Bedienungsanleitung Baby Jogger City Mini GT 2 (Seite 12 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch, Schwedisch, Finnisch)

768596

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

RAME

1 Unpack the pushchair frame from the

box and set the wheels aside.

Unlock the pushchair by pullin the

storae lock Lever.

2 Unfold the pushchair by pullin the

handlebar away from the frame. Then

lift the handlebar away from the seat.

The pushchair will lock into place and

you will hear a click.

3 Place the pushchair in the upriht

position.

WARNING: Ensure that all the lockin

devices are enaed before use.

FRONT WHEEL

4 Installation

• Lay pushchair on its back so the

handlebar is restin on the ﬂoor.

• Attach the Front Wheel by slidin

it into the front wheel mount until it

clicks. Gently pull on the Front Wheel

to make sure it is properly attached.

5 Removal

• While pressin the front wheel release

button, ently slide the Front Wheel

out of the front wheel mount.

SWIVEL FEATURE

6 Push the swivel button down and

rotate to the left to lock the front wheel

assembly in a ﬁxed position for lon

distance strollin.

7 Push the swivel button down and rotate

to the riht to allow the front wheel

assembly to swivel.

WARNING: When loadin and

unloadin child, lock the front wheel in a

ﬁxed position. Althouh the front wheel

of your pushchair lock, it is not intended

for join or exercise purposes.

REAR WHEELS

8 Installation

• Alin the rear wheel axle with the

wheel mount on the pushchair frame

and insert it into the wheel mount until

it locks into place. You will hear a click.

• Gently pull on the rear wheel to make

sure it is properly attached.

9 Removal

• While pressin down on the wheel

release button, ently slide the rear

wheel out of the wheel mount.

BRAKE

10 To Lock the Brakes: ently pull the Brake

Lever into upriht position until it clicks

into place.

11 To Release the Brakes: Pinch the ray

tabs and pull the lever towards you. Push

the Brake Lever down until it is parallel

with the frame.

WARNING: Lock the brakes before

loadin and unloadin your child and

whenever the pushchair is not movin.

CANOPY

12 Attach the canopy to the frame by

slidin the canopy onto one of two

mountin brackets. To remove, slide

canopy o of mounts.

NOTE: When usin a City Go/

Graco or Britax car seat, the

canopy must be in the top position.

For all other carseats, canopy must

be removed.

13 Snap the two snaps to the pushchair

frame.

14 Zip the back of the seat to the canopy

top.

Attach the 2 fastenin strips on the side

of the canopy.

15 Pull forward to open canopy and push

backwards to close canopy.

16 There are two canopy windows, a top

one and back one. To use them, roll the

shade up towards the top and secure

with the elastic and button.

HANDLE

17 To chane the handle to one of 6 use

positions, press the handle release

buttons on both sides and rotate up or

down to the new position.

ADJUSTING SAFETY HARNESS

18 From the back of the seat, unfasten and

open the pocket to locate the plastic

square stopper. Turn stopper and pass

throuh the openins in the PE board

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Jogger City Mini GT 2 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info