LAN port
wirelessly via WLAN
Connection
Scenarios
Note the following when connecting computers to the
FRITZ!Box:
One computer can be connected to the FRITZ!Box by
only one of these means.
At each of the network ports of the FRITZ!Box, a com-
puter can be connected directly or via a hub/switch.
Using WLAN you can connect multiple computers with
the FRITZ!Box at the same time.
The computer is connected to the FRITZ!Box in the
same way regardless of the operating system on the
computer.
All of the computers connected with the FRITZ!Box
constitute a network.
FRITZ!Box Fon WLAN 7570 vDSL 18
Connecting Computer(s) to the LAN Port
3.5 Connecting Computer(s) to the LAN Port
If you want to connect a computer to one of the four LAN
ports on the FRITZ!Box, make sure that your computer is
equipped with a network adapter. A LAN port is usually des-
ignated by the icon at left or labeled “LAN”.
Connecting a computer to a LAN port on the FRITZ!Box
Connecting Set aside the network cable (yellow) from the FRITZ!Box
package.
1. Switch on your computer.
If you work with a Linux operating system, use YaST to
configure your network card with the setting “DHCP”,
if this setting is not already configured.
2. Insert one end of the LAN cable to the computer’s net-
work adapter.
3. Connect the other end of the LAN cable to a socket on
the FRITZ!Box labeled “LAN 1”, “LAN 2”, “LAN 3” or
“LAN 4”.
Now the FRITZ!Box and computer are connected to each
other.
Connecting More Computers to the LAN Ports
FRITZ!Box Fon WLAN 7570 vDSL 19
Connecting More Computers to the LAN Ports
Additional cables are required to connect further comput-
ers. In purchasing a LAN cable, note the instructions in the
section “Network Cable” on page 115.
You can connect a computer to any of the four LAN ports of
the FRITZ!Box at any time.
Connecting a Network Hub or Switch
You can connect a network hub or switch to one of the LAN
ports on the FRITZ!Box if you would like to connect multiple
computers to the FRITZ!Box via LAN.
Connecting FRITZ!Box to a network hub
Connecting Set aside the network cable (yellow) from the FRITZ!Box
package.
FRITZ!Box Fon WLAN 7570 vDSL 20
Connecting Computer(s) Wirelessly via WLAN
1. Connect one end of the LAN cable to the uplink port of
the network hub or switch.
2. Connect the other end of the cable to one of the LAN
sockets on the FRITZ!Box.
The FRITZ!Box and the network hub are now connected with
each other.
3.6 Connecting Computer(s) Wirelessly via WLAN
Using WLAN you can connect one or multiple computers wi-
th the FRITZ!Box wirelessly.
The wireless WLAN connection is independent of the oper-
ating system used. Each computer to be connected to the
FRITZ!Box via WLAN must support WLAN, by means of a
compatible WLAN adapter, for instance the
FRITZ!WLAN USB Stick N.
Connecting the FRITZ!WLAN USB Stick
Connect If you are using a AVM FRITZ!WLAN USB Stick N or a AVM
FRITZ!WLAN USB Stick as a WLAN adapter, you can transmit
the security settings of the FRITZ!Box to your FRITZ!WLAN
Stick quickly and conveniently using AVM Stick & Surf. Pro-
ceed as follows to do so (described here using the example
of the FRITZ!WLAN USB Stick N):
1. Switch on your computer.
2. Insert the AVM FRITZ!WLAN USB Stick N into the USB
port on the FRITZ!Box. The “INFO” LED on the
FRITZ!Box begins flashing rapidly.
The WLAN security settings are being transferred to
the FRITZ!WLAN USB Stick N. As soon as the “INFO”
LED stops flashing, transmission of the settings has
been concluded.
3. Remove the FRITZ!WLAN USB Stick N.
For more information on WLAN, see the section “More
about WLAN” from page 120.
Using WLAN adapters from Other Manufacturers
FRITZ!Box Fon WLAN 7570 vDSL 21
4. Now insert the FRITZ!WLAN USB Stick N in the USB
port of the computer.
The security settings saved on the FRITZ!WLAN USB Stick N
are applied to the computer. Now the FRITZ!Box and
FRITZ!WLAN USB Stick N are connected with each other
wirelessly
Using WLAN adapters from Other Manufacturers
Installing Proceed as follows to install a WLAN adapter from another
manufacturer:
1. Switch on your computer.
2. Install the WLAN adapter in your computer along with
the appropriate software. Please take note of the in-
structions in the documentation of the adapter.
3. In order to establish a WLAN connection to the
FRITZ!Box, you must either use the WLAN software supp-
lied with the operating system, or the manufacturer’s
WLAN software included in the WLAN adapter package.
Establishing a
Connection
The FRITZ!Box is delivered with preset values for WLAN se-
curity. You must enter these values during the configuration
of the WLAN adapter.
If you would like to establish a WLAN connection using
these preset values, then your WLAN adapter must support
WPA or WPA2 encryption.
1. Start the WLAN software.
2. Enter the following for the connection between the
FRITZ!Box and the WLAN adapter:
For more information, see the manual for the AVM
FRITZ!WLAN USB Stick N or the manual for the AVM
FRITZ!WLAN USB Stick.
FRITZ!Box Fon WLAN 7570 vDSL 22
Using WLAN adapters from Other Manufacturers
3. Confirm your entries using the relevant button in the
user interface (for instance, “OK” or “Connect”).
Now your WLAN adapter and the FRITZ!Box are connected
with each other wirelessly.
Please see the instructions in the section “Opening the Us-
er Interface” on page 29. See also the information on WLAN
security in the section“Security” from page 122.
WPA Not
Supported
If your WLAN adapter does not support WPA, you must con-
vert the encryption in the FRITZ!Box to WEP. For this you
must change the WLAN settings in the FRITZ!Box. To do so,
proceed as follows:
1. Connect the FRITZ!Box and the computer using the
network cable (yellow) (see the section “Connecting
Computer(s) to the LAN Port” on page 18).
2. Start a web browser on the computer.
3. Enter fritz.box
in the address line of the browser.
4. Select the “Advanced Settings / WLAN / Security”
menu in the “Settings” area.
5. Then select WEP encryption and enter a network key.
6. Click the “Apply” button.
A window is displayed with the WLAN security settings.
7. Print out the page by clicking the printer icon in the
toolbar.
SSID (name of the
WLAN radio network)
FRITZ!Box Fon WLAN 7570 vDSL
Encryption method WPA (TKIP) or WPA2 (AESCCMP)
Encryption WPA PSK
Key The key is printed on the stickers on
the base of the device and on the
cover of the FRITZ!Box CD.
Network mode Infrastructure
Connecting to the DSL/VDSL Line
FRITZ!Box Fon WLAN 7570 vDSL 23
8. Close the user interface and clear the connection be-
tween the FRITZ!Box and the computer. Remove the
network cable (yellow).
9. Configure your WLAN adapter with the security set-
tings entered in the FRITZ!Box.
The WLAN connection between your WLAN adapter and the
FRITZ!Box will be established.
3.7 Connecting to the DSL/VDSL Line
Connecting to the DSL/VDSL splitter
Connecting The gray cable is for connecting to the DSL/VDSL splitter.
This cable is a combination of a DSL and VDSL cable.
FRITZ!Box Fon WLAN 7570 vDSL 24
Connecting to the ISDN Line
1. Connect the longer of the two gray branches of the ca-
ble to the port labeled “DSL/TEL”.
2. Then connect the other end of the cable to the corre-
sponding socket on the DSL/VDSL splitter. If the end
of the cable does not fit into the socket on the splitter,
insert the end of the cable into the gray RJ45/RJ11
adapter included in the package and then insert the
adapter into the socket on the DSL/VDSL splitter.
The green “Power” LED stops flashing after a short
time and remains lit to signalize that FRITZ!Box is
ready for Internet connections over DSL or VDSL.
3.8 Connecting to the ISDN Line
Your telephone line is either an analog line or an ISDN line.
If you have an ISDN line, read here how to connect the
FRITZ!Box with the ISDN line.
Connecting to the ISDN NT
Connecting with the Analog Telephone Line
FRITZ!Box Fon WLAN 7570 vDSL 25
Connecting Set aside the green cable delivered in the package.
1. Connect one branch of the cable to the socket on the
FRITZ!Box labeled ”.
2. Insert the other branch of the cable into the socket of
your ISDN NT.
Now the FRITZ!Box and the ISDN line are connected.
3.9 Connecting with the Analog Telephone Line
Your telephone line is either an analog line or an ISDN line.
If you have an analog telephone line, read here about how
to connect the FRITZ!Box with the analog telephone line.
Connecting to the analog telephone line via the DSL/VDSL splitter
Connecting Set aside the green cable delivered in the package.
1. Connect the longer gray branch of the cable to the
socket on the FRITZ!Box labeled ”.
FRITZ!Box Fon WLAN 7570 vDSL 26
Connecting Telephone, Fax, or Answering Machine
2. Then insert the black plug into the appropriate socket
of your DSL/VDSL splitter.
If the plug does not fit into the splitter, connect the
end of the cable to the black RJ45/RJ11 adapter includ-
ed in the package and then insert the adapter into the
socket on the DSL/VDSL splitter.
Now the FRITZ!Box and the analog telephone line are con-
nected.
3.10 Connecting Telephone, Fax, or Answering Machine
The FRITZ!Box provides Internet and/or fixed-line telephony
for analog terminal devices.
You can connect two analog terminal devices like tele-
phones, fax machine or answering machine to the
FRITZ!Box. Insert the TAE plug of your analog device in one
of the TAE sockets “FON 1” or “FON 2” located on the back
panel of the FRITZ!Box.
Analog devices with an RJ11 plug are connected to the RJ11
sockets “FON 1” or “FON 2” located on the back panel of the
FRITZ!Box using the TAE/RJ11 adapter included in the package.
Connecting an analog telephone to an RJ11 jack
Connecting ISDN Telephones
FRITZ!Box Fon WLAN 7570 vDSL 27
3.11 Connecting ISDN Telephones
ISDN telephones can be connected to the FRITZ!Box and
used to make calls via the Internet and the fixed-line net-
work. With appropriate cabling, up to eight ISDN tele-
phones can be connected.
Connecting an ISDN telephone to the FRITZ!Box
Connecting Use an ISDN cable to connect an ISDN telephone.
1. Connect one end of the ISDN cable with the ISDN tele-
phone.
2. Connect the other end of the ISDN cable with the “S
0
-
int” port of the FRITZ!Box.
FRITZ!Box Fon WLAN 7570 vDSL 28
Connecting ISDN PBXs
3.12 Connecting ISDN PBXs
If you have an ISDN PBX, you can connect this PBX to the
FRITZ!Box. With the telephones connected to the PBX you
can make calls both via the Internet and via the fixed-line
network.
Connecting an ISDN PBX to the FRITZ!Box
Connecting Use an ISDN cable to connect an ISDN PBX.
1. Connect one end of the ISDN cable with the ISDN PBX.
2. Connect the other end of the ISDN cable with the “S
0
-
int” port of the FRITZ!Box.
The ISDN PBX must support a point-to-multipoint line.
If you have no more than two analog devices con-
nected to the PBX, you can connect them directly to
the FRITZ!Box and do without the PBX.
Opening the User Interface
FRITZ!Box Fon WLAN 7570 vDSL 29
4 Opening the User Interface
fritz.box
The FRITZ!Box has a user interface that can be used in a
web browser.
The user interface presents information about the
FRITZ!Box product, ports and connections. This is also
where you configure settings for operation of the FRITZ!Box.
The user interface can be opened from any computer con-
nected with the FRITZ!Box. The settings are saved in the
FRITZ!Box.
Starting 1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
The “fritz.box” entry in the address field of a web browser
The FRITZ!Box user interface opens.
Saving Settings The settings you made in the FRITZ!Box can be saved as a
file on your computer. This file contains all user-defined
settings, including the account information for the Internet
connection and telephony configuration. This settings file
can be loaded back into your FRITZ!Box at any time.
The FRITZ!Box features a Wizard to accompany you step by
step through the process of saving and restoring your set-
tings.
If the user interface does not open, please see the instruc-
tions in the section “Errors Opening the User Interface” on
page 91.
FRITZ!Box Fon WLAN 7570 vDSL 30
Internet Connections
5 Internet Connections
Setting Up the Internet Connection
In order to allow Internet access with the FRITZ!Box, you must first config-
ure the Internet connection in the FRITZ!Box user interface.
The FRITZ!Box can be operated directly at the DSL or VDSL line. Alterna-
tively, it can be connected to a cable modem, a DSL or VDSL modem, or a
DSL router, or integrated into an existing network.
5.1 Configuring the Internet Connection Using the Wizard
If the FRITZ!Box is connected directly to the DSL/VDSL line,
the account information from your Internet Service Provider
is required to configure the Internet connection in the
FRITZ!Box.
Use the Wizard to configure the Internet connection:
1. Open the FRITZ!Box user interface.
2. In the “Settings” area, please select the “Wizards”
menu.
3. Click the “Configure Internet Connection” Wizard and
follow the instructions.
Once configuration has been completed, all of the comput-
ers connected with the FRITZ!Box can be used to surf the In-
ternet without any further settings required.
5.2 Configuring the Internet Connection Manually
Changes to the Internet connection settings can be made in
the FRITZ!Box user interface.
Proceed as follows:
1. Open the FRITZ!Box user interface.
2. Select the “Advanced Settings” menu in the “Set-
tings” area.
3. Select “Internet / Account Information.
4. Configure the desired settings. Take advantage of the
Online Help available in the FRITZ!Box user interface
for more information and instructions.
Configuring the Internet Connection Manually
FRITZ!Box Fon WLAN 7570 vDSL 31
5. As a final step, click “Apply”.
If the FRITZ!Box is connected to a cable modem, a DSL or
VDSL modem or a router, or integrated into an existing net-
work, you must also configure your Internet connection as
described above. To do so, enable the expert mode in the
“System / Expert Mode” menu.
FRITZ!Box Fon WLAN 7570 vDSL 32
The DECT Function
6The DECT Function
Cordless Telephony with FRITZ!Box
Thanks to the integrated DECT function, the FRITZ!Box Fon WLAN 7570
vDSL can be used as a basis station for cordless phones. Every cordless
phone (also known as a DECT telephone) that supports the DECT-GAP
standard can be registered at the FRITZ!Box. A total of up to six cordless
phones can be registered.
6.1 Registering Cordless Phones
See the documentation of your cordless phone to find out
whether it supports the DECT-GAP standard: only phones
that support this standard can take advantage of the full
range of FRITZ!Box features.
To register a cordless phone on the FRITZ!Box, please follow
the corresponding instructions in your telephone manual.
Press and hold down the search key on the FRITZ!Box la-
beled “DECT” during the entire registration process. This
facilitates telephone registration.
Making an Internal Call to a Cordless Phone
FRITZ!Box Fon WLAN 7570 vDSL 33
6.2 Making an Internal Call to a Cordless Phone
A cordless phone can also be called from another regis-
tered handset. To do so, proceed as follows:
1. Pick up the handset of a telephone connected to the
FRITZ!Box.
2. Enter the keypad sequence corresponding to the cord-
less phone to be called.
The keypad sequence is determined by the position at
which the telephone is registered in the list of cordless
phones in the FRITZ!Box user interface:
6.3 Logging a Cordless Phone off of the FRITZ!Box
1. Start a web browser.
2. Open the FRITZ!Box user interface by entering fritz.box
in the address field.
3. In the “Start Menu” area, select the “Telephony De-
vices” menu.
4. In the “Cordless Phones (DECT)” area, select the cord-
less phone you want to log off and click the “Delete”
button.
Now the cordless phone will be logged off.
Position in the List of Cordless
Phones
Keypad Sequence
Entry 1 ss610
Entry 2 ss611
Entry 3 ss612
Entry 4 ss613
Entry 5 ss614
FRITZ!Box Fon WLAN 7570 vDSL 34
Switching the DECT Function On and Off
6.4 Switching the DECT Function On and Off
The DECT function is switched off upon delivery of the
FRITZ!Box.
Switching on the DECT function
The DECT function is switched on when the first cord-
less phone is registered.
Switching off the DECT function
When the last cordless phone is logged off in the
FRITZ!Box user interface, the DECT function is switched
off automatically.
Telephone Connections
FRITZ!Box Fon WLAN 7570 vDSL 35
7 Telephone Connections
Configuring FRITZ!Box for Telephony
Using the FRITZ!Box you can make telephone calls via the Internet and
the fixed-line network.
Once you have connected the FRITZ!Box as described in the chapter
“Connecting” from page 13, you can configure the FRITZ!Box for making
telephone calls.
The configuration is performed in two consecutive steps:
entering your phone numbers
configuring the connected telephony equipment
7.1 Entering Your Phone Numbers
The “Enter Your Phone Numbers” Wizard assists you in per-
forming the following tasks:
entering Internet phone numbers
entering fixed-line numbers
changing numbers already entered
deleting entered numbers
In the “Settings” area of the FRITZ!Box user interface there
are Wizards for the configuration of your FRITZ!Box. We rec-
ommend using these step-by-step instructions.
If you used the Basic Configuration Wizard after connecting
your FRITZ!Box and entered numbers then, these numbers
are already entered in your FRITZ!Box. In this case you can
start right away with the configuration of the connected te-
lephony devices.
FRITZ!Box Fon WLAN 7570 vDSL 36
Internet Telephone Number
Internet Telephone Number
In order to be able to make calls via the Internet with the
FRITZ!Box, you will need an Internet telephone number
from an Internet telephony provider.
You can enter multiple Internet numbers in the FRITZ!Box.
The Internet numbers can be from one or from multiple dif-
ferent Internet telephony providers.
Fixed-line Number
With the FRITZ!Box you can make calls both via the analog
fixed-line network and via the ISDN fixed-line network:
In order to make calls via the analog fixed-line network
with the FRITZ!Box, enter your telephone number in
the FRITZ!Box.
In order to make calls via the ISDN fixed-line network
with the FRITZ!Box, enter your ISDN numbers in the
FRITZ!Box.
7.2 Configuring Telephony Equipment
For the configuration of telephony equipment, the “Config-
ure Telephony Devices” Wizard is available in the
FRITZ!Box.
Telephony Devices Supported
The following telephony devices are supported by the
FRITZ!Box:
telephones
analog telephones
ISDN telephones
telephones with an integrated answering machine
cordless (DECT) phones
Settings for Telephony Devices
FRITZ!Box Fon WLAN 7570 vDSL 37
answering machines
If you have connected an analog answering machine
(to “FON 1” or “FON 2”, for instance), configure it as an
answering machine.
The FRITZ!Box is also equipped with integrated an-
swering machines, which can be enabled and config-
ured in the “Settings / Advanced Settings / Telephony
/ Answering Machines” menu.
ISDN telephone systems (PBXs)
ISDN PBXs for analog telephones
ISDN PBXs for ISDN telephones
fax machines
analog fax machines
ISDN fax machines
fax-telephone combinations
Settings for Telephony Devices
The “Configure Telephony Devices” Wizard can assist you in
configuring the following settings for telephony equipment
in the FRITZ!Box:
telephone
kind of connection used to connect the telephone
with the FRITZ!Box
internal name for the telephone
number used to conduct outgoing calls: With this
entry you specify whether outgoing calls should be
conducted via the Internet or the fixed-line net-
work.
call acceptance: Specify here whether the tele-
phone should react to all calls or only to calls for
certain telephone numbers.
