Bedienungsanleitung Axis 214 PTZ - Network Camera (Seite 13 von 53) (Englisch)

615957

Zoom out

Zoom in

Vorherige Seite

1/53

Nächste Seite

AXIS 214 PTZ

Other methods of accessing the video stream

Video/images from the AXIS 214 PTZ can also be accessed in the following ways:

• If supported by the client, the AXIS 214 PTZ can use Motion JPEG server

push to display video.

This option maintains an open HTTP connection to the browser and sends data as and when

required, for as long as required.

• As single JPEG images in a browser.

Enter e.g. the path: http://<IP address>/axis-cgi/jpg/image.cgi?resolution=CIF

• Windows Media Player. This requires AMC and the MPEG-4 decoder to be installed. The paths

that

can be used are listed below, in the order of preference.

• Unicast via RTP: axrtpu://<IP address>/mpeg4/media.amp

• Unicast

via RTSP:axrtsp://<IP address>/mpeg4/media.amp

• Unicast via RTSP, tunnelled via HTTP:

axrtsphttp://<IP address>/mpeg4/media.amp

• Unicast via RTSP, tunnelled via HTTPS:

axrtsphttps://<IP address>/mpeg4/media.amp

• Multicast: axrtpm://<IP address>/mpeg4/media.amp

Other MPEG-4 clients

Although it may be possible to use other clients to view the MPEG-4 stream, this is not guaranteed by Axis.

For some other clients, e.g. QuickTime™ the Video Object Type must be set to Simple. It may also be

necessary to adjust the advanced MPEG-4 settings. To assess the video stream from e.g. QuickTime™ the

following path can be used:

rtsp://<ip address>/mpeg4/media.amp

This path is for all supported methods, and the client will negotiate wi

th the AXIS 214 PTZ to determine

exactly which transport protocol to use.

Audio transmission methods

The audio stream can be accessed in the Live View page when viewing either Motion JPEG or MPEG.

Using Motion JPEG

The basic transmission method of audio used in conjunction

with Motion JPEG video streaming is

transmission over HTTP. The video and audio streams are not synchronized when using Motion JPEG so the

streams may be slightly out of sync. The latency in any stream should be low, but this will depend on the

network infrastructure.

Using MPEG-4

When using MPEG-4, audio is streamed using the same

protocol as the video stream.

When audio is transmitted using MPEG-4, the Axis product sends synchroni

zation information along with

the streams to the client performing the synchronization.

Audio is streamed from the client to the server over HTTP

when using both Motion JPEG and MPEG-4.

Accessing the Audio Streams

In addition to accessing audio in the Live View page using AMC, audio from the camera can also be

accessed in the following ways:

• HTTP-API - Read about accessing audio for the other

protocols through the HTTP-API at

http://www.axis.com/techsup

• QuickTime/Windows Media Player - these can be used to

listen to the audio stream using the same

methods as for accessing video streams.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis 214 PTZ - Network Camera Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info