Bedienungsanleitung Axis P3343 (Seite 30 von 68) (Englisch)

613437

Zoom out

Zoom in

Vorherige Seite

1/68

Nächste Seite

AXIS P33 Series - Events

Triggered Event

A triggered event could be activated by:

• a manually activated action, such as from an action button in the web interface

• detected movement in a configured motion detection window

• on restart (reboot), after power loss

• camera tampering

• input ports

• IR cut filter

•audio

• full disk

• fan malfunction

• application trigger

•temperature

• pan tilt zoom

How to set up a triggered event

The following example describes how to set up the camera to upload images when the main door is opened.

1. Click Add triggered... on the Event Types page. The Triggered Event Type Setup page appears.

2. Enter a descriptive Name for the event, such as Motion Detection. To configure motion detection see page 33.

3. Set the Priority - High, Normal or Low (see the online help).

4. Set the Respond to Trigger... parameters to define when the event is active, for example, after office hours.

5. Select the trigger alternative from the Triggered by... drop-down list.

6. Set the When Triggered... parameters, that is what the camera will do if motion is detected; this could be uploading

images to an FTP server or sending an e-mail notification.

7. Click OK to save the event in the Event Types list.

Please see the online help for information on the different options.

Note: Up to 10 event types can be configured in the camera, and up to three of these can be configured to upload images.

File names can be formatted according to specific requirements. See File Naming & Date/Time Formats in the online

help .

Pre-trigger and Post-trigger buffers

This function is useful when checking to see what happened immediately before and/or after a trigger, for example, 30

seconds before and/or after a door was opened.

In the Event Types page, select Add Triggered... and The Triggered Event Type Setup dialog appears. Check the Save stream

checkbox option under When Triggered... to view the options. All uploaded images are JPEG images.

Include pre-trigger buffer - images stored internally in the server from the time immediately preceding the trigger. Check the

box option to enable the pre-trigger buffer, enter the desired length of time and specify the required image frequency.

Include post-trigger buffer - contains images from the time immediately after the trigger. Configure as for pre-trigger.

Notes:

• Pre-trigger and Post-trigger buffers will be lost if the connection to the event server fails.

• The maximum length of the pre-/post-buffer depends on the video image size and selected frame rate.

• If the pre- or post-buffer is too large for the camera’s internal memory, the frame rate is reduced and no image will be

uploaded. If this occurs, an entry is created in the unit's log file.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Axis P3343 Seite 30

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info