FRITZ!Box Fon WLAN 7570 vDSL 38
Functions and Settings for Telephony
fax machine
kind of connection used to connect the fax machi-
ne with the FRITZ!Box
internal name for the fax machine
number used to send faxes: This entry defines
whether outgoing faxes are sent via the Internet or
the fixed-line network.
call acceptance: Here you define the numbers to
which the fax machine should react.
answering machine
kind of connection used to connect the answering
machine with the FRITZ!Box
internal name for the answering machine
call acceptance: Enter here whether the answering
machine should react to all calls or only to calls for
certain numbers.
ISDN PBX
The Wizard explains step by step how to prepare the
ISDN telephone system for operation at the FRITZ!Box.
7.3 Functions and Settings for Telephony
More functions and settings options for telephony are
available in the “Settings / Advanced Settings / Telephony”
menu.
Call List
The Call List displays outgoing calls and sent faxes, incom-
ing calls and faxes, as well as incoming calls in absence.
If the number of a caller or someone called is entered in the
Telephone Book, the Call List will display the name from the
Telephone Book.
The Call List can be saved as a file.
Telephone Book
FRITZ!Box Fon WLAN 7570 vDSL 39
Telephone Book
A Telephone Book is at your disposal in the FRITZ!Box.
If an AVM handset is registered at the FRITZ!Box, the Tele-
phone Book can be transferred to the handset.
Call Diversion
With this function you can divert incoming calls to another
number. The following kinds of call diversion are available:
diversion of all incoming calls to a certain telephone
number
diversion of calls for certain numbers
diversion of calls to other telephones connected with
the FRITZ!Box
diversion of calls that come from a certain telephone
number
Blocking Calls
The telephone number block of the FRITZ!Box offers you the
following options:
blocking numbers and ranges of numbers for outgoing
calls
From the FRITZ!Box no outgoing calls to a blocked
number range are possible. In this manner you can
block connections to certain mobile networks, for in-
stance.
blocking telephone numbers for incoming calls
For incoming calls you can block certain numbers to
avoid receiving calls from unwanted callers.
FRITZ!Box Fon WLAN 7570 vDSL 40
Alarm
Alarm
With this function you can use the telephones connected to
the FRITZ!Box as alarm clocks.
You can specify several different times for the alarm to
go off.
An individual telephone can be selected for the alarm
function.
Dialing Rules
Dialing rules specify when calls are conducted on the fixed-
line network, and when they take place over the Internet.
All connections to number ranges for which a dialing rule
has been defined are established using the specified con-
nection type.
Answering Machines
The FRITZ!Box is equipped with several integrated answer-
ing machines, each of which can be enabled and config-
ured individually.
By enabling the setting “Send messages by e-mail” you can
have recorded messages sent to you by e-mail. The mes-
sages are sent as audio files.
To check an answering machine internally, enter the follow-
ing keypad sequences:
Answering machine 1 ss600
Answering machine 2 ss601
Answering machine 3 ss602
Answering machine 4 ss603
etc. etc.
The Answering Machine Menu
FRITZ!Box Fon WLAN 7570 vDSL 41
7.4 The Answering Machine Menu
Main menu
1 Play back messages
If no messages have been recorded, you hear two short audio signals and return
to the main menu.
1 Pause / Play
5 Delete message
7 To previous message
9 To next message
0 Listen to “Play back messages” menu again
r Back to main menu
2 Delete old messages
52 Delete all old messages
0 Listen to “Delete messages” menu again
r Back to main menu
3 Switching the answering machine on / off
4 Switching the answering and recording mode on / off
5 Record greetings
1 Record greeting and message greeting
2 Record announcement
3 Closing message
Recording and selection
1 Listen to all recordings
2 Select a greeting during monitoring
8 Record greeting > End with 1
0 Listen to “Recording and selection” menu again
r Back to Main menu
0 Listen to “Record greetings” menu again
r Back to main menu
0 Listen to main menu again
FRITZ!Box Fon WLAN 7570 vDSL 42
USB Devices
8USB Devices
USB Devices at the FRITZ!BoxUSB
The FRITZ!Box is equipped with a USB port (also known as a USB host
controller). Various USB devices can be connected to the host controller:
an AVM FRITZ!WLAN USB Stick N or an AVM FRITZ!WLAN USB Stick
a USB mass storage device (hard drive, memory stick)
a printer
a USB hub
You can connect two USB mass storage devices and one USB print-
er, or three USB mass storage devices to the USB hub.
The USB port of the FRITZ!Box supports the USB 1.1 and USB 2.0 stan-
dards.
8.1 Connecting USB Devices
Connecting a USB cable to the USB port
Connection Some USB devices, such as memory sticks or the
FRITZ!WLAN USB Stick N, are inserted directly into the USB
port on the FRITZ!Box. Other devices like USB printers are
connected to the USB port by means of a USB cable.
Accessing USB Devices
FRITZ!Box Fon WLAN 7570 vDSL 43
8.2 Accessing USB Devices
Network Access As soon as a USB device is connected to the FRITZ!Box, all
of its functions are available in the entire network:
The files in the USB mass storage can be accessed
from the network via FTP (File Transfer Protocol), or you
can make the USB mass storage device available as a
network storage device.
USB printers are available as network printers.
USB Remote
Connection
With the USB remote connection, a computer in the net-
work can use USB devices just as if they were connected di-
rectly to the computer via the USB cable.
The USB remote connection is enabled for each USB device
class individually (USB printer, USB storage and other USB
devices).
8.3 FRITZ!Box USB Remote Connection
With the FRITZ!Box USB remote connection you can control
connections between your computer and USB devices. The
computer and the USB devices are all connected with the
FRITZ!Box.
A USB device connected to the FRITZ!Box is handed over to
a computer via the USB remote connection function. The
USB device is detected as new hardware by the operating
system on this computer, so that device software can be in-
stalled as if it were connected directly to the computer. The
While a computer accesses a USB device via the USB re-
mote connection, the USB device is not available for other
computers in the network.
The USB remote connection can be used in Windows Vista
(32-bit) and Windows XP (32-bit) with Service Pack 2 or
higher.
FRITZ!Box Fon WLAN 7570 vDSL 44
Enabling the USB Remote Connection
USB remote connection can be enabled for various USB de-
vices, such as USB mass storage devices, printers and
scanners.
With the FRITZ!Box USB remote connection you can enjoy
the full range of functions of your USB devices.
USB storage devices can also be used with special file
formats like NTFS.
All-in-one printers can also be used for scanning and
faxing.
Enabling the USB Remote Connection
Work through the following steps in order to enable the
USB remote connection on your computer:
1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings” menu in the “Set-
tings” area.
4. Enable the expert mode option of the FRITZ!Box in the
“System / Expert Mode” menu. Confirm by clicking
“Apply”.
5. Open the “USB Devices / Overview of Devices” menu.
6. Select the setting “Enable USB remote connection”
and click “Apply”.
Please note that the FTP and USB network memory func-
tions are not available as long as the USB remote connec-
tion is active for USB storage devices.
Isochronal USB devices with time-critical data transmis-
sion (like, for instance sound cards, web cams, video con-
verters or TV adapters) are not supported.
Disabling the USB Remote Connection
FRITZ!Box Fon WLAN 7570 vDSL 45
7. Open the “USB Remote Connection” menu and install
the program for the USB remote connection on the
computer from which you want to use the USB de-
vices. Follow the instructions on the “USB Remote
Connection” page.
The program can be implemented in Windows Vista
(32-bit) and Windows XP (32-bit) with Service Pack 2
or higher.
8. The next step is to specify for which kind of USB de-
vices the USB remote connection should be enabled.
Enable the desired options.
9. As a final step, click “Apply”. All USB devices con-
nected to the FRITZ!Box will be detected again.
The result of the changed USB settings can be viewed in the
“Overview of Devices”.
Disabling the USB Remote Connection
Perform the following steps to disable the USB remote con-
nection:
1. Open a web browser on the computer for which the
USB remote connection is to be disabled.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings” menu in the “Set-
tings” area.
4. Enable the expert mode option of the FRITZ!Box in the
“System / Expert Mode” menu. Confirm by clicking
“Apply”.
5. Open the “USB Devices / USB Remote Connection”
menu.
6. Disable all types of USB devices.
7. As a final step, click “Apply”.
The result of the changed USB settings can be viewed in the
“Overview of Devices”.
FRITZ!Box Fon WLAN 7570 vDSL 46
USB Mass Storage Devices
8.4 USB Mass Storage Devices
USB mass storage devices include hard drives and memory
sticks.
File Systems The USB mass storage supports the file systems FAT, FAT32
and NTFS.
Connecting A USB storage device can be connected either directly to
the USB port or via the USB hub (see the section “USB
Hub” on page 55).
Please also see the “Tips for Using USB Devices” on
page 56.
Access Rights and Password Protection
Access Rights and
Password
Protection
On the FRITZ!Box user interface you can configure access
rights and password protection for the USB storage de-
vices.
1. Start a web browser.
2. Enter fritz.box
in the address field.
3. Select the “Advanced Settings” menu in the “Set-
tings” area.
4. Select the “USB Devices / Mass Storage Devices”
menu.
5. Configure the access rights and password protection
for the USB mass storage devices.
The access rights and password protection are valid for all
USB mass storage devices. It is not possible to assign a dif-
ferent password for each individual mass storage device.
The access rights and password protection are not enabled
if the USB remote connection is enabled for all USB mass
storage devices.
Accessing the Data in the USB Mass Storage Devices
FRITZ!Box Fon WLAN 7570 vDSL 47
Accessing the Data in the USB Mass Storage Devices
USB storage devices connected to the FRITZ!Box directly or
via a USB hub are displayed with their device name in the
USB Devices / Overview of Devices menu on the user in-
terface.
FTP (File Transfer
Protocol)
All of the computers in the network can access the data in
the USB mass storage simultaneously via FTP.
Click the name of the USB storage device in the “USB Devic-
es / Overview of Devices” menu or open a web browser and
enter FTP://fritz.box
in the address field. The folder struc-
ture of the USB storage device is displayed in the web
browser.
The data in the USB storage device can be accessed via FTP
using any FTP client.
Files from the USB storage device cannot be executed or
opened in a suitable program until they have been copied
to your computer or your local network.
USB Network
Memory
The FRITZ!Box offers you the possibility of making USB
mass storage devices available in the Windows network as
network drives (Samba). Files in the USB memory then can
be opened and processed directly on the USB mass storage
device.
Files are supported up to a size of 4 GB.
FRITZ!Musikbox With this feature music files on the USB storage device can
be played back by compatible devices (streaming). The
hard drive with the music collection is simply connected to
the USB port of the FRITZ!Box and a suitable playback de-
vice is integrated into the local network.
Access via FTP is possible only if the USB remote connec-
tion is disabled for USB storage devices.
Access to USB network memory is only possible if the USB
remote connection is disabled for USB storage devices.
FRITZ!Box Fon WLAN 7570 vDSL 48
USB Printers
The devices automatically communicate via Universal Plug
and Play (UPnP). This technology allows the devices con-
nected to each other by cable or radio network to perform
automatic detection, recognize events, and exchange data
with each other accordingly. With UPnP AV this technology
has been expanded to audio and video contents.
The FRITZ!Musikbox makes files available in the MP3, WMA
or WAV format.
8.5 USB Printers
You can connect a USB printer to the USB port and either
enable the USB remote connection, or use the USB printer
as a network printer.
If you enable the USB remote connection for USB printers,
then you can use the printer on another computer just as if
it were connected directly to your computer.
When configured as a network printer, the USB printer can
be used simultaneously by all of the computers connected
to the FRITZ!Box.
If you would like to connect a USB printer, please note the
following:
Only printers that can be addressed with the device
class “Printer” are supported as network printers. This
is not the case for some all-in-one printers, for in-
stance combined fax-scanner-printers.
Host-based printers that work according to the GDI
system, for instance, and require bidirectional com-
munication for status messages, can only be used via
the USB remote connection. These printers usually
can be used only with an operating system for which
the printer manufacturer has provided driver software.
Such printers connected to the FRITZ!Box are not sup-
ported as network printers.
USB Printers
FRITZ!Box Fon WLAN 7570 vDSL 49
When the USB remote connection is enabled, all-in-
one printers (printers with supplementary fax or scan-
ner functions) can also be used for faxing and scan-
ning.
If the USB printer is operated as a network printer, on-
ly the printing function is supported.
If your printer is equipped with a status monitor, you
can use this feature when the USB remote connection
is enabled.
If the printer is used as a network printer, it may not be
possible to utilize the status monitor.
For computers with Linux:
The printer must be supported by CUPS (Common
UNIX Printing System) software and be detected cor-
rectly at the USB port of the FRITZ!Box.
For Apple computers:
The only printers that can be used are the ones whose
drivers can be selected in the “Printer” utility or for
which a compatible driver is available there.
If you want to use the printer as a network printer, the print-
er port must be configured, and the suitable printer drivers
installed, on every computer. Print jobs are forwarded to
the IP address of the printer server in the local network via
the printer port.
If you want to use the printer with the USB remote connec-
tion enabled, then any computer that is to use the printer
must have the program for the USB remote connection (see
page 44) and the suitable printer drivers installed.
FRITZ!Box Fon WLAN 7570 vDSL 50
Configuring the Printer Port in the Windows Operating Systems
Configuring the Printer Port in the Windows Operating
Systems
If the “FRITZ!Box” entry is already listed in the “Programs”
group of the start menu of the computer, this means that
the printer port is already configured on this computer.
Otherwise, work through the following steps to configure
the printer port:
1. Insert the FRITZ!Box CD in your CD-ROM drive.
The installation Help is started.
2. Click the “View CD Contents” button.
3. Click the “Start Menu Entry” button.
The printer port designated “AVM: (FRITZ!Box USB
Printer Port)” will be configured.
Now you can install the printer driver of the printer connect-
ed to FRITZ!Box for this printer port.
Installing Printer Drivers in Windows Vista
1. Click the “Start” button in the task bar and select the
“Control Panel”.
2. Select “Printers”.
3. Click “Add Printer”.
4. Select “Add a local printer”.
You must make this selection because the printer port
on the computer functions as a local port.
5. Select the setting “Use an existing port” and then
choose the entry “AVM: (FRITZ!Box USB Printer Port)”
from the list. Click “Next”.
6. Select the manufacturer for the USB printer connected
to the FRITZ!Box from the “Manufacturers” list and
then select the exact model from the “Printers list.
If the manufacturer or the model is not included in the
lists, use an installation disk or CD with the required
files and click “Have Disk...”.
Installing Print Drivers in Windows XP/2000
FRITZ!Box Fon WLAN 7570 vDSL 51
7. You can enter a name for the printer in the “Printer
Name” field. The operating system will use this name
to administer the printer.
8. Conclude the installation by clicking “Finish”.
Installing Print Drivers in Windows XP/2000
1. Open the start menu of the computer and click the
“Printers and Faxes” entry (Windows XP) or click “Start
/ Settings / Printer” (Windows 2000).
2. In the “Printers and Faxes” window, click “Add a print-
er in the “Printer Tasks” area on the left hand side.
The “Add Printer” Wizard will be started.
3. Click “Next”.
4. Select the option “Local printer attached to this com-
puter” (Windows XP) or “Local Printer”
(Windows 2000) and make sure that the setting “Au-
tomatically detect and install my Plug and Play print-
er” is disabled.
You must make this selection because the printer port
on the computer functions as a local port.
5. Click “Next”.
6. In the “Select a Printer Port” window, select the option
“Use the following portand select “AVM: (FRITZ!Box
USB Printer Port)” from the list field. Click “Next.
7. Select the manufacturer for the USB printer connected
to the FRITZ!Box from the “Manufacturers” list and
then select the exact model from the “Printers list.
If the manufacturer or the model is not included in the
lists, use an installation disk or CD with the required
files and click “Have Disk...”.
8. In the “Name Your Printer” window, answer the ques-
tion “Do you want to use this printer as the default
printer?” (Windows XP) or “Do you want your Win-
dows-based programs to use this printer as the de-
fault printer?” (Windows 2000) with “No”.
FRITZ!Box Fon WLAN 7570 vDSL 52
Setting Up Printers in SUSE Linux Systems
Setting Up Printers in SUSE Linux Systems
A USB printer can be connected to the USB port of the
FRITZ!Box for use as a network printer. The printer is then
available to all computers connected with the FRITZ!Box.
Install the printer as “root” or “superuser”.
1. Open a console and enter the following command:
lpadmin -p <printer_name> -E -v socket://<IP_address_
of_the_FRITZ!Box>:<port_number> -m <printer_
description_file.ppd>
2. For more information and instructions, go to the fol-
lowing web site:
http://www.cups.org/man/lpadmin.html
Example For a laser jet printer with the example name of Laserjet4
and the PPD file laserjet.ppd at a FRITZ!Box with the default
address 192.168.178.1, on the console you must enter:
lpadmin -p Laserjet4 -E -v socket://192.168.178.1:9100 -m
laserjet.ppd
You can view the PPD files installed in the system with the
following command:
lpinfo -m
For More
Information
Please direct any questions about PPD files to the manufac-
turer of the printer or system used. More detailed informa-
tion on the CUPS printing software is included in the follow-
ing documentation:
http://www.cups.org/documentation.php
Configuration questions should also be directed to the
manufacturer of the Linux distribution or to an Internet or
usenet forum that deals with CUPS or the distribution used.
Setting Up USB Printers on Apple Computers
FRITZ!Box Fon WLAN 7570 vDSL 53
Setting Up USB Printers on Apple Computers
A USB printer can be connected to the USB port of the
FRITZ!Box for use as a network printer. The printer is then
available to all computers connected with the FRITZ!Box.
1. Under “Go / Utilities”, open the “Printer Setup Utility”.
2. Click “Add”.
3. Select “IP Printer”.
4. In the “Protocol” field, select the entry “HP Jet Direct –
Socket”.
5. Enter in the “Address” field the IP address of the
FRITZ!Box:
192.168.178.1
6. Leave the “Queue:” field empty.
7. Enter the desired values in the “Name:” and “Loca-
tion:” fields.
8. Select a driver compatible with your printer in the
“Print Using:” field.
9. Click the “Add” button to save your settings.
The printer is then available to all computers connected wi-
th the FRITZ!Box.
If the printer cannot be selected, it may be possible to
select a compatible printer or printer driver.
FRITZ!Box Fon WLAN 7570 vDSL 54
FRITZ!WLAN USB Stick N and FRITZ!WLAN USB Stick
Information about compatible printers or printer drivers is
available in the Internet, for instance on the following page:
http://gutenprint.sourceforge.net/p_Supported_
Printers.php3
8.6 FRITZ!WLAN USB Stick N and FRITZ!WLAN USB Stick
The FRITZ!WLAN USB Stick N and the FRITZ!WLAN USB Stick
are WLAN adapters manufactured by AVM for connection to
a computer. Using a WLAN adapter you can connect the
computer wirelessly with the FRITZ!Box.
FRITZ!WLAN USB
Stick N
The FRITZ!WLAN USB Stick N supports all WLAN features of
your FRITZ!Box.
the WLAN standards IEEE 802.11 n+g+b in the 2.4-GHz
frequency band, and alternatively
the WLAN standards IEEE 802.11 n+a in the 5-GHz fre-
quency band.
For more information, see the section “More about WLAN”
from page 120 and the manual for the FRITZ!WLAN USB
Stick N.
FRITZ!WLAN USB
Stick
If you are using the FRITZ!WLAN USB Stick with your
FRITZ!Box, the WLAN standards IEEE 802.11g+b are sup-
ported in the 2.4-GHz frequency band.
