Bedienungsanleitung Axis P3343 (Seite 9 von 68) (Englisch)

613437

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

AXIS P33 Series - Accessing the Camera

Access from the internet

Once connected, the camera is accessible on your local network (LAN). To access the camera from the Internet you must

configure your broadband router to allow incoming data traffic to the camera. To do this, enable the NAT-traversal feature,

which will attempt to automatically configure the router to allow access to the camera. This is enabled from Setup > System

Options > Network > TCP/IP Advanced.

For more information, please see NAT traversal (port mapping) for IPv4, on page 40. See also the AXIS Internet Dynamic DNS

Service at www.axiscam.net For Technical notes on this and other topics, visit the Axis Support web at www.axis.com/techsup

Setting the root password

To gain access to the product, you must set the password for the default administrator user - ‘root’. This is done in the

Configure Root Password dialog, which appears when the network camera is accessed for the first time. To prevent network

eavesdropping the root password can be set via an encrypted HTTPS connection, which requires an HTTPS certificate.

Note:

HTTPS (Hypertext Transfer Protocol over SSL) is a protocol used to encrypt traffic between web browsers and servers.

The HTTPS certificate ensures encrypted exchange of information.

To set the password via a standard HTTP connection, enter it directly in the first dialog shown above.

To set the password via an encrypted HTTPS connection, follow these steps:

1. Click Create self-signed certificate.

2. Provide the requested information and click OK. The certificate is created and the password can now be set securely.

All traffic to and from the network camera is encrypted from this point on.

3. Enter a password and then re-enter to confirm the spelling. Click OK. The password has now been configured.

Notes:

• The default administrator user name ‘root’ is permanent and cannot be deleted.

• If the password for root is lost, the camera must be reset to the factory default settings. See page 47.

• If prompted, click Yes to install AXIS Media Control, which allows viewing of the video stream in Internet Explorer.

You will need administrator rights on the computer to do this. If using Windows 7 or Windows Vista, you must also

run Internet Explorer as administrator; right-click the Internet Explorer icon and select Run as administrator.

Configure capture mode

Capture mode defines how image data is taken from the image sensor

with respect to resolution and frame rate, and is set the first time the

camera is accessed. Select the desired capture mode from the drop-down

list and click OK. See also

Capture mode, on page 17.

To configure the password directly

via an unencrypted connection, enter

the password here.

To create an HTTPS connection,

click this button.

AXIS P3346

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis P3343 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info