27
5
Make sure you are using a main fuse protection for the +12V-
power input of the amplifier within max. 30 cm of the car bat-
tery and power cables with an amperage adequate cross-section and
main fuse (for details see section E: „Connecting“).
6
The GROUND/GND cable (-12V) should have the same cross-
section as the +12V power cable. Make sure to get a good chas-
sis ground contact, because poor ground contacts are the cause for most
power problems with car audio installations.
7
Make sure no cable routings are obstructing the drivers ma-
noeuvering or the passengers’ safety in any way at any time.
8
Make sure no power, signal or speaker lines are shorting to chas-
sis ground by using rubber grommets wherever a cable has to
pass through any metal part of the vehicle.
Important: Before any wiring, always remove the +12V terminal of
the battery to prevent short-circuiting. The last lead to be connec-
ted in every installation is always the positive +12 Volt terminal
of the battery. Connect this lead only after having completed and
checked all other connections.
C202 402 502 (D+E) 30.04.2001 10:14 Uhr Seite 27