For more information, see the section “More about WLAN”
from page 120 and the manual for the FRITZ!WLAN USB
Stick.
AVM Stick & Surf With the AVM Stick & Surf technology it is easy to establish
a secure WLAN connection. Stick & Surf is possible with the
FRITZ!WLAN USB Stick N and with the FRITZ!WLAN USB
Stick.
USB Hub
FRITZ!Box Fon WLAN 7570 vDSL 55
1. Insert the your stick into the USB port on the
FRITZ!Box.
The WLAN security settings are transmitted automati-
cally to the FRITZ!WLAN USB Stick. The “INFO” LED on
the FRITZ!Box begins flashing rapidly.
As soon as the “INFO” LED stops flashing, transmis-
sion of the settings has been concluded.
2. Remove the FRITZ!WLAN USB Stick from the device.
3. After the security settings have been transmitted auto-
matically, you can insert the FRITZ!WLAN USB Stick in
a computer.
Now the FRITZ!WLAN USB Stick is ready to establish a con-
nection to the FRITZ!Box. No further settings are necessary.
8.7 USB Hub
A USB hub can be connected to the USB host controller. A
USB hub is a device to extend existing USB ports.
You can connect two USB mass storage devices and one
USB printer, or three USB mass storage devices (like a hard
drive or memory stick) to the USB hub.
We strongly advise to use a USB hub with its own power
supply.
FRITZ!Box Fon WLAN 7570 vDSL 56
Tips for Using USB Devices
8.8 Tips for Using USB Devices
USB Devices When using USB devices at the USB port of the FRITZ!Box,
please keep in mind the following;
If more than one USB device without its own power
supply is connected to the FRITZ!Box, note that, in ac-
cordance with the USB specification, the total current
consumption may not exceed a value of 500 mA. Oth-
erwise unspecified malfunctions with the USB devices
or even damage to the FRITZ!Box may occur.
AVM expressly advises against installing firmware up-
dates for USB devices connected to the computer via
the USB remote connection on the FRITZ!Box.
USB Mass Storage
Devices
When using a USB storage device at the USB port of the
FRITZ!Box, please keep in mind the following:
Before removing the USB storage device, select the
“Remove Safely” button in the FRITZ!Box user inter-
face to prevent losses of data.
To avoid damage to the FRITZ!Box or the USB storage
device, operate USB storage devices that require more
than one USB port for operation (for instance hard
drives with a Y cable) only if they have their own power
supply or a USB hub with its own power supply.
AVM has no influence over external interference to the
USB storage devices on the FRITZ!Box. Thus such phe-
nomena as voltage spikes during storms may occur,
and writing to older USB memory devices may corrupt
the data structure due to a high number of defective
structures. In such cases a complete loss of data may
occur.
Therefore AVM recommends always making a security
copy of the USB memory content so that your data are
not irretrievably lost.
Configuration and Operation at the Telephone
FRITZ!Box Fon WLAN 7570 vDSL 57
9 Configuration and Operation at the Telephone
FRITZ!Box Keypad Sequences
Many of the FRITZ!Box functions and features can be config-
ured and used over a telephone connected to a FRITZ!Box
extension. Only tone-dialing (dual-tone multifrequency =
DTMF) telephones can be used in configuration and opera-
tion. Pulse dialing telephones are not suitable.
Acknowledgment
Tone
Entries input on the telephone are confirmed with acknowl-
edgement tones (see also “Handset and Ring Patterns” on
page 113):
Entries made correctly are confirmed with a positive
acknowledgement tone (a single tone of one second
in length).
If the entry was not successful, because of an incor-
rect key sequence, for instance, you hear a negative
acknowledgment tone (an intermittent tone broken in-
to intervals of about 0.25 seconds).
9.1 Configuring at the Telephone
Saving New Settings
In this section, saving refers to all current settings made in
the FRITZ!Box. It is not necessary to save the configuration
immediately after every change. You may first configure all
of your settings as desired, and then save them permanent-
ly.
The telephone network features can be used only if they
are supported by your telephone network carrier and en-
abled on your telephone line.
Permanent saving cannot be reversed. However, you can
reprogram different settings or restore the FRITZ!Box to its
factory settings.
FRITZ!Box Fon WLAN 7570 vDSL 58
Restoring Factory Settings
Restoring Factory Settings
The FRITZ!Box can be reset to its condition upon delivery by
restoring factory settings.
After restoring factory settings, the FRITZ!Box is restarted.
Enabling/Disabling WLAN
The WLAN function can be switched on and off using the
telephone keypad. This is especially comfortable when the
WLAN function has been switched off. Simply use your tele-
phone to turn it back on. This means that the WLAN func-
tion can be enabled without having use a wired connection
to open the user interface.
Save Permanently
N Pick up the handset.
r91ss Save all settings permanently by dialing the
sequence shown at left.
O Hang up the handset.
All settings you made in the FRITZ!Box—including the con-
figured Internet connection—are deleted when the factory
settings are restored.
Restore Factory Settings
r991s159
01590s
resets the FRITZ!Box to its condition upon
delivery
Enable/Disable WLAN
r96s1s enables the WLAN function
r96s0s disables the WLAN function
Do Not Disturb
FRITZ!Box Fon WLAN 7570 vDSL 59
Do Not Disturb
You can enable the Do Not Disturb function for any tele-
phone connected to FRITZ!Box in the user interface. When
Do Not Disturb is enabled, the telephone will not ring. In
configuring this function you can choose between enabling
the function immediately and selecting a specific time peri-
od.
Immediately When Do Not Disturb is enabled immediately, no incoming
calls will be signaled at the specified extension. The Do Not
Disturb setting will remain enabled until it is disabled.
Period Alternatively, you can enter a Do Not Disturb period during
which the telephone will not ring. At the extension for
which a Do Not Disturb period is to be configured, define
the period during which the phone should not ring and
save your entries. Then enable Do Not Disturb. Do Not Dis-
turb then automatically will be switched on daily at the time
entered in the “Start field and switched off again at the
time defined in the “End” field.
Example: Do Not Disturb should be configured from
08:00 p.m. until 07:00 a.m. daily. Enter the value “2000”
for <Start> and “0700” for <End>.
Disabling the
Function
Both kinds of Do Not Disturb settings can be disabled by
means of a keypad sequence.
Enable Do Not Disturb Effective Immediately
r81<Ext.>s0s immediately enables Do Not Disturb for
the extension entered as <Ext.>
Enable Do Not Disturb for a Prescribed Period
r80<Ext.>s
<Start>s<End>s
defines the period for Do Not Disturb at
extension <Ext.>
r91ss saves the settings
r81<Ext.>s6s enables Do Not Disturb for the defined pe-
riod
FRITZ!Box Fon WLAN 7570 vDSL 60
Alarm
Alarm
The FRITZ!Box includes an alarm function. The alarm can be
configured individually for each connected telephone.
First enter on the telephone the time at which you would
like to be awakened and save this entry. Then enable the
alarm function.
Example: The telephone should ring to wake you at
07:00 a.m. Enter the value “0700” as the <Time> and save
this setting.
Disable Do Not Disturb
r81<Ext.>s6s disables Do Not Disturb for extension
<Ext.>
Configure the Alarm for a Telephone
r881s<Time>s
<Ext.>s
defines for the extension <Ext.> the
time at which the telephone should
ring
r91ss saves the settings
Enable/Disable the Alarm Function
r881ss enables the alarm function for all ex-
tensions for which an alarm time was
set
r881r disables the alarm function for all ex-
tensions
Call Diversion on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 61
Call Diversion on the ISDN Line
Call forwarding is performed by the ISDN operator’s switch-
ing station. To use call forwarding, FRITZ!Box must be con-
nected to an ISDN line. Then this feature can be used to for-
ward calls to an external line. Call forwarding is subject to
charges by the network provider and cannot be used to for-
ward calls to Internet numbers.
In addition to call forwarding, there is also call diversion via
the FRITZ!Box. Use this kind of call diversion to divert calls
to internal and external lines. See the section “Call Diver-
sion” on page 67 for more information.
For call forwarding you may specify whether you want in-
coming calls to be forwarded unconditionally, after the fifth
ring, or when busy. Different settings may be configured
separately for each number.
Call Forwarding
Immediately
Incoming calls for the given MSN are always diverted imme-
diately to the specified number. Call forwarding is subject
to charges by the network provider and cannot be used for
forwarding calls to Internet numbers.
Do not activate both call forwarding and call diversion at
the same time.
Call Forwarding Immediately for Your Outgoing Caller ID
N Pick up the handset.
s21s<DNo>r Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 62
Call Diversion on the ISDN Line
Call Forwarding Immediately for Any MSN
N Pick up the handset.
s21s<DNo>
s<MSN>r
Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Call Forwarding Immediately for All MSNs
N Pick up the handset.
s21s<DNo>sr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Disable Call Forwarding Immediately for Your Outgoing Caller ID
N Pick up the handset.
s21sr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Disable Call Forwarding Immediately for Any MSN
N Pick up the handset.
s21ss<MSN>r Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Call Diversion on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 63
Call Forwarding
When Busy
Incoming calls are forwarded to the specified number only
if a call is already being conducted using the number
dialed. You can define call diversion for the local outgoing
call number. The local outgoing call number is the first
number you assigned to an extension. You can also define
call diversion for any other number, e.g. a telephone at an-
other extension, or for all numbers. All settings can be dis-
abled at any time.
Disable Call Forwarding Immediately for All MSNs
N Pick up the handset.
s21ssr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Call Forwarding When Busy for Your Outgoing Caller ID
N Pick up the handset.
s67s<DNo>r Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Call Forwarding When Busy for Any MSN
N Pick up the handset.
s67s<DNo>
s<MSN>r
Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 64
Call Diversion on the ISDN Line
Call Forwarding When Busy for All MSNs
N Pick up the handset.
s67s<DNo>sr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Disable Call Forwarding When Busy for Your Outgoing Caller ID
N Pick up the handset.
s67sr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Disable Call Forwarding When Busy for Any MSN
N Pick up the handset.
s67ss<MSN>r Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Disable Call Forwarding When Busy for All MSNs
N Pick up the handset.
s67ssr Dial the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
Call Diversion on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 65
Call Forwarding
Delayed
Incoming calls are forwarded to the specified number if not
answered at the number originally dialed within
20 seconds (about five rings). Call forwarding can be con-
figured for your extension’s outgoing caller ID (the first
number assigned to an extension), for any number (for in-
stance, a telephone at the other FRITZ!Box extension), or for
all numbers. All settings can be disabled at any time.
Call Forwarding Delayed for Your Outgoing Caller ID
N Pick up the handset.
s61s<DNo>r Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
Call Forwarding Delayed for Any MSN
N Pick up the handset.
s61s<DNo>
s<MSN>r
Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
Call Forwarding Delayed for All MSNs
N Pick up the handset.
s61s<DNo>sr Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 66
Call Diversion on the ISDN Line
Disable Call Forwarding Delayed for Your Outgoing Caller ID
N Pick up the handset.
s61sr Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
Disable Call Forwarding Delayed for Any MSN
N Pick up the handset.
s61ss<MSN>r Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
Disable Call Forwarding Delayed for All MSNs
N Pick up the handset.
s61ssr Dial the sequence shown at
left.
Q Wait for the acknowledgement
tone.
O Hang up the handset.
Call Diversion
FRITZ!Box Fon WLAN 7570 vDSL 67
Call Diversion
Incoming calls to the FRITZ!Box telephones can be diverted
to a different extension or to an external number. In con-
trast to call diversion over FRITZ!Box, there is also call for-
warding (call diversion via the central exchange). How to
use call forwarding by phone is described in the section
“Call Diversion on the ISDN Line” on page 61.
Call diversion allows you to forward calls to an external line
or to another extension. This kind of diversion is organized
inside FRITZ!Box so that diversions to another extension
are free of charge. Calls are diverted to an external number
over your ISDN line’s second B channel and are subject to
normal transmission charges. If the FRITZ!Box is operated
on an analog telephone line, incoming calls can only be di-
verted to a different extension or to numerical Internet
numbers.
You can specify the conditions under which an incoming
call will be diverted over FRITZ!Box. You can select one of
five different options. Different settings may be saved for
each extension.
Do not activate both call forwarding and call diversion at
the same time.
Note that only numerical Internet numbers can be entered
for diversion to an Internet number.
Call Diversion Immediately (Without Ringing)
N Pick up the handset.
r41<Ext.>s
<DNo>/<Ext.>s
Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 68
Call Diversion
Call Diversion After the Third Ring
N Pick up the handset.
r42<Ext.>s
<DNo>/<Ext.>s
Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
Call Diversion When Busy
N Pick up the handset.
r43<Ext.>s
<DNo>/<Ext.>s
Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
Call Diversion After the Third Ring or When Busy
N Pick up the handset.
r44<Ext.>s
<DNo>/<Ext.>s
Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
Call Diversion
FRITZ!Box Fon WLAN 7570 vDSL 69
Call Diversion Immediately by Ringing
N Pick up the handset.
r45<Ext.>s
<DNo>/<Ext.>s
Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
Disable Call Diversion
N Pick up the handset.
r40<Ext.>ss Dial the sequence shown at left.
r91ss Save your settings if desired by di-
aling the sequence shown at left.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 70
Call Waiting
Call Waiting
Call waiting can be switched on or off for each extension.
Some older terminal equipment connected to extensions
may misinterpret the call waiting signal. This is especially
true of fax machines and modems. If communication errors
occur, you should disable call waiting for fax and modem
extensions.
See section “Waiting Calls” on page 79 for information
about how to accept a call while another connection is ac-
tive.
When Call Waiting is enabled, modem and fax connections
may be interrupted.
Enable Call Waiting
N Pick up the handset.
r2 <Ext.> s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Disable Call Waiting
N Pick up the handset.
r2 <Ext.> s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Caller ID Suppression for Outgoing Calls (CLIR)
FRITZ!Box Fon WLAN 7570 vDSL 71
Caller ID Suppression for Outgoing Calls (CLIR)
The CLIR (Calling Line Identification Restriction) function
prevents your telephone number being displayed on the
other party’s phone during outgoing calls.
The CLIR function is disabled in the factory settings. You
have the option of enabling this function permanently and
then disabling it again. CLIR can also be used for individual
connections. When CLIR is permanently enabled, this set-
ting is saved for the extension and always enabled for out-
going connections.
If you would like to conduct only certain calls with the Caller
ID suppressed, prefix the number dialed with a keypad se-
quence. This enables CLIR only for the current connection.
Enable CLIR Permanently
N Pick up the handset.
r51<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Disable CLIR Permanently
N Pick up the handset.
r51<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
CLIR on a Case-by-Case Basis
N Pick up the handset.
s31r Dial the sequence shown at left. Now
you hear the external dial tone.
M Dial the number you want to call.
FRITZ!Box Fon WLAN 7570 vDSL 72
Displaying the Incoming Caller ID (CLIP)
Displaying the Incoming Caller ID (CLIP)
The CLIP (Calling Line Identification Presentation) function
makes the number of callers—external and internal—visible
on your telephone display.
The CLIP function is enabled in the factory settings. This
function can be permanently disabled and enabled again.
Connected ISDN Line Identification Restriction and
Presentation (COLR/COLP)
By default, a callers display always shows the Multiple
Subscriber Number (MSN) of the extension she or he
dialed. Yet if you take the call at another extension, the
MSN of this extension will be displayed (see page 78). If
you do not want the caller to know that the call has been
picked up at another extension and thus wish this number
to remain concealed, you have the option of suppressing
transmission of the connected line’s number. The caller’s
display will continue to show the number that was actually
dialed.
This feature is only effective if your telephone supports
CLIP.
Enable Display of Incoming Caller ID (CLIP)
N Pick up the handset.
r50<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Disable Display of Incoming Caller ID (CLIP)
N Pick up the handset.
r50<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing
the sequence shown at left.
O Hang up the handset.
Connected ISDN Line Identification Restriction and Presentation (COLR/COLP)
FRITZ!Box Fon WLAN 7570 vDSL 73
Transmission of the connected line’s number can be
switched on and off for each extension individually. Trans-
mission of the connected line’s number is permanently en-
abled in the factory settings.
Enable Connected Line Identification Restriction (COLR)
Permanently
N Pick up the handset.
r53<Ext.>s1s Dial the sequence shown at left to disable
transmission of the connected line’s num-
ber.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Enable Connected Line Identification Presentation (COLP)
Permanently
N Pick up the handset.
r53<Ext.>s0s Dial the sequence shown at left to enable
transmission of the connected line’s num-
ber.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 74
Disabling Automatic Outside Dialing
Disabling Automatic Outside Dialing
The offers the possibility of disabling automatic outside
dialing. This means that you will receive an internal dialing
tone when you lift the handset at the corresponding exten-
sion. This makes sense at any extension which is used to
make many internal calls, for instance, between the exten-
sions of the FRITZ!Box. When automatic outside dialing is
disabled, for an external call the 0 must be dialed before
the telephone number.
Disable Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Enable Automatic Outside Dialing
N Pick up the handset.
r1<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Call Rejection on Busy (Busy on Busy)
FRITZ!Box Fon WLAN 7570 vDSL 75
Call Rejection on Busy (Busy on Busy)
Calls for an extension can be rejected using the “Busy on
busy” feature. This means that the user receives a busy sig-
nal whenever the extension is busy.
9.2 Operation at the Telephone
This section describes how you can use the FRITZ!Box fea-
tures via your telephone keypad.
Shortening the Dialing Procedure
The FRITZ!Box automatically recognizes when a number has
been entered, but not until a few seconds after the final
digits are entered.
You have the possibility of shortening the dialing procedure
by closing your entry with the r key.
Enable Busy on Busy
N Pick up the handset.
r52<Ext.>s1s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Disable Busy on Busy
N Pick up the handset.
r52<Ext.>s0s Dial the sequence shown at left.
r91ss Save your settings if desired by dialing the
sequence shown at left.
O Hang up the handset.
Shorten the Dialing Procedure
<number> r indicates that a number has been dialed to
shorten the dialing procedure
FRITZ!Box Fon WLAN 7570 vDSL 76
Selecting the Outgoing Number and the Type of Connection
Selecting the Outgoing Number and the Type of
Connection
For outgoing connections you can specify the kind of con-
nection to be used for the next dialing procedure. For this
entry you can use settings already made, or circumvent the
settings currently configured. In this case the dialing rules
are suspended for the given dialing procedure.
By entering precisely which Internet telephony account
should be used it is possible to have the dialing procedure
conducted via a certain Internet number, even though this
number was never previously configured for the extension
used.
Making Internal Calls
All calls conducted between telephones connected to the
FRITZ!Box, be they analog or ISDN/DECT phones, are inter-
nal telephone calls. These calls are free of charge.
Select the Outgoing Number and the Type of Connection
s111r
<Phone number>
dials up this connection using the fixed-line
network
s12r
<Phone number>
dials up this connection using the first Inter-
net phone number
s12<P>r establishes an Internet telephony connection
via the specified Internet phone number. For
<P> enter the position of the Internet number
in the “List of Internet Numbers”.
Making Internal Calls
FRITZ!Box Fon WLAN 7570 vDSL 77
Dial Internal Calls with Automatic Outside Dialing
N Pick up the handset. You can hear the external
dial tone immediately, since the extension is
set for automatic outside dialing.
ss<Ext.> If you would like to make an internal call to
one of the extensions, dial ss, followed by
the number of the extension, for instance 1
or 2.
ss50 If you would like to call all ISDN terminal de-
vices for which no number has been config-
ured, then dial ss50.
ss<ISDN ID> If you would like to call an ISDN terminal de-
vice for which you have defined an internal
phone number, dial ss followed by the in-
ternal number of the device (for instance,
51).
ss5<MSN> If you would like to call an ISDN device that
does not have an internal phone number, dial
ss5, followed by the MSN that was saved
in the ISDN terminal device.
