1. Insert USB / SD / MMC into the USB / SD / MMC input slots of the system.
2. Press the “FUNCTION” button to select USB / SD / MMC mode.
3. The unit will start to read the media and playback will start automatically.
note: The USB connector does not support connection with a USB extension cable and
it is not designed for communication with a computer directly.
The manufacturer is not responsible for the playability of a USB / SD / MMC disk or MP3 player
due to recording conditions, capacity, interface compatibility, etc.
Due to different formats, some USB / SD / MMC disks or MP3 players may take longer time to be read.
A USB stick may be connected directly or with a cable with max. 0,5 m length.
FOR NORMAL COMPACT DISC PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1. Program mode works in STOP mode only.
2. Holding “PROGRAM / MEMORY” button for 2 seconds to enter program mode.
The “PROG” icon will be turned on. “000 P01” will be shown with “000” ashing. “000”
represents track number and “P01” represents program location number.
3. Press TUNE + / NEXT or TUNE - / BACK button to select the required track number.
4. Press “PROGRAM / MEMORY” button to conrm the track number. The display
will show the next program number “000 P02”. The track number will be ashing
again and waiting for track number input.
5. Repeat steps 3 and 4 until all the desired tracks has been programmed or all the
program memories have been used. It will loop back to P01 after all the program
memories have been used. Same track number can be programmed more than once.
6. Press ENTER/PLAY/PAUSE button to playback.
7. To clear the programmed tracks, rst press “PROGRAM / MEMORY” button for
2 seconds to enter program mode.
8. Press STOP button to clear all the programmed memories.
GB 7
CD display
USB display
ENTER/PLAY/PAUSE
PROGRAMMED CD OPERATION
FOR MP3/WMA/USB/SD PLAYBACK
Programmed playback enables tracks on a disc to be played in the desired order. Up to 20 tracks can be programmed.
1. Program mode works in STOP mode only.
2. Holding PROGRAM / MEMORY button for 2 seconds to enter program mode.
The “PROG” icon will be turned on. “00 000 P01” will be shown with “00” ashing.
“000” represents track number and “P:01” repre sents program location number.
3. Press the TUNE + / NEXT or TUNE - / BACK button to select the desired folder.
4. Press TUNE + / NEXT or TUNE - / BACK button to select the required track number.
5. Press PROGRAM / MEMORY button to conrm the track number. The display
will show the next program number “000 P02”. The track number will be
ashing again and waiting for track number input.
6. Repeat steps 3 and 4 until all the desired tracks has been programmed or all the
program memories have been used. It will loop back to P01 after all the program
memories have been used. Same track number can be programmed more than once.
7. Press ENTER/PLAY/PAUSE button to playback.
8. To clear the programmed tracks, rst press PROGRAM / MEMORY button
for 2 seconds to enter program mode.
9. Press STOP button to clear all the programmed memories.
MP3/WMA/USB/SD display
ENTER/PLAY/PAUSE
PROGRAMMED USB/SD OPERATION
Program mode works in Stop mode
1. Hold the PROGRAM / MEMORY button for 2 seconds. Then, the “00000P:01” will be shown on the display and the rst 2 digits
will be ashing.
2. Press TUNE + / NEXT or TUNE - / BACK button to select the desired folder. After press PROGRAM /MEMORY button to
conrm the folder, the 3rd to 5th digits will be ashing.
3. Press TUNE + / NEXT or TUNE - / BACK button to select the desired track. Then, press PROGRAM / MEMORY button to
conrm the track number.
4. Press PROGRAM / MEMORY button again to conrm the setting. The display will show next program number.
5. Repeat the sequence as indicated in 2 to 4 for next program.
6. After all the desired programs have been selected, Press ENTER/PLAY/PAUSE button for playback.
PROGRAM/MEMORY
FUNCTION
USB / SD / MMC OPERATION
