525687
33
Zoom out
Zoom in
Vorherige Seite
1/38
Nächste Seite
HELPFUL HINTS
Machine not properly threaded.
Rethread
machine.
13
Upper thread
Thread entwined around bobbin.
Clean bobbin area and rethread
bobbin case.
12
breaks
Needle inserted incorrectly.
Reinsert needle.
6
Thread tension too tight.
Readjust thread tension.
17
Thread of incorrect size or poor
quality.
Choose correct thread.
18
Lower thread Bobbin threaded incorrectly. Rethread the bobbin.
12
breaks Bobbin wound unevenly or too
full.
Rewind the bobbin.
11
Dirt in the bobbin and hook area. Clean the bobbin and hook area.
30
Needle inserted incorrectly. Reinsert needle.
6
Machine skips Bent or blunt needle. Insert new needle.
18
stitches Incorrect
Incorrect size needle
size of needle. Choose correct size needle
for fabric.
18
on stretch fabric.
Use stretch needle.
Machine not properly threaded.
Rethread machine.
13
Fabric puckers Bobbin threaded incorrectly. Rethread the bobbin. 12
Blunt needle. Insert new needle. 6
Thread tension too tight. Readjust thread tension. 17
Machine makes
Bobbin threaded incorrectly.
Rethread the bobbin. 12
loose stitches Machine not properly threaded. Rethread machine. 13
or loops Tension not adjusted properly. Readjust thread tension. 17
Threader does Needle is not raised. Raise the needle.
8
not thread Needle inserted incorrectly. Reinsert needle.
6
needle eye Bent needle. Insert new needle. 6
Machine does Feed dogs are lowered. Raise the feed dogs. 8
not feed
properly Lint and dust accumulated around Clean the feed dogs area. 30
feed dogs.
Fabric pulled while sewing. Do not pull fabric. 15
Needle is hitting the presser foot. Select correct foot and pattern. 19
Needle breaks Needle inserted incorrectly. Reinsert needle. 6
Incorrect size needle or thread for Choose correct size needle 18
fabric being sewn. and thread.
Machine runs Dirt or lint accumulated in the hook Remove the needle plate 30
with difficulty race and feed dog. and bobbin case and clean
the hook race and feed dog.
Cord not plugged into electrical Insert plug fully into outlet. 7
outlet.
Power switch is not turned on. Turn on the switch.
7
Machine will not Bobbin winder spindle is pushed to Push spindle to the left. 11
run the right.
Presser foot is not lowered. Lower
Lower the buttonhole lever.
the foot. 15
23
23
Buttonhole Sewing Mode;
Buttonhole lever is not lowered
completely.
Buttonhole foot is not attached.
PROBLEM
CAUSE CORRECTION PAGE
Attach the buttonhole foot.
-31-
-
-
-
-
6
33

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Baby Lock Audrey BL67 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Baby Lock Audrey BL67

Baby Lock Audrey BL67 Kurzanleitung - Englisch - 12 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info