Dial Internal Calls without Automatic Outside Dialing
N Pick up the handset. You hear the internal dial
tone.
<Ext.> Dial the desired extension number, for in-
stance 1 or 2.
50 If you would like to call all ISDN terminal de-
vices for which no phone number has been
configured, dial 50.
<ISDN ID> If you would like to call an ISDN terminal de-
vice for which you defined an internal phone
number, dial the internal phone number of the
device (for instance, 51).
5<MSN> If you would like to call an ISDN terminal de-
vice that does not have an internal phone
number, dial 5, followed by the MSN that
was saved in the ISDN terminal device.
FRITZ!Box Fon WLAN 7570 vDSL 78
Group Call
Group Call
Place a group call to call all other extensions at the same
time. Your call is connected with whichever extension an-
swers first.
Picking up a Call from the Answering Machine
Use this function to pick up incoming calls on your tele-
phone that already have been taken by the answering ma-
chine.
Group Call
N Pick up the handset.
ss9 Dial the keypad sequences shown at left to call all
free extensions.
Pick up a Call
N Pick up the handset.
s09 Dial the sequence shown at left.
P The call is now connected to your extension and
you can talk to the caller.
Waiting Calls
FRITZ!Box Fon WLAN 7570 vDSL 79
Waiting Calls
When the “Call Waiting” feature is enabled and you are
conducting a call, you will be notified as soon as an exter-
nal call arrives on your line. This call will be signaled by an
acoustic signal in the handset. You can accept the connec-
tion with the new caller within 30 seconds. If you ignore the
signal, the waiting call is rejected after 30 seconds.
For instructions on how to turn the Call Waiting function on
and off, see the section “Call Waiting” on page 70.
Call Back on Busy (CCBS) on the ISDN Line
When you dial a number and it is busy, you can enable the
Call Back on Busy” feature. As soon as the line is free, your
telephone rings for 20 seconds, as it would for an external
call. When you pick up your handset, the number of desired
party will be dialed automatically.
“Call Back on Busy” can be used for both external and in-
ternal connections.
Accept or Reject Waiting Calls
R2 To accept a waiting call, dial the sequence shown
at left. Your original call is now on hold.
R1 To return to your original connection, dial the se-
quence shown at left.
You can also accept the waiting call by hanging up
your existing connection, i.e., by hanging up the
handset. In this case the phone rings as soon as
you have hung up. Pick up the handset again to
accept the waiting call.
R0 To reject a waiting call, dial the sequence shown
at left.
FRITZ!Box Fon WLAN 7570 vDSL 80
Call Back on No Response (CCNR) on the ISDN Line
A maximum of five call-back requests can be enabled for
each extension at any given time.
Call Back on No Response (CCNR) on the ISDN Line
The “Call Back on No Response” function can be used when
you dial a number and the party does not respond. Once
the party can be reached again and conducts a call from her
or his phone, this function recognizes when this conversa-
tion is ended. Your phone then rings. When you pick up
your handset, the number of the desired party is automati-
cally dialed again.
Call Back on No Response can be used both for external
and internal connections.
This command can be activated five times for each line.
Call-back on Busy (CCBS)
M You have just dialed a number and now you hear
the busy signal.
5 If the call is not answered, within twenty seconds,
dial either the number 5
or
Rs37r the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset.
K As soon as the subscriber you dialed hangs up,
your telephone will ring.
N Pick up the handset. The subscriber’s number is
dialed again automatically.
Call Back on No Response (CCNR) on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 81
Callback requests can also be deleted manually, with the
oldest callback request being deleted first.
Enable Call Back on No Response (CCNR)
M You have just dialed a number and hear a ring
tone.
5 If the call is not answered, within twenty seconds,
dial either the number 5
or
Rs37r the sequence shown at left.
Q Wait for the acknowledgement tone.
O Hang up the handset. As soon as the party you
dialed completes the conversation being conduct-
ed from her or his phone, your phone rings.
N Pick up the handset. The number of the remote
party is dialed again automatically.
Delete Callback Requests Manually
N Pick up the handset.
r37r Dial the sequence shown at left.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 82
Alternating Between Calls
Alternating Between Calls
Whenever you have one active connection and one caller
on hold, you can switch from one call to the other as often
as you want using the Hold button.
Alternate Between Calls
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on hold.
M To establish a second call, simply dial ss plus
the desired extension number for an internal call,
or the desired external number.
Call 2
P
If the call is answered, you can consult on this
line. The original caller is still on hold.
R2 To switch back from Caller 2 to Caller 1, dial the
sequence shown at left.
Call 1
P
Caller 1 is now active again and Caller 2 is on
hold.
R2 To switch back again from Caller 2 to Caller 1, dial
the same sequence. In this way you can alternate
between the two connections.
End Hold
O The caller on hold hangs up. You can continue
talking on the active connection.
R1 You end the active connection by dialing the se-
quence shown at left. The call that was on hold is
now active again, and there is no call left on hold.
O
K
Call
P
You can also return to the call on hold by hanging
up the handset: this ends the currently active
connection. In this case the phone rings as soon
as you hang up. Pick up the handset again to re-
turn to the last call that was on hold.
Three-Party Conference Call
FRITZ!Box Fon WLAN 7570 vDSL 83
Three-Party Conference Call
FRITZ!Box allows you to hold telephone conferences with
two other people at once. Two external and one internal
party, or two internal and one external party can conduct a
conference call with each other.
Hold a Three-Party Conference Call
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M To establish a second call, simply dial ss plus
the desired extension number for an internal call,
or the desired external number.
You can now conduct a second conversation while
your first call is on hold.
R3 Dial the sequence shown at left to begin a three-
party conference call.
D Now all three participants can confer together. If
either of the other two parties hangs up, your con-
nection with the remaining participant remains
active.
O You can end the three-party call by hanging up the
handset.
R2 You can also switch from the three-party call back
to the original two-party connection. Dial the se-
quence shown at left. This ends the three-party
conference. The connection that was active last
before you initiated the three-party conference is
now active again. The other call is on hold. You
can alternate between the two connections by
dialing the same sequence again.
FRITZ!Box Fon WLAN 7570 vDSL 84
Consultation / Hold
Consultation / Hold
The Consultation/Hold feature allows you to place an exist-
ing call on hold. You then may consult with someone else at
your workplace or dial a second call. The party on hold
does not hear the second conversation. Once you have fin-
ished the consultation, you can return to the original con-
nection.
Consultation / Hold
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on hold
and you can consult someone else.
M To establish a second call, simply dial ss
plus the desired extension number for an in-
ternal call, or the desired external number.
Call 2
P
If the call is answered, you can consult on
this line. The original caller is still on hold.
R If the number you dialed is busy or the call is
not answered, press the Hold button again to
return to Caller 1.
R1 To switch back to Caller 1 after talking on the
second connection, dial the sequence shown
at left. Caller 1 is now active again.
If you return to Caller1 by pressing the Hold button, the
connection to Caller 2 is not cleared down until Caller 2
hangs up.
End Consultation
Call 1
P
You can also return to Caller 1 by hanging up
the handset: this ends the connection to
Caller 2. In this case, your phone rings as
soon as you hang up. Pick up the handset to
return to Caller 1 again.
O Hang up the handset to end the connection.
Transferring Calls
FRITZ!Box Fon WLAN 7570 vDSL 85
Transferring Calls
The “Call Transfer” function allows you to transfer a connec-
tion from one of FRITZ!Box's extension to another.
Explicit Call Transfer (ECT)
Use the “Explicit Call Transfer” function to connect two ex-
ternal parties with each other while one connection is ac-
tive and the other is on hold. Then you can end your own
connection while the other two parties continue their con-
versation.
Transfer Calls
Call 1
P
You are talking to Caller 1.
R Press the Hold button. Caller 1 is now on hold.
ss<Ext.> To establish a connection to Caller 2, dial the
star key twice and then her or his extension
number.
Call 2
P
You can now talk with the other Caller 2.
O To transfer the Caller 1 to Caller 2, simply hang
up the handset.
Explicit Transfer of One Active and One Held Connection
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M Dial the number for your second external call. You can
now conduct a second conversation while your first
call is on hold.
To clear your connection while allowing the external
parties to continue the call, connect the parties with
each other.
R4 Dial the sequence shown at left. The connection on
hold and the active connection are connected with
each other. The external parties continue the call
while you clear the connection.
O Hang up the handset.
FRITZ!Box Fon WLAN 7570 vDSL 86
Explicit Call Transfer (ECT)
Explicit Call Transfer from a Three-party Conference Call
N Pick up the handset.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M Dial the number for your second external call. You can
now conduct a second conversation while your first
call is on hold.
R3 Dial the sequence shown at left to begin a three-party
conference call.
D Now all three participants can confer together. If eit-
her of the other two parties hangs up, your connec-
tion with the remaining participant remains active.
To clear your connections while allowing the external
parties to continue the call, connect the parties with
each other.
R2 You can also switch from the three-party call back to
the original two-party connection. Dial the sequence
shown at left. This ends the three-party conference.
The connection that was active last before you initiat-
ed the three-party conference is now active again. The
second external call is on hold. You can alternate be-
tween the two connections by dialing the same se-
quence again.
R4 Dial the sequence shown at left. The connection on
hold and the active connection are connected with
each other. The external parties continue the call
while you clear the connection.
O Hang up the handset.
One-time Explicit Transfer on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 87
One-time Explicit Transfer on the ISDN Line
Explicit Call Transfer (ECT) is an ISDN feature that must be
enabled by your ISDN provider and thus usually is subject
to extra charges. If ECT has not been enabled on your line,
you can program the telephone system to initiate a one-
time explicit call transfer before connecting to two parties.
When you end the connection, the other two parties will be
connected to each other.
One-time Explicit Transfer
N Pick up the handset.
s32r Dial the sequence shown at left. You hear the ex-
ternal dial tone.
M Dial the external number of the first party. Talk.
R Press the Hold button.
M Dial the number for your second external call. You
can now conduct a second conversation while
your first call is on hold.
To clear your connections while allowing the ex-
ternal parties to continue the call, connect the
parties with each other.
R4 Dial the sequence shown at left. The connection
on hold and the active connection are connected
with each other. The external parties continue the
call while you clear the connection.
O Hang up the handset.
With this type of external transfer, both parties are con-
nected to each other over your PBX. This means that both
Bchannels on your ISDN line remain busy with this con-
nection as long as the parties are connected to each other.
FRITZ!Box Fon WLAN 7570 vDSL 88
Suspending/Resuming a Call on the ISDN Line
Suspending/Resuming a Call on the ISDN Line
The “Suspend/Resume” feature, also known technically as
Terminal Portability, allows you to suspend an existing con-
nection and resume it at another point on the S
0
bus. The
connection can be resumed at a different ISDN terminal de-
vice (such as an ISDN telephone) that is connected to your
BRI line along with the FRITZ!Box.
You will hear an acknowledgement tone to indicate that the
call has been successfully suspended. If you hear the fail-
ure tone, this may indicate that you made a mistake, or that
the “Suspend/Resume” feature is not enabled on your line.
It is also possible that the parked-call ID you chose is al-
ready in use.
You can resume the suspended call using another ISDN de-
vice on the S
0
bus.
Suspend/Resume a Call
P You are talking to a caller.
R Press the Hold button. Caller 1 is now suspended.
s1<PC>s Dial the sequence shown at left. Type in a code for
the suspended call as <PC> (parked-call ID). The
code can be any number between 0 and 99.
You will need to enter this code again when you
resume the call.
Q
O
After the acknowledgement tone, the connection
is suspended. You can hang up the handset. The
call remains suspended at the ISDN provider’s lo-
cal switch for two minutes.
Call Tracing (MCID) on the ISDN Line
FRITZ!Box Fon WLAN 7570 vDSL 89
Call Tracing (MCID) on the ISDN Line
You can use this function during a call or after the caller
hangs up. For more information about this feature, contact
your ISDN provider.
Room Monitoring (Baby Monitor)
The following key sequence enables the function for moni-
toring the sound level in a room. First enter the volume lev-
el (a value between 1 and 8). Enter a telephone number. Do
not hang up the handset! When the volume in the room
reaches the specified level, the number you entered will be
dialed. When the telephone rings and you pick up the
handset, you will be connected with the telephone on
which you enabled the room monitoring function.
Dial the number of the extension to listen in at an extension
with room monitoring activated.
Call Tracing (MCID)
Rs39r Dial the sequence shown at left.
When using this feature, it is advisable to activate the
speaker phone function.
Enable Room Monitoring
N Pick up the handset or activate the speaker
phone function of your telephone.
s4
<level>
s
<number>
r
Dial the sequence shown at left. For <level>,
enter a number between 1 (the most sensi-
tive sound level) and 8. For <number>, enter
the number to be called. This may be the num-
ber of another internal extension, a 9 for an
internal group call, or any external number de-
sired.
Q Wait for the acknowledgement tone. The baby
monitoring phone function is now enabled.
Do not hang up the handset!
FRITZ!Box Fon WLAN 7570 vDSL 90
Using Keypad Messages
After initiating a room monitoring phone call, the PBX can-
not generate a new call until at least one minute has
lapsed.
You can disable the function by simply hanging up the
handset of the telephone at which you enabled it.
Using Keypad Messages
The “keypad” function allows you to control services and
features on the telephone line (ISDN/analog) by entering
characters and strings on the telephone keypad.
These keyboard entries are called keypad messages. Ask
your telephone carrier for the specific keypad messages to
access ISDN features.
Enter Keypad Messages on an Extension with Automatic Outside
Dialing
N Pick up the handset.
sr<Seq> Dial the sequence shown at left. <Seq> stands for
the keypad sequence you received from your tele-
phone carrier.
Enter a Keypad Sequence on an Extension without Automatic
Outside Dialing
N Pick up the handset.
0sr<Seq> Dial the sequence shown at left. <Seq> stands for
the keypad sequence you received from your tele-
phone carrier.
Troubleshooting
FRITZ!Box Fon WLAN 7570 vDSL 91
10 Troubleshooting
Help for Errors
This chapter provides concrete assistance if you are not able to open the
user interface of your FRITZ!Box, if you are having problems with the
WLAN connection, or if you want to change the IP settings on your com-
puter.
10.1 Errors Opening the User Interface
If an error message is returned when you open the user in-
terface, this can have various causes. Check the possible
causes and attempt to resolve the error.
Restarting the FRITZ!Box
The user interface cannot be opened or does not react.
Inconsistencies within the FRITZ!Box.
1. Restart the FRITZ!Box.
Remove the power cable from the socket.
2. Wait about five seconds before reconnecting to the
power supply.
3. Try again to open the FRITZ!Box user interface by en-
tering fritz.box
in the address field.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7570 vDSL 92
Checking the Cable Connections
Checking the Cable Connections
The user interface of the FRITZ!Box does not appear in the
window of your web browser.
The cable connections are not secure.
Make sure that all cable connections are plugged in securely.
Check the Name Resolution
The user interface of the FRITZ!Box cannot be opened by
entering fritz.box
.
The name resolution of the FRITZ!Box does not work.
1. In the web browser, enter the following IP address in
place of fritz.box
:
192.168.178.1
2. If the user interface cannot be reached via this ad-
dress, check the settings configured for your network
adapter as described in section “IP Settings” from
page 102.
Possible Cause
Remedy
Possible Cause
Remedy
Checking the IP Address
FRITZ!Box Fon WLAN 7570 vDSL 93
Checking the IP Address
The user interface of the FRITZ!Box cannot be reached at
the address fritz.box nor at 192.168.178.1.
The IP address set on the connected computer is inapplica-
ble.
Set the network adapter used to DHCP so that the IP ad-
dress can be obtained via the DHCP server of the FRITZ!Box.
Adjust the settings to those described in the section “IP
Settings” from page 102.
Disabling Dial-Up Connections
The user interface is not opened; a window for a dial-up
connection appears instead.
The browser must use the network connection between the
computer and FRITZ!Box when the user interface is opened.
For this the automatic establishment of a Dial-Up Network-
ing connection must be disabled.
You can disable the automatic attempt to establish a Dial-
Up Networking connection. The following example explains
how to check the settings of Internet Explorer 6:
1. Select the “Connections” settings page under “Tools /
Internet Options....
2. In the “Dial-up and Virtual Private Network settings”
section, enable the option “Never dial a connection”.
3. As a final step, click “OK”.
Possible Cause
Remedy
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7570 vDSL 94
Disabling Online Operation
Disabling Online Operation
The user interface does not appear in the window of your
web browser.
The web browser is set for offline operation.
Configure the web browser for online operation. Using the
example of Internet Explorer 6:
1. Open the “File” menu.
2. If a checkmark is displayed in front of “Work Offline”,
click this line.
The checkmark will be removed and Internet Explorer will
switch to online operation.
Checking the Proxy Settings
The user interface does not appear in the window of your
web browser.
The proxy settings of the web browser prevent the user in-
terface from being opened.
Enter the DNS name and the IP address of the FRITZ!Box as
an exception in the proxy settings of the web browser.
1. Select the “Connections” settings page under “Tools /
Internet Options....
2. Click the “LAN Settings...” button in the “Local Area Net-
work (LAN) settings” area, and in the next window, click
the “Advanced...” button in the “Proxy server” area.
Possible Cause
Remedy
Possible Cause
Remedy
Checking the CGI Settings
FRITZ!Box Fon WLAN 7570 vDSL 95
3. Under “Exceptions enter: “fritz.box; 192.168.178.1;
169.254.1.1” and click “OK”.
Checking the CGI Settings
The user interface does not appear in the window of your
web browser.
The execution of CGI scripts is disabled in the web browser.
Configure the web browser so that the execution of scripts
is allowed in the user interface. Using the example of the
Internet Explorer 6:
1. Select “Tools / Internet Options... / Security”.
2. If the “Default Level” button is not available for selec-
tion, the “Medium” security level is already config-
ured, which means that CGI scripts can be executed in
the Internet browser.
3. Proceed as follows if the “Default Level” button is
available for selection:
4. Select the “Local Intranet” icon and click the “Sites...”
button.
5. In the next window, click the “Advanced...” button and
enter in the “Add this Web site to the zone:” field:
fritz.box
6. Disable the option “Require server verification (https:)
for all sites in this zone”.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7570 vDSL 96
Checking the Security Software
Checking the Security Software
The user interface cannot be displayed in the web browser.
Security software is blocking access to the user interface.
Security software like firewalls can prevent access to the
user interface of the FRITZ!Box. Configure exceptions for the
FRITZ!Box in all of the enabled security software.
Opening the User Interface of the FRITZ!Box
The FRITZ!Box is equipped with a fixed IP address that can-
not be changed. FRITZ!Box always can be reached at this IP
address. This fixed IP address is:
Proceed as follows to open the FRITZ!Box user interface
using this IP address:
1. Connect the FRITZ!Box to the computer using the net-
work cable (yellow). For more information, see the sec-
tion “Connecting Computer(s) to the LAN Port” from
page 18.
2. Make sure that the computer obtains its IP address
automatically. You can check this setting in the com-
puter’s IP settings (see section “IP Settings” from
page 102).
3. Restart your computer.
Possible Cause
Remedy
If you would like to exit security software to test access to
the FRITZ!Box, remove the DSL/VDSL cable first! After test-
ing, first start the security software before reinserting the
DSL/VDSL cable and connecting to the Internet.
