Bedienungsanleitung Axis IP-Surveillance system (Seite 16 von 50) (Englisch)

460819

Zoom out

Zoom in

Vorherige Seite

1/50

Nächste Seite

> Audio support: A network camera with audio support comes either with a built-in microphone or

an input for an external microphone. Speakers may be built in or external. An audio feature

enables users to remotely listen in on an area and communicate instructions, orders or requests to

visitors or intruders. Audio can also be used as an independent detection method. When sound

above a certain level is detected, video recordings and alarms can be triggered.

Figure 2.1.q. Enhancing video surveillance with audio

Audio modes may be simplex (audio is sent either by the operator or the camera), half duplex

(audio is sent in both directions, but only one party at a time can send) or full duplex (audio is sent

to and from the operator simultaneously). Audio can be compressed and integrated into the video

stream, and sent over a network for monitoring and/or recording. There are four audio compres-

sion standards used in network video. They are AAC-LC, which requires a license, and G.711, G.726

and G.722.2 (Adaptive Multi-Rate—Wideband), which are non-licensed technologies. Audio and

video are two separate packet streams that are sent over a network. In order for the client or

player to perfectly synchronize the audio and video streams, the audio and video packets must be

time-stamped. Time stamping using Motion JPEG may not always be supported in a network

camera. If synchronized audio and video is a priority, it is better to use H.264 or MPEG-4 Part 2

for the video compression since time stamping is usually supported using those standards.

> Input and output (I/O) ports: Input/output connectors enable external devices to be connected

to a network camera. Inputs to a camera (e.g. a door contact, infrared motion detector, glass break

sensor or shock sensor) enable the camera to react to an external event by, for example, initiating

the sending and recording of video. Outputs enable the camera to control external devices such as

activating alarms, triggering door locks, generating smoke or turning on lights.

I/Os also allow you to save storage space. For example, if you want to simply capture the identity

of a person at an entrance, you do not need the camera to continually send video. You can set up

the system in such a way that the camera is triggered to capture and send the necessary image

frames only when the door opens. I/O ports are available in all Axis network cameras and video

encoders.

> Video motion detection: Video motion detection monitors changes in the camera’s field of view

and if a change occurs (e.g. an intruder enters the scene), an alarm condition is generated. This

function can be a built-in feature of a network camera or a feature of a video management soft-

ware. Using the built-in video motion detection feature in a network camera reduces bandwidth

use since no video is delivered on the network unless video motion is detected. Video motion

detection is a standard feature in all Axis network cameras.

> Active tampering alarm: This is an intelligent video analytics application available in selected

Axis network video products. When a camera is manipulated in any way (e.g. accidental redirec-

tion, blocking, defocusing spray-painted, covered or damaged), it can automatically trigger

recordings and alert notifications.

Axis network

camera

Power over Ethernet-

enabled network switch

Computer

Microphone

Loudspeaker

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis IP-Surveillance system Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info