Bedienungsanleitung Baby Jogger City Mini GT 2 Double (Seite 11 von 148) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

768597

Zoom out

Zoom in

Vorherige Seite

1/148

Nächste Seite

FRAME

1 Unpack the pushchair frame from the

box and set the wheels aside.

Unlock the pushchair by pullin the

auto-lock lever.

2 Unfold the pushchair by pullin the

handlebar away from the frame. The

pushchair will lock into place and you

will hear a click.

3 Place the pushchair in the upriht

position.

WARNING: Ensure that all the lockin

devices are enaed before use.

FRONT WHEEL

4 Installation

• Lay pushchair on its back so the

handlebar is restin on the ﬂoor.

• Attach front wheels by slidin them

into the front wheel mount until it

clicks. Gently pull on the front wheel

to make sure it is properly attached.

5 Removal

• While pressin the front wheel release

button, ently slide the front wheel out

of the front wheel mount.

SWIVEL FEATURE

6 Push the swivel button down and

rotate to the left to lock the front wheel

assembly in a ﬁxed position for lon

distance strollin.

7 Push the swivel button down and

rotate to the riht to allow the front

wheel assembly to swivel.

WARNING: When loadin and

unloadin child, lock the front wheel

in a ﬁxed position. Althouh the front

wheel of your pushchair locks, it is

not intended for join or exercise

purposes.

REAR WHEELS

8 Installation

• Alin the rear wheel axle with the

wheel mount on the pushchair frame

and insert it into the wheel mount until

it locks into place. You will hear a click.

• Gently pull on the rear wheel to make

sure it is properly attached.

9 Removal

• While pressin down on the wheel

release button, ently slide the rear

wheel out of the wheel mount.

HANDLE

10 Press the handle release buttons on

both sides and rotate up or down to

the new position.

BRAKE

11 To Lock the Brakes: ently pull the

Brake Lever into upriht position until it

clicks into place.

12 To Release the Brakes: Pinch the ray

tabs and pull the lever towards you.

Push the Brake Lever down until it is

parallel with the frame.

WARNING:Lock the brakes before

loadin and unloadin your child and

whenever the pushchair is not movin.

CANOPY

13 Attach the canopy to the frame by

slidin the canopy onto the mountin

brackets. To remove, slide canopy o

of mountin brackets.

NOTE: When usin a Car Seat, canopy

must be removed.

14 Snap the 3 snaps to the pushchair

frame.

15 Attach the fastenin strip on the back

of the canopy to the frame.

16 Pull forward to open canopy and push

backwards to close canopy.

17 There are two canopy windows, a top

one and back one. To use them, roll

the shade up towards the top and

secure with the elastic and button.

ADJUSTING SAFETY HARNESS

18 From the back of the seat, undo the

fastenin strip and open the pocket to

locate the plastic square stopper. Turn

stopper and pass throuh the openins

in the PE board and seat fabric.

19 Reinsert stopper at seat openin

closest to child’s shoulders. Pass back

throuh seat fabric and PE board. Tu

on strap to ensure stopper is locked.

Repeat on both sides.

NWL0000982896A City Mini GT2 DOUBLE EMEA R03 FINAL.indd 11 7/10/19 1:40 PM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Jogger City Mini GT 2 Double Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info