Fixed IP Address 169.254.1.1
The WLAN Adapter Cannot Find FRITZ!Box
FRITZ!Box Fon WLAN 7570 vDSL 97
4. Start your Internet browser and enter FRITZ!Box’s fixed
IP address:
169.254.1.1
The FRITZ!Box user interface opens.
10.2 The WLAN Adapter Cannot Find FRITZ!Box
If the radio network “FRITZ!Box Fon WLAN 7570 vDSL” is not
found by the WLAN adapter of a computer, work through
the following steps to find the source of the error and re-
solve it.
Enabling the WLAN Adapter
The WLAN adapter cannot find a wireless network.
The WLAN adapter is not ready for operation.
Make sure that the WLAN adapter is ready for operation.
Some of the WLAN adapters installed in notebooks must be
activated by flipping a switch on the notebook.
Once you have reached the FRITZ!Box user interface again,
you should check the FRITZ!Box settings and correct them
if necessary.
Possible Cause
Remedy
For questions on the WLAN adapter of your computer,
please contact the manufacturer.
FRITZ!Box Fon WLAN 7570 vDSL 98
Enabling WLAN
Enabling WLAN
The wireless network of the FRITZ!Box is not found by the
WLAN adapter.
WLAN is not enabled in the FRITZ!Box. If the “WLAN” LED on
the FRITZ!Box is not lit up or is flashing, this means that
WLAN is not enabled.
Press the WLAN button on the FRITZ!Box. The “WLAN” LED
begins flashing and then remains lit. This means that the
WLAN function is enabled.
Announcing the Name of the Radio Network
The WLAN Adapter cannot find the wireless network of the
FRITZ!Box.
The name of the wireless network of the FRITZ!Box is con-
cealed.
Enable the setting “Announce name of the radio network
(SSID)” in the WLAN settings of the FRITZ!Box.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computer(s) to the LAN Port” on page 18.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Select the “Advanced Settings / WLAN / Radio Set-
tings” menu and enable the setting “Announce name
of the radio network (SSID)”.
Possible Cause
Remedy
Possible Cause
Remedy
WLAN Connection Is Not Established
FRITZ!Box Fon WLAN 7570 vDSL 99
6. Click the “Apply” button.
7. Remove the network cable and try again to establish a
connection via WLAN.
10.3 WLAN Connection Is Not Established
Comparing the Security Settings for WLAN
Make sure that the WLAN security settings registered in the
FRITZ!Box agree with the security settings of the WLAN
adapter.
Here is how to view the WLAN security settings of the
FRITZ!Box and print them out.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computer(s) to the LAN Port” from page 18.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Select the “Advanced Settings / WLAN / Security”
menu.
6. Click the “Apply” button.
A window is displayed with the WLAN security set-
tings. Print out this page by clicking the “Print Page”
button at the upper left of the page.
7. Remove the network cable and check the configura-
tion of the WLAN adapter in the printout. Try again to
establish a connection.
FRITZ!Box Fon WLAN 7570 vDSL 100
Testing the WLAN Connection Without Security Settings
Testing the WLAN Connection Without Security
Settings
Disable the WLAN security settings to test whether a WLAN
connection between the FRITZ!Box and the WLAN adapter is
possible at all.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computer(s) to the LAN Port” from page 18.
2. Open the user interface in a web browser. Proceed as
described in the section “Opening the User Interface”
on page 29.
3. In the “Advanced Settings / WLAN / Security” menu
and select “Enable Access without Encryption”. As a
final step, click “Apply”.
4. Remove the network cable and try again to establish a
connection.
If the attempt to connect to the WLAN using the non-en-
crypted connection is not successful either, check the
installation of the WLAN adapter and contact the manufac-
turer of the WLAN adapter if necessary.
Enable WLAN encryption again after completing the tests.
Follow the steps listed above and then enable the kind of
encryption that was previously configured.
This non-secured condition should be used only for
testing, to find out whether a WLAN connection is
possible at all.
Installing the Patch for WPA2 with Microsoft WLAN Service
FRITZ!Box Fon WLAN 7570 vDSL 101
Installing the Patch for WPA2 with Microsoft WLAN
Service
The WLAN connection to FRITZ!Box cannot be established
using the Microsoft WLAN Service (WZC = Windows Zero
Configuration) in Windows XP with Service Pack 2.
The required Microsoft patch for WPA2 (IEEE 802.11i) may
not be not installed.
Support for WPA2 in Microsoft WLAN service was not availa-
ble until the current patch for Microsoft Windows XP Ser-
vice Pack 2. Install the current patch from Microsoft:
support.microsoft.com/kb/917021
Alternatively, you can install Service Pack 3 instead.
Ruling Out Interference Caused by Other Wireless
Networks
If there are other devices in the immediate vicinity of your
FRITZ!Box that use the 2.4-GHz band, simultaneous use of
frequencies can result in mutual interference (for example,
fluctuations or interrupted connections). Disruptions can
also be caused by other WLAN access points, or by
Bluetooth devices, garage door openers or wireless AV
bridges. In this case, please test a different radio channel
for your FRITZ!Box.
1. Connect the FRITZ!Box to a computer using a network
cable. Proceed as described in the section “Connect-
ing Computer(s) to the LAN Port” from page 18.
2. Start a web browser.
3. Enter fritz.box
in the address field.
4. Select the “Settings” menu.
5. Open the “Advanced Settings / WLAN / Radio Set-
tings” menu.
Possible Cause
Remedy
FRITZ!Box Fon WLAN 7570 vDSL 102
IP Settings
6. Select a different radio channel from the “Select radio
channel” list.
7. Click the “Apply” button.
8. Remove the network cable and check whether interfer-
ence continues to occur.
10.4 IP Settings
The FRITZ!Box is equipped with its own DHCP server. This
means that the connected computers obtain their IP ad-
dresses from the FRITZ!Box. The connected computers must
be configured such that they can receive their IP addresses
automatically. The steps for checking and adjusting this op-
tion differ among the operating systems. See the relevant
section for your operating system.
Obtaining an IP Address Automatically in
Windows Vista
1. Click the “Start” button in the task bar and select
“Control Panel / Network and Sharing Center”.
2. From the “Tasks”, select “Manage network connec-
tions”.
3. In the “LAN or High-Speed Internet” area, select the
LAN connection between your computer and the
FRITZ!Box. Click the right mouse button and select
“Properties”.
4. If the “User Account Control” window is displayed,
click “Continue” in this window.
5. Under “This connection uses the following items”, se-
lect the “Internet Protocol Version 4 (TCP/IPv4)” entry
and click “Properties”.
If FRITZ!Box is operated in a network, no other DHCP server
may be activated in this network. If you need to operate a
DHCP server, please disable the DHCP feature in the “Ad-
vanced System Settings”.
Obtaining an IP Address Automatically in Windows XP
FRITZ!Box Fon WLAN 7570 vDSL 103
6. On the “General” tab, enable the options “Obtain an
IP address automatically” and “Obtain DNS server ad-
dress automatically”.
.
Properties of the Internet protocol (TCP/IP)
7. Confirm your selection by clicking “OK.
If necessary, repeat steps 5 through 7 for the “Internet
Protocol Version 6 (TCP/IPv6)” as well.
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in Windows XP
1. Go to “start / Control Panel / Network and Internet
Connections / Network Connections” and double-click
on the LAN connection icon of the network adapter
connected to FRITZ!Box.
2. Click the “Properties” button.
3. Select “Internet Protocol (TCP/IP)” in the list of items
used in this network connection and clickProper-
ties”.
4. Enable the options “Obtain an IP address automatical-
ly” and “Obtain DNS server address automatically”.
FRITZ!Box Fon WLAN 7570 vDSL 104
Obtaining an IP Address Automatically in Windows 2000
Properties of the Internet protocol (TCP/IP)
5. Confirm your selection by clicking “OK”.
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in
Windows 2000
1. Select “Start / Settings / Control Panel / Network and
Dial-up Connections”.
2. Double-click to select the LAN connection with the net-
work adapter bound to FRITZ!Box.
3. Click the “Properties” button.
4. Double-click to select “Internet Protocol (TCP/IP)” in
the list of network components.
Obtaining an IP Address Automatically in Mac OS X
FRITZ!Box Fon WLAN 7570 vDSL 105
Properties of the LAN connection of a network adapter
5. Enable the options “Obtain an IP address automatical-
ly” and “Obtain DNS server address automatically”.
Properties of the Internet protocol (TCP/IP)
6. Confirm your selection by clicking “OK”.
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in Mac OS X
1. Select the “System Preferences” in the Apple menu.
2. In the “System Preferences” window, click the “Net-
work” icon.
3. In the “Network” window, select the “Built-in Ether-
net” entry from the “Show:” drop-down menu.
4. Switch to the “TCP/IP” settings page and select the
“Using DHCP:” option from the “Configure IPv4” drop-
down menu.
5. Click “Apply Now”.
FRITZ!Box Fon WLAN 7570 vDSL 106
Obtaining an IP Address Automatically in Linux
The computer now receives an IP address from the
FRITZ!Box.
Obtaining an IP Address Automatically in Linux
For comprehensive information and tips on the topic of net-
work configuration in Linux, see, for example:
http://www.tldp.org/HOWTO/NET3-4-HOWTO-5.html
Uninstallation
FRITZ!Box Fon WLAN 7570 vDSL 107
11 Uninstallation
Removing Software and Program Entries
This chapter describes how to:
disconnect the FRITZ!Box from the computer
uninstall the FRITZ!DSL software package
remove the printer port
remove the FRITZ!Box program group.
11.1 Disconnecting the FRITZ!Box from the Computer
LAN Port If the computer is connected to one of the LAN ports on the
FRITZ!Box, simply remove the network cable.
If the computer is connected to the FRITZ!Box via a network
hub or switch, remove the network cable between the com-
puter and the network hub or switch.
WLAN If the computer is connected to the FRITZ!Box wirelessly via
WLAN, deactivate the WLAN connection to FRITZ!Box in the
WLAN adapter of the computer.
11.2 Removing the Printer Port
The AVM FRITZ!Box printer port is removed using the Con-
trol Panel of the Windows operating system.
Removing the Printer Port in Windows Vista
1. Open “Start / Settings / Control Panel / Programs and
Functions”.
2. Select the “AVM FRITZ!Box Printer Port” entry from the
list.
3. Click the “Uninstall/Change” button.
4. Confirm the next query by clicking “Continue”.
This concludes the uninstallation of the printer port.
FRITZ!Box Fon WLAN 7570 vDSL 108
Removing the Printer Port in Windows XP
Removing the Printer Port in Windows XP
1. Open “start / Control Panel / Add or Remove Pro-
grams. Make sure that theChange or Remove Pro-
grams” button is selected in the left-hand column.
2. Select the “AVM FRITZ!Box Printer Port” entry from the
list of “Currently installed programs”.
3. Click the “Change/Remove” button.
This concludes the uninstallation of the printer port.
Removing the Printer Port in Windows 2000
1. Open “Start / Settings / Control Panel / Add/Remove
Programs”. Make sure that the “Change or Remove
Programs” button is selected in the left-hand column.
2. Select the “AVM FRITZ!Box Printer Port” entry from the
list of “Currently installed programs”.
3. Click the “Change/Remove” button.
This concludes the uninstallation of the printer port.
11.3 Removing the Program Group
Remove the “FRITZ!Box” program group using the Control
Panel of the Windows operating system.
Removing the Program Group in Windows Vista
1. Open “Start / Settings / Control Panel / Programs and
Functions”.
2. Select the “AVM FRITZ!Box Documentation” entry from
the list.
3. Click the “Uninstall/Change” button.
4. Confirm the next query by clicking “Continue”.
This concludes the uninstallation of the program group.
Removing the Program Group in Windows XP
FRITZ!Box Fon WLAN 7570 vDSL 109
Removing the Program Group in Windows XP
1. Open “start / Control Panel / Add or Remove Pro-
grams. Make sure that theChange or Remove Pro-
grams” button is selected in the left-hand column.
2. Select the “AVM FRITZ!Box Documentation” entry from
the list of “Currently installed programs”.
3. Click the “Change/Remove” button.
This concludes the uninstallation of the program group.
Removing the Program Group in Windows 2000
1. Open “Start / Settings / Control Panel / Add/Remove
Programs”. Make sure that the “Change or Remove
Programs” button is selected in the left-hand column.
2. Select the “AVM FRITZ!Box Documentation” entry from
the list of “Currently installed programs”.
3. Click the “Change/Remove” button.
This concludes the uninstallation of the program group.
FRITZ!Box Fon WLAN 7570 vDSL 110
Directions for Operation
12 Directions for Operation
Symbols, Keys and LEDs
The following sections present important information and tips for opera-
tion of the FRITZ!Box Fon WLAN 7570 vDSL.
12.1 Symbols and Highlighting
The table below explains the highlighting used in this man-
ual.
This symbol indicates useful hints to assist you in working
with the FRITZ!Box.
This symbol indicates important instructions that must be
observed to avoid malfunctions.
Highlighting Function Examples
Quotation marks Keys
Buttons
Settings pages
Menus
Commands
File paths
File names
“F1” key
“Help”
“Advanced”
“Edit/Paste”
“Copy
“C:/My Documents”
“Documentation”
Underlined text Text input www.avm.de/en
fritz.box
Pointed brackets Joker <MSN>
Bold Emphasis Do not click the but-
ton...
The Telephone Keypad
FRITZ!Box Fon WLAN 7570 vDSL 111
12.2 The Telephone Keypad
12.3 Instructions for Operation at the Telephone
0 through 9 Numeric keys
s Asterisk key
R Hold or Flash key
r Pound key
M Dial a number.
N Pick up the handset.
O Hang up the handset.
P Talk
D Three-party conference call
Q Wait for the acknowledgement tone.
K You hear the ring tone.
<Ext.> Enter an extension number (Ext.).
In the place of the abbreviation <Ext.> used
here, enter the number 1, 2, or a higher
number, corresponding to the extension
you would like to configure.
<MSN> Enter an ISDN number (MSN).
In place of the abbreviation <MSN> used
here, enter the complete MSN desired, wit-
hout any dialing prefix.
<DNo> Enter an external telephone number (desti-
nation number).
In the place of the abbreviation <DNo>, enter
the complete number of the external line.
<DNo./Ext.> Enter the external telephone number (desti-
nation number) or extension number (Ext.)
to which your calls are to be diverted.
FRITZ!Box Fon WLAN 7570 vDSL 112
LEDs
12.4 LEDs
Twelve LEDs are built into the top of the FRITZ!Box Fon
WLAN 7570 vDSL, which flash or light up to display various
connection statuses.
LED Status Meaning
INFO on a telephone connection between two Internet telephony
subscribers is active; the call is free of charge (this function
must be supported by your Internet telephony provider)
signals an event that can be configured freely by the user
the Stick & Surf procedure has been concluded
flashes
the value specified for the online meter has been reached
signals an event that can be configured freely by the user
Stick & Surf procedure in progress
logon procedure for a DECT handset in progress
LAN 1 - LAN 4 on a network cable is plugged in and the connection to the comput-
er is working
flashes data are transmitted over the LAN connection
WLAN on the WLAN function is enabled
flashes the WLAN function is being enabled or disabled
Power/DSL on FRITZ!Box on standby
the device has electrical power and the DSL/VDSL line is
ready for operation
flashes
the device has electrical power
the connection to DSL/VDSL is being established or has be-
en interrupted
Update on firmware is being updated
DECT on the DECT function is enabled
flashes registration procedure for a DECT handset in progress
Online on an Internet connection is established
Internet on a telephone connection to the Internet is active
Handset and Ring Patterns
FRITZ!Box Fon WLAN 7570 vDSL 113
12.5 Handset and Ring Patterns
The following diagram illustrates the duration and intervals
of the various handset and ring signals on the connected
telephones.
Handset and ring patterns on FRITZ!Box Fon WLAN 7570 vDSL
Internet flashes there are messages in your mailbox (this function must be sup-
ported by your telephony carrier)
Fixed Line on a telephone connection via the telephone line (ISDN/analog) is
active
flashes there are messages in your mailbox (this function must be sup-
ported by your telephony carrier)
LED Status Meaning
Here you can define what additional information should be
displayed on the “INFO” LED. For details, see the ”Settings
/ Advanced Settings / System / “INFO” Display” section of
the FRITZ!Box Fon WLAN 7570 vDSL user interface.
Audible Signals
Time in seconds
Ring
Busy signal
Internal dial tone
External dial tone
Positive confirmation
Neg. acknowledgment
Call waiting
Calls
External call
Internal call
Call back
012
3
4
56
Internet telephony
Registration error
Fixed-line substitute
FRITZ!Box Fon WLAN 7570 vDSL 114
Product Details
II PRODUCT DETAILS AND USEFUL INFORMATION
1Product Details
FRITZ!Box Fon WLAN 7570 vDSL
This chapter provides you with product details on FRITZ!Box Fon WLAN
7570 vDSL. You receive information on the cables and buttons, technical
data and further details.
1.1 Cables and Buttons
See the information in the following section on the individ-
ual cables and switches on the FRITZ!Box Fon WLAN 7570
vDSL.
Telephone Cable
The DSL/VDSL cable is a special combined cable developed
by AVM to connect the FRITZ!Box Fon WLAN 7570 vDSL to
the DSL/VDSL splitter and the ISDN NT or analog telephone
line.
If you need a longer cable, you can extend one or multiple
ends of the combined cable using RJ45 double couplings.
Which ends of the cable you extend depends on the spatial
conditions at your location.
You will need the following components to extend the
length of your cable:
1 standard network cable
1 standard RJ45 CAT5 double coupling
Both components are available from specialized vendors.
AVM recommends that the standard network cable be ex-
tended by no more than 10 meters.
Remember that the quality of the line may be decrease as
the distance from the central switching station increases.
Network Cable
FRITZ!Box Fon WLAN 7570 vDSL 115
Network Cable
The FRITZ!Box Fon WLAN 7570 vDSL network cable (yellow)
is a standard Ethernet cable. If you need a replacement ca-
ble, a longer cable or an extension, use a standard STP-type
(Shielded Twisted Pair, 1:1) CAT5 Ethernet cable. To extend
the cable you will also need a standard CAT45 double cou-
pling link to RJ5. You can use either straight cable or cross-
link cable. All components are available from specialized
vendors.
AVM recommends using a network cable no more than 100
meters long.
1.2 WLAN Button
The FRITZ!Box is equipped with a WLAN button on the rear
panel of the housing.
The WLAN button can be used to activate and deactivate
WLAN.
1.3 DECT Button
The FRITZ!Box is equipped with a DECT button on the rear
panel of its housing. The DECT button has two functions:
1. Ring to search for misplaced handsets (paging call):
If you press the DECT switch once briefly, the handset
will ring.
2. Start the login procedure to register handsets:
How to register a DECT handset is explained in the
section “The DECT Function” from page 32.
Additional network cable is required if you would like to
use all of the FRITZ!Box Fon WLAN 7570 vDSL network
ports.
FRITZ!Box Fon WLAN 7570 vDSL 116
Technical Specifications
1.4 Technical Specifications
Ports and Interfaces
DSL/VDSL/telephone port
DSL/VDSL modem in accordance with the standard
ITU G.992.1, ITU G.992.3 (ADSL2), ITU G.992.5
(ADSL2+), ITU G.994.1 (G.hs)
Telephone port for connecting to the analog net-
work or ISDN
Two a/b ports for connecting two extensions via RJ11
sockets
One ISDN S
0
NT port
S
0
bus with support for ISDN telephony devices;
the CIP services voice, telephony, audio 3.1 and
fax G2/G3 are supported.
