Bedienungsanleitung B W Zeppelin Air (Seite 8 von 130) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Norwegisch)

461404

Zoom out

Zoom in

Vorherige Seite

1/130

Nächste Seite

ENGLISH

5.2 Setting up Zeppelin Air using the

Zeppelin Air Temporary Wireless Network

You can also set up your Zeppelin Air to join your

wireless network by rst temporarily connecting

a computer to the Zeppelin Air’s own temporary

wireless network. Follow the steps described below.

Make sure you have a record of your home

network name and password before you start.

• Unplug every cable from the Zeppelin Air and

undock any docked iPod or iPhone.

• Connect the power cable. Zeppelin Air will switch

on in Standby mode with the indicator illuminated

dim red.

• Press the Standby button once. The indicator will

ash purple. Wait until the indicator starts to ash

yellow (could be up to 60 seconds). This indicates

that the Zeppelin Air device is in temporary

wireless network mode and can be identied within

your wireless connections.

• If the computer to be used to connect to the

Zeppelin Air temporary wireless network is already

connected to your home wireless network it will be

disconnected at the next stage. Make sure you

have a record of your home network name

and password before disconnecting.

Note: Your computer is unlikely to be able to

access your home network and the internet while

it is connected to the Zeppelin Air temporary

wireless network.

• Use the computer’s wireless network control panel

to join the Zeppelin Air default network called

Zeppelin_Air_Setup. The Zeppelin Air default

network requires no password. Joining the network

may take up to 45 seconds.

Note: The Zeppelin Air default wireless network

should not be used for anything more than

temporary setup access.

• Using an internet browser application running on

the computer connected to the Zeppelin Air wireless

network, type the Zeppelin Air default network

address (https://169.254.1.1) in the browser

address eld and press “return”. After requesting

acceptance of a digital security certicate this will

open the Zeppelin Air setup page (see Diagram 7).

Note: An alternative network address for the

Zeppelin Air setup page is http://169.254.1.1.

Use of this address however carries a small

security risk.

• Before you connect to the home wireless network,

the setup page provides the option to change the

Zeppelin Air name. Changing the name is useful

if more than one Zeppelin Air is to be connected

to the network. Enter a new name (Zeppelin Air

Kitchen for example) in the Zeppelin Air Name

box and click on Apply, press “OK” at the “New

settings were successfully applied” page to return

to the setup page.

• Select your home network Name from the

drop down list and enter the Password in the

appropriate box. Take care to type the password

correctly.

Note: If your home network name is not initially

visible in the setup page drop down list, reload

the page.

• When you are nished, click on the Join button

and on the OK button in the following dialogue

box, then close the Zeppelin Air setup page.

• The computer can now be disconnected from the

Zeppelin Air temporary network and reconnected

to your home wireless network if desired. It may

have reconnected automatically.

• The Zeppelin Air Indicator illuminates continuous

purple when the wireless network connection is

established. This may take up to 15 seconds.

Note: If Zeppelin Air fails to connect to your

home network, the most likely fault is an

incorrectly entered network password. Follow

the reset instructions in Section 8 and begin the

network setup procedure again.

5.3 Setting up Zeppelin Air using an iPod

touch, iPhone or iPad

It is possible to set up Zeppelin Air using the Safari

browser on your iPod touch, iPhone or iPad. Make

sure you have a record of your home network name

and password before you start. Additionally, it is

recommended that you disable the 3G network (on

your iPhone or iPad) and have Java script on (iPod

touch, iPhone or iPad).

• Connect only your power cable. Zeppelin Air will

switch on in Standby mode with its indicator

showing dim red.

• Press the Standby button once. The indicator will

ash purple. Wait until the indicator starts to ash

yellow (could be up to 60 seconds). This indicates

that the Zeppelin Air device is in temporary

wireless network mode and can be identied within

your wireless connections.

• Access your iPod touch, iPhone or iPad Wi-Fi

connection within the Settings menu.

Diagram 8

iTunes device menu

• Select the Zeppelin_Air_Setup network. This will

disconnect your device from the existing network

and then connect to the Zeppelin Air.

• Open the Safari browser on your iPod touch,

iPhone or iPad. In the address bar of Safari type

169.254.1.1 and press ‘Go’. The Zeppelin Air

setup page will open. You may need to zoom on

the page to see clearly.

• Before you connect to the home wireless network,

the setup page provides the option to change the

Zeppelin Air name. Changing the name is useful

if more than one Zeppelin Air is to be connected

to the network. Enter a new name (Zeppelin Air

Kitchen for example) in the Zeppelin Air Name box

and press ‘Apply Now’. Press OK to conrm the

new setting and return to the setup page.

• Select your home network Name from the

drop down list and enter the Password in the

appropriate box. Take care to type the password

correctly.

• Click on the Join button and on the OK button in

the following dialogue box, then close the Zeppelin

Air setup page.

• Return to the Wi-Fi connection within your device’s

setup menu and reselect your home network.

5.4 Conguring iTunes

With Zeppelin Air connected to your home network

(wired or wireless) you can congure iTunes to use it

as an output device. Congure iTunes by selecting

Zeppelin Air in the devices menu at the bottom right

hand corner of the iTunes display. (see Diagram 8)

iTunes will now play through the Zeppelin Air.

Diagram 7

Zeppelin Air temporary wireless network

45s

http://169.254.1.1

Change Settings

Current Settings

Wireless network:

Password:

Choose item

Another network 01

Your hone network

Join

http://......

Warning: Incorrect parameters may cause undesired

behaviour. To save the new settings, click OK and then

unplug the network cable

B W Zeppelin Air Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info