Bedienungsanleitung Baby Jogger City Mini 2 - 4 wheel (Seite 11 von 147) (Alle Sprachen)

768600

Zoom out

Zoom in

Vorherige Seite

1/147

Nächste Seite

FRAME

1 Unpack the pushchair frame from

the box and set the wheels aside.

Unlock the pushchair by pullin the

storae lock lever.

2 Unfold the pushchair by pullin the

handlebar away from the frame.

3 The pushchair will lock into place

and you will hear a click.

WARNING: Ensure that all the

lockin devices are enaed before

use.

FRONT WHEELS

4 Installation

• Lay pushchair on its back so the

handlebar is restin on the ﬂoor.

• Attach the front wheel by slidin

it into the front wheel mount until

it clicks. Gently pull on the front

wheel to make sure it is properly

attached.

5 Removal

• While pressin the front wheel

release button, ently slide the

front wheel out of the front wheel

mount.

SWIVEL FEATURE

6 Press the Swivel Lock button down

and slide the Swivel Lock to the left

to lock the front wheel assembly

in a ﬁxed position for lon distance

strollin.

7 Press the Swivel Lock button

down and slide the Swivel Lock to

the riht to allow the front wheel

assembly to swivel.

WARNING: When loadin and

unloadin child, lock the front

wheels in a ﬁxed position. Althouh

the front wheels of your pushchair

lock, it is not intended for join or

exercise purposes.

REAR WHEELS

8 Installation

• Alin the rear wheel axle with the

wheel mount on the pushchair

frame and insert it into the wheel

mount until it locks into place. You

will hear a click.

• Gently pull on the rear wheel to

make sure it is properly attached.

9 Removal

• While pressin down on the wheel

release button, ently slide the rear

wheel out of the wheel mount.

BRAKE

10 To lock the brakes: push the brake

lever down to enae the brakes.

11 To release the brakes: lift the brake

lever up.

WARNING: Lock the brakes before

loadin and unloadin your child

and whenever the pushchair is not

movin.

CANOPY

12 Attach the canopy to the frame by

slidin the canopy onto one of two

mountin brackets. To remove, slide

canopy o of mounts.

NOTE: When usin a City Go/

Graco or Britax car seat, the

canopy must be in the top

position. For all other car seats,

canopy must be removed.

13 Snap the two snaps to the

pushchair frame.

14 Zip the back of the seat to the

canopy top.

Attach the 2 fastenin strips on the

side of the canopy.

15 Pull forward to open canopy and

push backwards to close canopy.

16 There are two canopy windows, a

top one and back one. To use them,

roll the shade up towards the top

and secure with the elastic and

button.

ADJUSTING SAFETY HARNESS

17 From the back of the seat, unfasten

and open the pocket to locate the

plastic square stopper. Turn stopper

and pass throuh the openins in the

PE board and seat fabric.

18 Reinsert stopper at seat openin

closest to child’s shoulders. Pass

back throuh seat fabric and PE

board. Tu on strap to ensure

stopper is locked. Repeat on both

sides.

WARNING: Avoid serious injury from

fallin or slidin out. Always properly

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Jogger City Mini 2 - 4 wheel Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info