DECT GAP base station
Four LAN ports via RJ45 sockets (standard Ethernet,
10/100 base-T)
One USB host controller (USB version 2.0)
WLAN Access Point with support for wireless networks
IEEE 802.11a – 54 Mbit/s
IEEE 802.11b – 11 Mbit/s
IEEE 802.11g – 54 Mbit/s
IEEE 802.11n draft 2.0 – 300 Mbit/s
Router Function
DSL/VDSL router
DHCP server
Firewall with IP masquerading/NAT
User Interface and Display
FRITZ!Box Fon WLAN 7570 vDSL 117
User Interface and Display
Configuration and status messages via a web browser
on a connected computer
Twelve LEDs indicate the condition of the device
Physical Specifications
Dimensions (WxDxH): approx. 210 x 155 x 25 mm
Supply voltage: 230 V / 50 Hz
Maximum power consumption: 16 W
Average power consumption: 6 W
Firmware can be updated
Conform to CE standards
FRITZ!Box Fon WLAN 7570 vDSL 118
Declaration of CE Conformity
1.5 Declaration of CE Conformity
The manufac-
turer
AVM GmbH
Alt-Moabit 95
D-10559 Berlin
herewith declares that the product
FRITZ!Box Fon WLAN 7570 vDSL
Type: ADSL/VDSL WLAN Router
complies with the following directives:
1999/5/EC R&TTE Directive: Radio Equipment and Telecommunica-
tions Terminal Equipment
2004/108/EEC EMC Directive: Electromagnetic Compatibility
73/23/EEC Low Voltage Directive: Electrical equipment designed for
use within certain voltage limits
The following norms were consulted to assess conformity:
- EN 60950-1:2006
- CTR 3/1998.06.17
- ETSI TS 101 388 V1.4.1 (2007-08)
- ITU-T G.992.1
- ITU-T G.992.2
- ITU-T G.992.3
- ITU-T G.992.4
- ITU-T G.992.5
- ITU-T G.994.1
- ETSI ETR 328 (1996-11)
- ITU-T G.993.1
- ITU-T G.993.2
- EN 301 489-1 V1.8.1 (2008)
- EN 301 489-17 V1.3.2 (2008)
- EN 55024/9.98 + A1/10.01 + A2/01.03
- EN 300 328 V1.6.1 (11.2004)
- EN 301 893 V1.4.1 (07.2007)
- EN 301 406 V1.5.1 (2003)
- EN 301 489-1 V1.8.1 (2008)
- EN 301 489-6 V1.3.1 (2008)
The CE symbol confirms that this product conforms with the above men-
tioned norms and regulations.
Berlin, 02/06/2009 Peter Faxel, Technical Director
Disposal
FRITZ!Box Fon WLAN 7570 vDSL 119
1.6 Disposal
The symbols shown below mean that old appliances and
electronic parts must be disposed of separate from house-
hold waste.
Symbols for labeling electronic devices
In accordance with European regulations and the Electrical
and Electronic Equipment Act (ElektroG), the FRITZ!Box Fon
WLAN 7570 vDSL, as well as all devices and electronic com-
ponents contained in the FRITZ!Box Fon WLAN 7570 vDSL
package may not be disposed with household waste.
Please bring these to your local collection points for dispos-
al.
Indication of Countries
The radio technology of this device is designed for use in all countries of
the European Union and in Switzerland, Norway and Iceland. In France
only indoor operation is permitted.
FRITZ!Box Fon WLAN 7570 vDSL 120
More about WLAN
2More about WLAN
AVM and WLAN
WLAN (Wireless Local Area Network) is a radio technology
that allows Ethernet networks and access to the Internet to
be provided without cable connections. This allows multi-
ple users to share one wireless Internet connection.
2.1 Standards
The WLAN standards IEEE 802.11a, IEEE 802.11b,
IEEE 802.11g and IEEE 802.11n (on the basis of the prelimi-
nary draft 2.0 of the standard) and IEEE 802.11i were devel-
oped by the Institute of Electrical and Electronic Engineers
(IEEE).
The standards IEEE 802.11a, IEEE 802.11b, IEEE 802.11g
and IEEE 802.11n define the transmission rate within a
wireless LAN. The IEEE 802.11i standard is a security stan-
dard.
Standards for the Throughput Rate
Data throughput The FRITZ!Box supports your choice of the standards
IEEE 802.11a, IEEE 802.11b, IEEE 802.11g and IEEE 802.11n.
WLAN adapters based on one or more of the standards list-
ed can be used for WLAN connections with the FRITZ!Box.
The standards are intended for different frequency bands.
The throughputs listed differentiate between gross and net
transmission rates. The net speed describes the transmis-
sion rate of the user data.
Standard Frequency Band Gross Data Throughput up
to
Net Data Throughput up to
802.11a 5GHz 54 Mbit/s 25 Mbit/s
802.11b 2.4 GHz 11 Mbit/s 5 Mbit/s
802.11g 2.4 GHz 54 Mbit/s 25 Mbit/s
802.11n 2.4 / 5 GHz 300 Mbit/s 100 Mbit/s
Standards for the Throughput Rate
FRITZ!Box Fon WLAN 7570 vDSL 121
Range The range within a WLAN is highly dependent on the follow-
ing factors:
the WLAN adapter used
the structural conditions
the amount of radio traffic on the same frequency
band. Other WLAN networks, microwave ovens or
Bluetooth transmitters (mobile telephones) may be
active.
IEEE 802.11a Because this standard works exclusively in the seldom
used 5-GHz range, it offers the opportunity to transmit data
relatively free of interference from external influences.
WLAN adapters that support 802.11a are much less com-
mon that devices that work in accordance with the
802.11b/g standard.
IEEE 802.11b With a maximum throughput rate of 11 Mbit/s, this is the
oldest standard for radio networks. Older WLAN adapters of
the first generation can communicate with the FRITZ!Box
using 802.11b. However, if the WLAN adapter supports
newer standards such as 802.11g, the latest standard
should be used.
IEEE 802.11g This is currently the most common WLAN standard. It com-
municates with a maximum of 54 Mbit/s gross in the 2.4-
GHz frequency range (ISM) and guarantees broad compati-
bility with many WLAN devices.
However, due to heavy use of the 2.4-GHz range, interfer-
ence is more common than in the less-used 5-GHz range.
IEEE 802.11n This standard allows for high throughput rates and ranges.
The FRITZ!Box supports 802.11n in the 2.4-GHz frequency
band, or, if desired, also in the 5-GHz frequency band. Mod-
ulation processes and antenna techniques like MIMO (Mul-
tiple Input, Multiple Output) use the entire frequency band
available more effectively than the older standards.
The use of the 802.11n standard—and thus the availability
of higher throughput ratesis possible only if the WLAN
connection is secured using the WPA2 security mechanism
(AES-CCMP).
FRITZ!Box Fon WLAN 7570 vDSL 122
The Standard for Security
Combining this standard with the 802.11g ensures compati-
bility with older WLAN adapters.
The Standard for Security
IEEE 802.11i The WPA2 security mechanism is defined in the
IEEE 802.11i standard. WPA2 is an extension of the familiar
security mechanism WPA (Wi-Fi Protected Access).
The main feature of the extension of WPA to WPA2 is the
AES-CCMP encryption process:
FRITZ!Box supports the AES encryption procedure as part of
the WPA2 mechanism, and the TKIP encryption procedure
as part of the WPA mechanism. This means that the
FRITZ!Box can be used in combination with any WLAN
adapters that also support WPA2 with AES or WPA with TKIP.
2.2 Security
Security is of utmost importance within radio networks.
Therefore it is important that no unauthorized users can
register in a WLAN to use its Internet access or shared net-
work resources.
FRITZ!Box includes settings on various levels that contrib-
ute to the security of your WLAN and thus to the security of
your computers.
Mechanism Encryption
WPA TKIP (Temporary Key Integrity Protocol)
WPA2 TKIP
AES-CCMP
AES-CCM
based on the extremely secure AES (Advan-
ced Encryption Standard) procedure. CCM
(Counter with CBC-MAC Protocol) defines
how the AES procedure is applied to WLAN
packets.
Radio signals can also be received outside of office or resi-
dential spaces and abused for criminal purposes.
Encryption
FRITZ!Box Fon WLAN 7570 vDSL 123
Encryption
The most important security setting is encryption.
FRITZ!Box supports the security mechanisms WEP (Wired
Equivalent Privacy), WPA (Wi-Fi Protected Access) and
WPA2 as follows:
As part of the WEP mechanism a static key is deter-
mined to serve for the encryption of the user data.
Enter the key in the WLAN security settings of the
FRITZ!Box. All of the WLAN adapters in your wireless
network must also use this key.
The WPA and WPA2 mechanisms provide for authenti-
cation while the connection is being established. For
this a WPA password must be defined.
When WPA is selected, the TKIP encryption method is
used to encrypt the user data. In WPA2 the AES-CCMP
encryption method is used.
The encryption method you configure here must also
be supported by your WLAN adapter.
The user data are encrypted using an automatically
generated key. This key is regenerated at regular inter-
vals.
The WPA password used may be 8 to 63 characters in
length. For increased security, however, the password
should be at least 20 characters long. Use numerals,
letters and special characters and combine capitals
and lower-case letters.
Default Setting In the FRITZ!Box a method combining WPA + WPA2 encryp-
tion with the TKIP/AES-CCMP encryption method is precon-
figured. This setting allows you to use WLAN adapters that
support WPA (TKIP) or WPA2 (AES-CCMP) or both methods.
It is advisable to change the preconfigured WLAN key as
soon as possible. Changes to the settings can be config-
ured on the FRITZ!Box user interface.
FRITZ!Box Fon WLAN 7570 vDSL 124
Encryption
Recommendation If your WLAN adapter supports an encryption method that
is more secure than the one preconfigured in the FRITZ!Box,
you should select the more secure encryption method in
your FRITZ!Box.
To configure the best security settings possible with
FRITZ!Box and your WLAN adapter, please note the follow-
ing recommendations:
If your WLAN adapter supports WPA2 in accordance
with the 802.11i standard:
Enable WPA encryption.
Select the WPA mode “WPA2 (CCMP)” or
WPA+WPA2”.
Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports the WPA mechanism,
but not the WPA2 mechanism:
Enable WPA encryption.
Select the WPA mode “WPA (TKIP)” or
WPA+WPA2”.
Replace the WPA network key with a new, unique
value.
If your WLAN adapter supports neither the WPA nor the
WPA2 mechanism:
Enable WEP encryption.
Replace the WLAN key with a new, unique value.
We strongly recommend the use of a WLAN adapter that
supports WPA or WPA2 (for instance, the FRITZ!WLAN USB
Stick N). WEP is out of date and data encrypted with WEP
can be deciphered within minutes.
Frequency Ranges
FRITZ!Box Fon WLAN 7570 vDSL 125
2.3 Frequency Ranges
WLAN uses the frequency range around 2.4 GHz in the ISM
band or, alternatively, the frequency range at 5 GHz.
You can use both frequency ranges with the FRITZ!Box.
2.4-GHz Frequency
Band
A WLAN in the 2.4-GHz frequency band works in the same
band as Bluetooth, microwave devices and many cordless
telephones. This means that interference may occur within
WLANs operated in the vicinity of such devices. Generally
the only adverse effects are to the transmission rate; abor-
ted connections and data losses are rare.
In the 2.4-GHz frequency range the European regulation au-
thorities have designated 13 channels for WLAN. One chan-
nel has a bandwidth of 20 MHz.
A channel can have a bandwidth of 20 MHz (throughput up
to 130 Mbit/s) or 40 MHz (throughput of up to 300 Mbit/s).
Channels located directly next to each other may overlap
and result in mutual interference. For instance, if several
WLANs are operated close to each other in the 2.4-GHz fre-
quency range with a bandwidth of 20 MHz, a distance of at
least five channels should be left empty between each two
channels used. This means that if channel 1 is selected for
one WLAN, the channels 6 through 13 can be selected for a
second WLAN. This maintains the minimum distance be-
tween channels.
WLAN
Autochannel
With the WLAN Autochannel function, the FRITZ!Box auto-
matically searches for the channel subject to the least inter-
ference. Should problems with interference persist despite
this function, try to identify the source of interference and
switch it off manually.
Additional tips on interference in the WLAN radio network
are presented in the section “Ruling Out Interference
Caused by Other Wireless Networks” from page 101.
5-GHz Frequency
Band
The FRITZ!Box can operate in the 5-GHz frequency band as
an alternative. This frequency range is used much less of-
ten than the most common 2.4-GHz frequency range.
FRITZ!Box Fon WLAN 7570 vDSL 126
Frequency Ranges
In the 5-GHz frequency band, your FRITZ!Box occasionally
may change channels unexpectedly due to DFS (Dynamic
Frequency Selection) if a “higher privileged user” simulta-
neously claims the selected channel. This can happen es-
pecially when military or civilian radar is used in the imme-
diate vicinity.
A prerequisite for use of the 5-GHz frequency band is that
all WLAN adapters in the network support this frequency
range in accordance with the IEEE 802.11a or IEEE 8002.11n
standard.
2.4 GHz or 5 GHz The FRITZ!Box works in the WLAN network either in the 2.4-
GHz range or in the 5-GHz range, but not parallel in both fre-
quency ranges at the same time.
Bandwidth In both frequency ranges you can select between channel
bandwidths of 20 MHZ or 40 MHz (exception: channel 140
in the 5-GHz frequency band). The FRITZ!Box initially at-
tempts to select a channel with 40 MHz bandwidth
(throughput up to 300 Mbit/s). If this is not possible due to
interference or channels already being used by other
WLANs in the vicinity, the FRITZ!Box automatically switches
over to a channel with 20 MHz bandwidth. Greater band-
width provides for higher data throughput:
Increasing bandwidths also increases the probability of in-
terference by wireless networks in the vicinity. Large band-
widths reduce the frequency range available to other wire-
less networks in the vicinity.
Bandwidth (MHz) Maximum Data Throughput (Mbit/s)
20 130
40 300
Frequency Ranges
FRITZ!Box Fon WLAN 7570 vDSL 127
Allocation of the WLAN channels in the 2.4-GHz range:
Allocation of the WLAN channels in the 5-GHz range:
Channel Frequency (MHz) Channel Frequency (MHz)
1 2412 8 2447
2 2417 9 2452
3 2422 10 2457
4 2427 11 2462
52432 122467
6 2437 13 2472
7 2442
Channel Frequency (GHz) Channel Frequency (GHz)
36 5.180 108 5.540
40 5.200 112 5.560
44 5.220 116 5.580
48 5.240 120 5.600
52 5.260 124 5.620
56 5.280 128 5.640
60 5.300 132 5.660
64 5.320 136 5.680
100 5.500 140 5.700 (20 MHz band-
width only)
104 5.520
FRITZ!Box Fon WLAN 7570 vDSL 128
More about Network Settings
3 More about Network Settings
FRITZ!Box and Networks
The FRITZ!Box is delivered with preconfigured network settings. Accord-
ing to these settings, all computers connected with the FRITZ!Box are lo-
cated in the same subnetwork.
You can change any of these preconfigured settings, but
should only do so if you are well versed in networking tech-
nology.
The Glossary (see the chapter “Glossary” from
page 142) explains concepts and terminology having
to do with IP networks.
The sections “IP Address” on page 129, “DHCP Server”
on page 131 and “Subnetwork” on page 133 explain
when it may make sense to change the preconfigured
network settings, what the effects of these changes
are, and how to make the changes.
Upon delivery, the network settings of the FRITZ!Box are
preconfigured as follows:
If you do not have much experience in setting up networks,
please read this chapter in full.
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
IP Address
FRITZ!Box Fon WLAN 7570 vDSL 129
3.1 IP Address
The FRITZ!Box is delivered with an IP address preset.
The IP address and the corresponding subnet mask auto-
matically yield the following values:
You can change the preset IP address.
When Does It Make Sense to Change the IP Address?
Circumstances You should change the IP address of the FRITZ!Box if the fol-
lowing apply to your network:
You have an existing local IP network, one subnet with
several computers.
Fixed IP addresses are registered in the network set-
tings of the computer, and you do not want to or are
not permitted to change these addresses.
You want to connect the FRITZ!Box to the subnet in or-
der to make the FRITZ!Box features available to all of
the computers in the subnet.
IP Address What IP address must you assign for the FRITZ!Box and
what else must be taken into consideration?
The IP address must come from the address range of
your existing subnet.
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
Network address of the subnet 192.168.178.0
Entire IP address pool for the
computers
192.168.178.2 -
192.168.178.253
FRITZ!Box Fon WLAN 7570 vDSL 130
Reserved IP Addresses
The subnet mask must correspond with that of the
connected subnet.
When the DHCP server of the FRITZ!Box is enabled, the
addresses 20 through 200 in the fourth group of nu-
merals of the IP address are reserved for the DHCP
server. If none of the computers in your network has
an address from this pool, the DHCP server can remain
switched on. If one of the computers has a fixed ad-
dress assigned from this pool, you should switch off
the DHCP server.
If you can no longer open the FRITZ!Box user interface
after entering the IP address, see the information in
the section “Errors Opening the User Interface” from
page 91.
Reserved IP Addresses
The following address range is reserved in FRITZ!Box for in-
ternal purposes.
192.168.180.1 - 192.168.180.254
IP addresses from this range may not be assigned to
FRITZ!Box.
How Can the IP Address Be Changed?
1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings / System” menu in the
“Settings” area.
4. Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.
5. Open the “System / Network Settings” menu.
6. Click the “IP Addresses” button.
7. Make the changes on the “IP Settings” page and then
click “Apply”.
DHCP Server
FRITZ!Box Fon WLAN 7570 vDSL 131
3.2 DHCP Server
The FRITZ!Box is equipped with its own DHCP server. The
DHCP server is enabled by default in the factory settings.
Every time the operating system on a computer connected
with FRITZ!Box is started, it is assigned an IP address by the
DHCP server.
The IP address, the corresponding subnet mask and the ac-
tivated DHCP server automatically yield the following val-
ues:
In every subnet of the FRITZ!Box, the addresses 20 through
200 in the fourth group of numerals of the IP address are
reserved for the DHCP server.
Assigning the IP addresses via the DHCP server ensures
that all of the computers connected with the FRITZ!Box are
located in a single subnet.
Only one DHCP server may be active within any network.
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
Network address of the subnet 192.168.178.0
Entire IP address pool for the com-
puters
192.168.178.2 -
192.168.178.253
Address pool of the DHCP server 192.168.178.20 - 200
FRITZ!Box Fon WLAN 7570 vDSL 132
Fixed IP Addresses when the DHCP Server Is Enabled
Fixed IP Addresses when the DHCP Server Is Enabled
If you would like to give fixed IP addresses to individual
computers connected with the FRITZ!Box, despite the fact
that the DHCP server is enabled, then you must disable the
option “Obtain an IP address automatically” in this com-
puter’s network settings and enter the fixed IP address
manually in the appropriate fields.
Which IP Addresses Can You Assign to the Computers?
The IP addresses must be from the same subnet as
FRITZ!Box.
The IP addresses may not come from the address pool
of the DHCP server.
If the factory settings are not changed, that means the fol-
lowing IP addresses are available:
Each IP address can be assigned only once.
Disabling the DHCP Server
You can switch off the DHCP server.
To make sure that all computers remain in the same subnet
as the FRITZ!Box even when the DHCP server is disabled,
you must enter the IP addresses manually in the comput-
er’s network settings. First disable the option “Obtain an IP
address automatically” and then enter the IP address man-
ually in the appropriate field.
The computers can receive their IP addresses from the
DHCP server only if the setting “Obtain an IP address auto-
matically” is enabled in the their IP settings. For more infor-
mation, see the section “IP Settings” from page 102.
192.168.178.2 - 192.168.178.19
192,168,178,201 - 192.168.178.253
Changing the DHCP Server Settings
FRITZ!Box Fon WLAN 7570 vDSL 133
In the case of the preset IP address of the FRITZ!Box, the fol-
lowing IP addresses are available for assignment to the
computers:
Each IP address can be assigned only once.
Changing the DHCP Server Settings
Proceed as follows to open the DHCP server settings:
1. Start a web browser on your computer.
2. Enter fritz.box
in the address line of the browser.
3. Select the “Advanced Settings / System” menu in the
“Settings” area.
4. Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.
5. Open the “System / Network Settings” menu.
6. Click the “IP Addresses” button.
The “IP Settings” page is opened. Here you can make the
settings for the DHCP server.
3.3 Subnetwork
By default the option “All computers are located in the
same IP network” is enabled in the FRITZ!Box.
If the factory settings were not changed, this setting has the
following effect:
192.168.178.2 - 192.168.178.253
Factory Settings
All computers are located in the
same IP network
enabled
IP address 192.168.178.1
Subnet mask 255.255.255.0
DHCP server enabled
FRITZ!Box Fon WLAN 7570 vDSL 134
Disabling “All computers are located in the same IP network”
The DHCP server of the FRITZ!Box assigns all of the comput-
ers connected with the FRITZ!Box an IP address from the ad-
dress pool of the DHCP server.
This means that all of the computers connected with the
FRITZ!Box are located in the same subnet.
Disabling “All computers are located in the same IP
network”
If you switch off the setting “All computers are located in
the same IP network”, the interfaces of the FRITZ!Box will
receive their own IP addresses.
Factory Settings Upon delivery the interfaces of the FRITZ!Box are configured
as follows:
Thus the following address pools are available to the DHCP
server:
Computers connected with the FRITZ!Box via different inter-
faces are located in different subnets.
Address pool of the DHCP server 192.168.178.20 - 200
Interface IP Address Subnet Mask DHCP Server
LAN 1 192.168.178.1 255.255.255.0 enabled
LAN 2 like LAN 1 255.255.255.0 enabled
LAN 3 like LAN 1 255.255.255.0 enabled
LAN 4 like LAN 1 255.255.255.0 enabled
WLAN 192.168.182.1 255.255.255.0 enabled
Interface Address Pool of the DHCP Server at the Interface
LAN 1 192.168.178.20 - 200
LAN 2 192.168.178.20 - 200
LAN 3 192.168.178.20 - 200
LAN 4 192.168.178.20 - 200
WLAN 192.168.182.20 - 200
Disabling “All computers are located in the same IP network”
FRITZ!Box Fon WLAN 7570 vDSL 135
Deactivating Proceed as follows to disable the setting “All computers are
located in the same IP network”:
1. Open your a web browser on your computer and enter
fritz.box
in the address line of the browser.
2. Select the “Advanced Settings / System” menu in the
“Settings” area.
3. Click “Expert Mode” in the “System” menu, enable the
setting “Show expert settings” and confirm this set-
ting by clicking “Apply”.
4. Open the “System / Network Settings” menu.
5. Click the “IP Addresses” button.
The “IP Settings” page is opened. Here you can change the
setting “All computers are located in the same IP network”.
Interface Network Address of the Subnet
LAN 1 192.168.178.0
LAN 2 like LAN 1
LAN 3 like LAN 1
LAN 4 like LAN 1
WLAN 192.168.182.0
FRITZ!Box Fon WLAN 7570 vDSL 136
More about Internet Telephony
4 More about Internet Telephony
Voice over IP (VoIP)
Internet telephony has already been in use for years, but to-
day it allows even private customers the convenience famil-
iar from conventional telephony, usually at significantly
lower prices.
Internet telephony has also made it considerably more con-
venient to use applications like conference calls and an-
swering machines in networks. Further advantages include
global availability at a single telephone number, and the
development of new standards for security and voice quali-
ty.
File Transfer All kinds of data transmission in the Internet use the Inter-
net Protocol (IP). IP is packet-oriented. This means that the
data are broken down into data packets for transmission
and IP takes care of the transport of the individual data
packets through the Internet. Language is also transmitted
in the Internet in this manner.
In opposition to this, fixed-line telephony transmits data in
a line-oriented manner. In this case data are transmitted in
a coherent data stream.
4.1 Telephony Scenarios
If you have configured both a fixed-line number and an In-
ternet number in FRITZ!Box, you can make calls in all direc-
tions:
from the fixed-line network into the fixed-line network
from the Internet into the fixed-line network
from the Internet into the Internet
and receive calls from all directions as well.
Bandwidth Management
FRITZ!Box Fon WLAN 7570 vDSL 137
4.2 Bandwidth Management
The FRITZ!Box is equipped with integrated bandwidth man-
agement. This function ensures that the speech quality
during telephone calls over the Internet is not reduced by
surfing activity. To do this, the FRITZ!Box adjusts all up-
loads and downloads to the currently available bandwidth.
Because the FRITZ!Box also places a higher priority on Inter-
net telephony connections over Internet data connections,
unwelcome interference is largely avoided. Just as for any
other analog call, once Internet telephony transmission ca-
pacity has been reached, remote partners receive a busy
signal.
FRITZ!Box Fon WLAN 7570 vDSL 138
Customer Service Guide
5 Customer Service Guide
Help on All Important Service Topics
AVM is there to help should any questions or problems arise. Here you
will find the important information you need, in the form of manuals, up-
dates and support.
MS Service Pack In many cases problems which arise during operation can
be resolved by installing the current Microsoft Service Pack
for your operating system.
The current service packs can be obtained free of charge
from Microsoft at the address:
www.microsoft.com
5.1 Documentation
To take advantage of all commands and features of your
FRITZ!Box Fon WLAN 7570 vDSL, consult the following docu-
mentation:
Help In the FRITZ!Box user interface you can open the detailed
Help by clicking the “Help” buttons.
Readme The Readme file contains current information which was
not yet available at the time the manual was completed.
The Readme file is included on the FRITZ!Box CD.
Manual The manual of the FRITZ!Box Fon WLAN 7570 vDSL is includ-
ed in PDF format in the “Info” folder on the FRITZ!Box CD.
You can install the Adobe Acrobat reader to view PDF docu-
ments from the “Info” folder of the FRITZ!Box CD.
Information in the Internet
FRITZ!Box Fon WLAN 7570 vDSL 139
5.2 Information in the Internet
On its web site AVM presents comprehensive information
on your AVM products as well as new product announce-
ments and new product versions.
Frequently Asked Questions (FAQs)
We would like to make our products as easy to use as pos-
sible. If you still have problems, sometimes a little tip is all
you need to resolve them. That is why we present you with
a selection of frequently asked questions.
The FAQs can be viewed at the following address:
www.avm.de/en/service/FAQs
5.3 Updates and Software
AVM provides firmware updates and various software for
the FRITZ!Box Fon WLAN 7570 vDSL for free downloading
over the Internet.
Firmware Use the “Firmware Update” Wizard on the FRITZ!Box user
interface to perform an update of your firmware.
In the “Settings” area, open the “Wizards / Firmware Up-
date” command to download the firmware from the Internet
and perform the update with a single mouse click.
Programs The “Software” menu in the “Settings” area shows all of
the software for your FRITZ!Box available for downloading
from the Internet.
The latest software is also available for download at the fol-
lowing address:
www.avm.de/en/download
FTP Experienced users can also download updates from the
AVM FTP server. Click the “FTP Server” link in the download
area, or enter the following address:
ftp.avm.de
FRITZ!Box Fon WLAN 7570 vDSL 140
Support from the AVM Service Team
5.4 Support from the AVM Service Team
Should problems with your FRITZ!Box arise, we recommend
taking the following steps:
1. If you have questions about starting operation of your
FRITZ!Box, please consult the chapter “Connecting
from page 13.
2. Please see the information in the section “Product De-
tails” on page 114.
3. If you have any problems, seek “first aid” by consult-
ing the chapter “Troubleshooting” from page 91.
This chapter also presents useful tips on problems wi-
th establishing connections.
4. The next step is to consult the FAQs in the Internet:
www.avm.de/en/service/FAQs
This site contains answers to questions our customers
have frequently asked our Support team.
5. If you do not find the answer you need in the FAQs,
AVM Support will assist you. The support desk can be
reached by e-mail or by fax.
Support by e-mail
You can send us an e-mail request at any time using the
Service area of our website. The Service area can be
reached at:
www.avm.de/en/service
From the Support area, select the product, your operating
system, and the topic for which you need support. Click the
“Mail Form” link to open the e-mail support form. Fill out
the form and send it to AVM by clicking the “Send” button.
Our Support team will respond by e-mail as quickly as pos-
sible.
Please take advantage of the information sources de-
scribed above before contacting AVM support.
Support by Fax
FRITZ!Box Fon WLAN 7570 vDSL 141
Support by Fax
If necessary, you can reach AVM Support at the fax number:
+49 (0)30 / 39 97 62 66
The following information should be included in your fax to
the Support team:
Your name and address.
An e-mail address or fax number at which you can be
reached.
the serial number of the FRITZ!Box
The serial number is printed on the sticker attached to
the base of the device. Support staff will always check
this number to ensure that you are a registered user.
Which operating system are you using (e.g.,
Windows Vista or Windows XP)?
How is the FRITZ!Box connected to your computer, wi-
th a network cable or via WLAN?
At what step of the installation or in which application
does an error occur or an error message appear? What
is the exact wording of the message?
Which firmware does FRITZ!Box use? The firmware ver-
sion is displayed on the “Overview” page of the
FRITZ!Box user interface.
Once you have put together this information, please fax it
to AVM Support. The Support team will assist you in resolv-
ing your problem.
FRITZ!Box Fon WLAN 7570 vDSL 142
Glossary
6Glossary
ADSL abbreviation for Asymmetric Digital Subscriber Line
Designates a fast kind of file transfer that works with stan-
dard copper cables and transports signals in both direc-
tions at different speeds (upstream at 640 Kbit/s and
downstream at up to 9 Mbit/s).
ADSL2 abbreviation for Asymmetric Digital Subscriber Line 2
ADSL 2 (G.992.3) is a further development of the ADSL norm
(G.992.1/G.992.2).
ADSL2 offers range much greater than did the first ADSL
generation, and is significantly more robust than ADSL, as
it can simply switch off interference from single carrier fre-
quencies. This feature allows ADSL2 to prevent synchroni-
zation losses.
With a throughput rate of up to 12Mbit/s downstream,
ADSL2 offers considerably greater bandwidth than ADSL.
ADSL2 is completely downward compatible, meaning that
terminal equipment compliant with ADSL can also be oper-
ated on ADSL2 lines, although the devices cannot exploit
the advantages of ADSL2.
ADSL2+ abbreviation for extended bandwidth Asymmetric Digital
Subscriber Line 2
ADSL2+ (G.992.5) is a further development of the ADSL
norm (G.992.1/ G.992.2).
ADSL2+ offers a doubled frequency range used for down-
stream transmission, and thus double the maximum band-
width achievable for downstream to 24 Mbit/s.
ADSL2+ is completely downward compatible, meaning that
terminal equipment compliant with ADSL and ADSL2 can al-
so be operated on ADSL2+ lines, although the devices can-
not exploit the advantages of ADSL2+.
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 143
ADSL-Controller An ADSL-Controller is an electronic hardware assembly that
allows a computer to access an ADSL line. ADSL-Controllers
are stationary equipment, included on internal ADSL cards
(for the PCI bus) or in external ADSL modems (with USB or
Ethernet ports).
Alias Alias means different, else and also known as. An alias is
often a short, catchy substitute for a long, complicated
string of characters, for example, the actual name of the us-
er J.Smith@my-internetprovider.com in place of the string
030123456@my-internetprovider.com. Here the name
J.Smith functions as an alias for 030123456.
Context menu The context menu is a menu that is normally not visible.
The context menu opens only when you click a button, a
graphic or a word with the right mouse button. Depending
on where you clicked, the context menu contains only the
most common menu commands for the given object.
If you are using an Apple computer, click the “Ctrlwhile
clicking.
Default gateway see gateway
DHCP abbreviation for Dynamic Host Configuration Protocol
DHCP is a protocol for the dynamic negotiation of the oper-
ating parameters for the TCP/IP protocol (TCP is a transport
protocol based on the Internet protocol). The computers of
a local IP network (DHCP clients) access the DHCP server as
part of their operating systems’ start procedure.
The central administration of the TCP/IP operation parame-
ters makes it possible to avoid address conflicts caused by
IP addresses accidentally assigned more than once.
DHCP server The DHCP server assigns each client an IP address that is
not yet been assigned at the present time. The DHCP server
also informs the client of the IP addresses of the DNS serv-
er to be used and of the default gateway. In assigning the IP
addresses the DHCP server selects from a prescribed pool
of IP addresses.
FRITZ!Box Fon WLAN 7570 vDSL 144
Glossary
DNS abbreviation for Domain Name System
Domain Name Service takes care of determining the IP ad-
dress for a given domain name. Domain Name Service is
running on every computer. It accepts the domain name en-
tered by a user and inquires about the corresponding IP ad-
dress at a DNS server known to the service. If a DNS server
cannot answer the inquiry itself, it can inquire about the IP
address (DNS resolution) at other DNS servers.
If the Domain Name Service receives negative information
from the DNS server (domain name not known), it can send
inquiries to other DNS servers it knows or return a corre-
sponding error message to the user. If it receives the de-
sired IP address instead, the application can use the IP ad-
dress to retrieve the destination desired by the user.
This hierarchical system of DNS servers is known as the Do-
main Name System. The addresses of the DNS servers at
which the Domain Name Service is to inquire by default
generally are handed over to the computer by the Internet
Service Provider automatically whenever a connection to
the Internet is established. In local networks addresses can
also be assigned via DHCP. Otherwise they must be entered
manually in the TCP/IP configuration of the PC by the user
or the system administrator.
DSL modem A DSL modem connects a computer to the Internet via the
DSL line. In contrast to the analog modem, a connection via
the DSL modem does not mean that the telephone line is
busy.
DSL router A combination of a DSL modem and a router is called a DSL
router.
Dynamic DNS abbreviation for Dynamic Domain Name System
Dynamic DNS is a service which allows a computer always
to be reached under the same domain name despite con-
stantly changing IP addresses. This means that even pri-
vate users have an economical way of placing their own In-
ternet offers on their computer at home.
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 145
It works by transmitting the current IP address to a special
DDNS server each time the IP address changes. Except for
the few seconds between the cancellation of the old IP ad-
dress and the notification of the new IP address, the com-
puter can always be reached at the selected domain name.
Dynamic IP
address
A dynamic IP address is an IP address valid only for the du-
ration of one Internet or network session.
Every computer participating in the Internet must have a
uniquely assigned public IP address. Since only a limited
number of such IP addresses is available, they must be
used sparingly. That is why most of the Internet partici-
pants who dial in to the Internet receive a dynamic IP ad-
dress. They are called dynamic because every participant
receives a new public address that has not been assigned
yet each time he or she dials in to the Internet.
By contrast, dynamic addresses are usually used in local IP
networks because they are easy to handle, and because
using them avoids incorrect IP address entries or uninten-
tional double assignments. The DHCP service is responsi-
ble for assigning unique dynamic IP addresses.
FAQ abbreviation for Frequently Asked Questions
FAQs are collections with answers to frequently asked
questions on a certain subject area.
Firewall A firewall protects a computer or local network against at-
tacks from the Internet.
Most firewalls work with packet filters, which merely check
the IP addresses and port numbers of incoming and out-
going data packets and filter the packets according to pre-
scribed rules.
Some firewalls also integrate additional concepts like IP
masquerading and NAT to decouple data traffic by distin-
guishing strictly between the internal and external network.
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 147
If all packets that cannot be delivered in a local network al-
ways are to be transmitted to their given recipients via the
same gateway, for this purpose the address of the gateway
must be saved as the default gateway in the network con-
figuration of the computer.
Such a default gateway for the computer is negotiated auto-
matically by the operating system or the dialing software
whenever an ISDN-Controller or DSL-Controller establishes
a connection to the Internet. If a router is used for the
shared Internet access in a local network, the IP address of
the router must be entered as the default gateway in the
TCP/IP configuration of each computer that wishes to use
the Internet connection. If the TCP/IP configuration is per-
formed by means of a DHCP server, there is no need to en-
ter the gateway address manually.
IP abbreviation for Internet Protocol
The IP Internet Protocol is the most important basic proto-
col for the control of data exchange in local networks and in
the Internet. The Internet protocol works without a connec-
tion; in other words, data packets are transmitted from the
sender to the recipient without previous consultation. The
addresses of the recipient and the sender in the data pack-
ets are given as IP addresses.
IP address abbreviation for Internet Protocol address
In IP-based networks, for instance in the Internet and local
networks, all connected devices are addressed via their IP
addresses. So that data packets are sure to be delivered to
the right address, each IP address may be assigned only
once within the Internet or a local IP network.
The IP address consists of four three-digit groups of num-
bers (for instance, 192.168.178.247). Each group of num-
bers can assume values between 000 and 255.
Every IP address contains two components: the network ad-
dress and the host address. These two components can be
read out of an IP address only if the subnet mask is also
specified.
FRITZ!Box Fon WLAN 7570 vDSL 148
Glossary
IP addresses can be public or private, and also fixed or as-
signed dynamically. See the corresponding entries in the
glossary for more information.
IP addressing Addressing is one of the main functions of the Internet Pro-
tocol (IP). Internet addresses can be written in decimal, oc-
tal or hexadecimal notation. The FRITZ!Box uses “dotted-
decimal” notation: The four bytes of an address are repre-
sented by decimal numbers separated by dots. The total
volume of Internet addresses, the address space, is sepa-
rated into classes (A, B, C, D, and E). The full set of IP ad-
dresses, called the address space, is grouped into address
classes designated as A, B, C, D and E. Only the first three
of these five address classes are actually used. These
classes can be described as follows:
Properties of IP Address Classes
Every IP address consists of two parts: the network address
and the host address. The sizes of the network address and
the host address are variable, and determined by the first
four bits (of the first byte) of the IP address.
IP masquerading By means of IP masquerading a computer or LAN can be
protected from unauthorized connection request from the
Internet. Masquerading works by converting the IP address-
es used in a network to one public IP address. From the out-
side it appears that all requests are sent from a single com-
puter.
Classes Properties Network Address,
Decimal Value
Class A ad-
dress
Few networks, many hubs 0-127
Class B ad-
dress
Intermediate distribution of
networks and hubs
128-191
Class C ad-
dress
Many networks, few hubs 192-223
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 149
IP network A network in which data exchange takes place on the basis
of the Internet Protocol is called an IP network.
Port So that a single network connection on a connection can be
used by multiple applications to exchange data with re-
mote sites at the same time, a computer administers what
are known as ports for the IP-based protocols TCP and UDP.
Ports substantiate the point of access for the data packets
delivered via the IP Internet protocol. While the IP address
determines the destination computer quite generally, the
port addresses the communication interface provided by
an application for a certain communication procedure.
The Internet protocol allots 16 bits for the specification of
the port number. Thus a total of 65,535 different port num-
bers can be specified. Ports up to port number 1,024 are re-
served for special system applications and typical Internet
applications. These include, for instance, the port numbers
21 for FTP (File Transfer Protocol), 25 for SMTP (Simple Mail
Transfer Protocol), 53 for DNS (Domain Name Service) and
80 for HTTP (Hypertext Transfer Protocol).
Ports are primarily of interest to users for their role in pro-
tecting an Internet connection from external attacks. Most
firewalls offer the possibility of preventing data traffic on
certain ports. This means that certain port numbers can be
blocked to prevent data from being delivered to system ser-
vices. This is also a way of preventing any Trojans (mali-
cious applications opening backdoors on a computer) that
may have infected your computer from receiving data on
ports it created as means of accessing your computer for
potentially damaging activities. A firewall blocks most atyp-
ical port numbers not required for normal operation of an
application and offers specialized users the opportunity to
forward specified ports.
Port forwarding With port forwarding it is possible to specify ports that will
allow all incoming or outgoing data packets to pass through
a router or firewall.
If a computer from the local network offers server services,
for instance, the configuration of a router using NAT or IP
masquerading must forward the port used by the server
FRITZ!Box Fon WLAN 7570 vDSL 150
Glossary
service for access to incoming data packets and thus keep
it open permanently. The private IP address of the given
computer must be saved as the destination address for all
of the packets arriving at the port.
Typical server applications which require port forwarding
are FTP and Web servers. To allow access to a computer via
remote management software like Symantec’s pcAnywhere
or Microsoft’s Remote Desktop, or even use of a file-sharing
program like eDonkey, the required ports must be released
for port forwarding. Port forwarding settings for the most
important application cases are quite simple as long as the
settings of the router or the firewall already contain rules
with a corresponding preconfiguration.
Private IP
address
Private IP addresses are used for computers and other net-
work devices within local IP networks.
Since many local IP networks are not connected to the In-
ternet except via single computers or routers (gateway), cer-
tain address ranges are excluded from the publicly availa-
ble IP addresses so that they are available for assignment
in local IP networks. An IP address may only be assigned
once within the local network. A private IP address may ex-
ist in any number of other local networks.
Public IP
address
A public IP address is an IP address valid in the Internet. Ev-
ery computer or router participating in the Internet must
have a uniquely assigned public IP address. This address is
usually negotiated dynamically with the Internet Service
Provider when a connection to the Internet is dialed. The In-
ternet Service Provider assigns the negotiated IP address to
the computer or router for the duration of an Internet ses-
sion.
Subnetwork A local IP network can consist of one subnetwork or be di-
vided into multiple subnetworks. The division into subnet-
works is performed when the local IP network is configured.
The subnetworks of a local IP network are also IP networks.
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 151
Subnet mask The subnet mask indicates which part of an IP address is
the network address and which the address of the comput-
er. The network address defines what is called the subnet.
Example 1
IP address: 192.168.178.247
Subnet mask: 255.255.255.0
The assignment of the first three groups of numerals in the sub-
net mask indicates that the first three groups of numerals in the
IP address define the network. The following addresses result:
Network address of the subnet: 192.168.178.0
Address of the computer in the
subnet:
192.168.178.247
IP address pool in the subnet: 192.168.178.0 -
192.168.178.255
The IP addresses 192.168.178.0
and 192.168.178.255 are reser-
ved. This means that the ad-
dresses from 192.168.178.1 to
192.168.178.254 are available
for assignment to the comput-
ers.
Example 2
IP address: 192.,168.178.247
Subnet mask: 255.255.0.0
The assignment of the first two groups of numerals in the subnet
mask indicates that the first two groups of numerals in the IP ad-
dress define the network. The following addresses result:
FRITZ!Box Fon WLAN 7570 vDSL 152
Glossary
TCP/IP abbreviation for Transmission Control Protocol / Internet
Protocol
TCP/IP is the “language” of the Internet. TCP/IP is used to
refer to a suite of protocols used for data communication
over the Internet. TCP and IP are the network and transport
protocols underlying most Internet services, including file
transfer (FTP) and e-mail communication (SMTP). TCP/IP is
available for practically all computer systems. TCP/IP thus
offers the advantage of trouble-free communication be-
tween otherwise incompatible networks and systems.
TR-069 T-069 is an HTTP-based protocol for communication be-
tween CPE (Customer Premises Equipment) and an Auto
Configuration Server (ACS) belonging to the Internet Ser-
vice Provider. The TR-069 protocol is also known under the
alternative name CPE WAN Management Protocol (CWMP).
It offers the possibility of secure automatic configuration of
the terminal device and thus, most importantly, facilitates
simple initial configuration of the ADSL terminal equipment
by the end customer.
The TR-069 protocol can be used for automatic configura-
tion only if it is actively supported by the given terminal de-
vice. For this an Auto Configuration Client (ACC) must be in-
tegrated in the device. The specifications for automatic
configuration of the ADSL terminal device are stored on the
Auto Configuration Server by the given Internet Service
Network address of the subnet: 192.168.0.0
Address of the computer in the
subnet:
192,168,178,247
IP address pool in the subnet: 192.168.0.0 - 192,168,255,255
The IP addresses 192.168.0.0
and 192.168.255.255 are reser-
ved. This means that the ad-
dresses from 192.168.0.1 to
192.168.255.254 are available
for assignment to the comput-
ers.
Example 2
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 153
Provider. The process of automatic configuration via TR-069
is initiated by the ADSL terminal device. First the user en-
ters a security key and then the settings are retrieved from
the Auto Configuration Server and implemented in the AD-
SL terminal device without any further interaction with the
user. During this process all of the communication between
the ADSL terminal device and the Auto Configuration Server
takes place in encrypted form.
Traffic shaping Traffic shaping is a technology for the optimization of ca-
pacity loads in a communication connection. Especially for
asymmetrical DSL connections, using traffic shaping can
prevent that a download is delayed or blocked by high up-
load traffic.
Data transfer in the Internet is generally based on the
TCP/IP protocol, which waits for the remote site to confirm
reception after sending one or more data packets. Addition-
al data packets are not sent until this confirmation of recep-
tion arrives. If no confirmation arrives over a longer period
of time, the non-confirmed data packets are transmitted
again. The dispatch of such a confirmation can be delayed,
for instance, because the bandwidth for transfer (upload) is
already being used by the data packets of other applica-
tions. But since the remote site does not signal the recep-
tion of the expected confirmation packets until after they
have arrived, this could cause noticeable delays in render-
ing a requested web site or a drop in the throughput rate of
a download. In the worst-case scenario, the remote site will
abort transmission after several apparently unsuccessful
attempts to transfer the data packets. Typical causes for
such a blockade situation include sending an e-mail mes-
sage or the use of a program for private data exchange (also
known as file sharing or peer-to-peer software).
Through traffic shaping these delays are avoided by provid-
ing the dispatch of confirmation packets with bandwidth
suitable for the given download activities. All of the packets
to be sent are also assigned a priority suitable for their
packet types.
FRITZ!Box Fon WLAN 7570 vDSL 154
Glossary
Update A more recent version of software or firmware is called an
update. Updates are often free of charge, resolve minor
programming errors, and sometimes also offer new func-
tions.
Upload This term designates the procedure of transmitting files
from one’s own computer to another computer in the Inter-
net.
UPnP abbreviation for Universal Plug and Play (UPnP)
UPnP is an extension of the Microsoft Plug & Play standard
that allows devices to network globally and to exchange
services—without a central server or computer.
UPnP allows devices from all kinds of manufacturers (ster-
eo systems, routers, printers, house controls) to be con-
trolled via an IP-based network, with or without central con-
trol through a gateway. It is based on a number of standard-
ized network protocols and data formats. Expressed sim-
plistically, devices can communicate with each other using
UPnP to exchange information.
Today the UPnP forum specifies the UPnP standard and cer-
tifies devices that are compliant with the standard.
VoIP abbreviation for Voice over IP, also known as Internet tele-
phony
Voice over IP makes telephone calls possible via the Inter-
net. The technology has already been in use for years, but
today it allows even private customers the convenience fa-
miliar from conventional telephony, usually at significantly
lower prices. VoIP has also made it considerably more con-
venient to use applications like conference calls and an-
swering machines in networks. Added to this are global ac-
cessibility under a single telephone number and new VoIP
features like the Buddy List known from chat rooms.
Internet telephony used to be possible only with a headset
connected to the computers of the callers and their conver-
sation partners. Today voice connections via the Internet,
even to fixed-line and mobile networks, can be conducted
conveniently using VoIP telephone systems that allow
Glossary
FRITZ!Box Fon WLAN 7570 vDSL 155
already existing analog telephones to be used even when
the computer is switched off. Various Internet Service Pro-
viders and telephony carriers provide SIP fixed-line gate-
ways for this purpose. Such a gateway is used to produce
voice connections between the Internet and conventional
telephone networks. In principle VoIP conversations are
possible via every DSL line, but for convenient use with ex-
isting terminal equipment, and for conversations with the
fixed-line and mobile networks, it is important that the DSL
provider support what is known as the SIP standard. SIP is
the current standard defined for VoIP by the IETF (Internet
Engineering Task Force).
WLAN abbreviation for Wireless LAN, or Wireless Local Area Net-
work
The term WLAN designates the industry standard for wire-
less local networks passed by the Institute of Electrical and
Electronics Engineers (IEEE) in 1997 under the title
IEEE 802.11.
By means of WLAN technology, individual computers or net-
work devices like printers or DSL access points can be
linked wirelessly to an existing cable-connected local
network (LAN), or LANs can be converted completely to a
wireless structure. A further useful purpose for WLAN tech-
nology is to link segments of existing cable-connected net-
works.
Although WLAN was actually developed only for short-
range connections, by cascading WLAN access points or
implementing transmission networks with high-power
point-to-point radio transmission, even network segments
located further from each other can be linked or network
participants in relatively remote locations can be economi-
cally and easily integrated into an existing network.
WLAN access points often also serve as access points to
the Internet in private or public institutions. Many airports,
hotels and cafes, for instance, make WLAN hotspots availa-
ble to their customers, either free or subject to a charge. Ul-
timately this has maneuvered WLAN into serious competi-
tion with mobile UMTS technology.
FRITZ!Box Fon WLAN 7570 vDSL 156
Glossary
The application possibilities for wireless network communi-
cation also overlap with Bluetooth technology. For mobile
devices with very low power consumption Bluetooth is the
more useful solution, however, as Bluetooth uses consider-
ably less power than wireless LAN. What is more, Bluetooth
technology is more flexible and thus offers a greater band-
width of potential applications.
Index
FRITZ!Box Fon WLAN 7570 vDSL 157
Index
A
alarm . . . . . . . . . . . . . . . . . . . . . . 40, 60
alternating between calls . . . . . . . . . . 82
analog telephone line . . . . . . . . . . . . . 25
analog terminal equipment . . . . . . . . 26
answering machine . . . . . . . . . . . . . . . 40
answering machine integrated . . . . . . 40
asterisk key . . . . . . . . . . . . . . . . . . . . .111
B
bandwidth management. . . . . . . . . . 137
busy on busy . . . . . . . . . . . . . . . . . . . . 75
bytes. . . . . . . . . . . . . . . . . . . . . . . . . . .111
C
call blocking. . . . . . . . . . . . . . . . . . . . . 39
Call List. . . . . . . . . . . . . . . . . . . . . . . . . 38
call rejection . . . . . . . . . . . . . . . . . . . . 75
call waiting. . . . . . . . . . . . . . . . . . 70
, 79
CLIP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
CLIR . . . . . . . . . . . . . . . . . . . . . . . . . . . 71
collection point . . . . . . . . . . . . . . . . . 119
COLP . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
COLR. . . . . . . . . . . . . . . . . . . . . . . . . . . 72
computer
connecting. . . . . . . . . . . . . . . . . . . 17
configuring answering machine . . . . . 37
configuring Internet connections . . . . 30
configuring telephone connections . . 35
configuring the printer port. . . . . . . . . 50
connecting
analog fixed-line network . . . . . . .25
answering machine . . . . . . . . . . . 26
computer. . . . . . . . . . . . . . . . . . . . . 17
configuration for analog equipment26
fax machine . . . . . . . . . . . . . . . . . 26
ISDN telephones . . . . . . . . . . . . . .27
LAN . . . . . . . . . . . . . . . . . . . . . . . . .18
multiple computers . . . . . . . . . . . .19
network hub/switch . . . . . . . . . . . .19
network port . . . . . . . . . . . . . . . . . .18
telephone . . . . . . . . . . . . . . . . . . . 26
WLAN. . . . . . . . . . . . . . . . . . . . . . . 20
connecting a fax machine . . . . . . . . . 26
connecting a telephone . . . . . . . . . . . 26
connecting an answering machine . . 26
connecting ISDN PBX . . . . . . . . . . . . . 28
connecting to DSL. . . . . . . . . . . . . . . . .23
connecting to electrical power. . . . . . .16
connecting to ISDN. . . . . . . . . . . . . . . 24
consultation . . . . . . . . . . . . . . . . . . . . 84
conventions . . . . . . . . . . . . . . . . . . . . 110
copyright . . . . . . . . . . . . . . . . . . . . . . . . .2
cordless phone. . . . . . . . . . . . . . . . . . .32
customer service . . . . . . . . . . . . . . . .138
D
declaration of CE conformity . . . . . . . 118
declaration of conformity. . . . . . . . . . 118
DECT function . . . . . . . . . . . . . . . . . . . .32
defining connection type . . . . . . . 40
, 76
defining outgoing numbers . . . . . . . . .76
DHCP server . . . . . . . . . . . . . . . . . . . . 131
dialing rules . . . . . . . . . . . . . . . . . . . . 40
displaying the incoming caller ID (CLIP)72
displaying the number called . . . . . . .72
disposal . . . . . . . . . . . . . . . . . . . . . . . 119
Do Not Disturb . . . . . . . . . . . . . . . . . . .59
documentation . . . . . . . . . . . . . . . . . .138
DSL
connecting to . . . . . . . . . . . . . . . . .23
FRITZ!Box Fon WLAN 7570 vDSL 158
Index
E
ECT . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
electrical power
connecting to. . . . . . . . . . . . . . . . . 16
error search . . . . . . . . . . . . . . . . . . . . . 91
explicit call transfer . . . . . . . . . . . 85
, 87
F
factory settings . . . . . . . . . . . . . . . . . . 58
firmware update . . . . . . . . . . . . . . . . 139
FRITZ!WLAN USB Stick. . . . . . . . . 20
, 42
G
GAP. . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
H
handling. . . . . . . . . . . . . . . . . . . . . . . . . 7
handset signals . . . . . . . . . . . . . . . . . 113
help for errors . . . . . . . . . . . . . . .91, 138
hold . . . . . . . . . . . . . . . . . . . . . . . . . . . 84
hold or flash key . . . . . . . . . . . . . . . . .111
hub . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19
I
imprint . . . . . . . . . . . . . . . . . . . . . . . . . . 2
information in the Internet . . . . . . . . 139
installation
with CD. . . . . . . . . . . . . . . . . . . . . . 13
without CD . . . . . . . . . . . . . . . . . . . 14
installation prerequisites . . . . . . . . . . 12
integrated answering machine . . . . . . 41
Internet connections
configuring. . . . . . . . . . . . . . . . . . . 30
Internet telephony. . . . . . . . . . . . . . . 136
IP address . . . . . . . . . . . . . . . . . . . . . 102
ISDN
connecting to. . . . . . . . . . . . . . . . . 24
ISDN PBX
connecting . . . . . . . . . . . . . . . . . . . 28
ISDN telephones
connecting. . . . . . . . . . . . . . . . . . . 27
K
keypad sequences . . . . . . . . . . . . 57, 90
keys . . . . . . . . . . . . . . . . . . . . . . . . . . . 111
L
LEDs. . . . . . . . . . . . . . . . . . . . . . . . . . . 112
legal notice . . . . . . . . . . . . . . . . . . . . . . .2
logging off a cordless phone . . . . . . . .33
M
making internal calls . . . . . . . . . . . . . .76
mounting. . . . . . . . . . . . . . . . . . . . . . . . .7
mounting on a wall. . . . . . . . . . . . . . . . 15
N
network hub . . . . . . . . . . . . . . . . . . . . .19
network settings. . . . . . . . . . . . . . . . .128
network switch . . . . . . . . . . . . . . . . . . .19
new firmware . . . . . . . . . . . . . . . . . . .139
O
opening the user interface. . . . . . . . . 29
operation by telephone . . . . . . . . . . . .57
operation requirements . . . . . . . . . . . .12
overview . . . . . . . . . . . . . . . . . . . . . . . . .9
P
package contents . . . . . . . . . . . . . . . . . 11
picking up calls. . . . . . . . . . . . . . . . . . .78
pound key . . . . . . . . . . . . . . . . . . . . . . 111
printer driver installation
in SUSE Linux . . . . . . . . . . . . . . . . .52
in Windows Vista . . . . . . . . . . . . . .50
in Windows XP/2000 . . . . . . . . . . .51
on Apple computers. . . . . . . . . . . .53
product details . . . . . . . . . . . . . . . . . . 114
product overview . . . . . . . . . . . . . . . . . .9
Index
FRITZ!Box Fon WLAN 7570 vDSL 159
R
registering cordless phones . . . . . . . . 32
registering cordless phones by other man-
ufacturers . . . . . . . . . . . . . . . . . . . . . 32
rings . . . . . . . . . . . . . . . . . . . . . . . . . . 113
S
Samba . . . . . . . . . . . . . . . . . . . . . . . . . 47
security. . . . . . . . . . . . . . . . . . . . . . . . . . 7
serial number. . . . . . . . . . . . . . . . . . . 141
service team. . . . . . . . . . . . . . . . . . . . 140
shortening the dialing procedure. . . . 75
subnetwork . . . . . . . . . . . . . . . . . . . . 133
support
support by e-mail . . . . . . . . . . . . 140
support by fax . . . . . . . . . . . . . . . 141
suppressing call waiting . . . . . . . . . . . 70
switch . . . . . . . . . . . . . . . . . . . . . . . . . . 19
switching DECT function on and off . . 34
symbols . . . . . . . . . . . . . . . . . . . . . . . 110
T
technical specifications . . . . . . . . . . 116
Telephone Book. . . . . . . . . . . . . . . . . . 39
telephone connections
configuring. . . . . . . . . . . . . . . . . . . 35
three-party conference call . . . . . . . . . 83
transferring calls . . . . . . . . . . . . . . . . . 85
troubleshooting. . . . . . . . . . . . . . . . . . 91
U
uninstallation. . . . . . . . . . . . . . . . . . . 107
W
WEP security mechanism . . . . . . . . . .123
WLAN. . . . . . . . . . . . . . . . . . . . . . 20
, 120
enabling / disabling. . . . . . . 58
, 115
encryption. . . . . . . . . . . . . . . . . . .123
frequency range . . . . . . . . . . . . . .125
security . . . . . . . . . . . . . . . . . . . . .122
standards . . . . . . . . . . . . . . . . . . .122
using FRITZ!WLAN USB Stick . . . . 20
WLAN connection
other manufacturers . . . . . . . . . . .21
WLAN switch . . . . . . . . . . . . . . . . . . . . 115
WPA security mechanisms . . . . . . . . . 123
155

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln
1

Forum

avm-fritzbox-7570
  • hat die fritzbox 7570 eine sicherung und wo liegt sie Eingereicht am 17-8-2017 17:19

    Antworten Frage melden

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für AVM FRITZBox 7570 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von AVM FRITZBox 7570

AVM FRITZBox 7570 Kurzanleitung - Deutsch - 2 seiten

AVM FRITZBox 7570 Bedienungsanleitung - Deutsch - 189 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info