661184
197
Zoom out
Zoom in
Vorherige Seite
1/225
Nächste Seite
TROUBLESHOOTING
390
Upper thread breaks. Machine is not threaded correctly (used the
wrong spool cap, spool cap is loose, the
thread did not catch the needle bar threader,
etc.)
Rethread the machine correctly. 60
Knotted or tangled thread is being used. Remove any knots or tangles.
The selected needle is not appropriate for the
thread being used.
Select a needle that is appropriate for the type
of thread being used.
75
Upper thread tension is too tight. Adjust the thread tension. 90, 287
Thread is twisted. Use scissors, etc., to cut the twisted thread
and remove it from the race, etc.
Needle is turned, bent or the point is dull. Replace the needle. 73
Needle is installed incorrectly. Reinstall the needle correctly. 73
There are scratches around the opening of the
needle plate.
Replace the needle plate, or consult your
authorized Baby Lock retailer.
117
There are scratches around the opening in the
presser foot.
Replace the presser foot, or consult your
authorized Baby Lock retailer.
68
There are scratches on the bobbin case. Replace the bobbin case, or consult your
authorized Baby Lock retailer.
376
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
While sewing, the thread became knotted or
tangled.
Rethread upper and lower thread. 57, 60
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
57
The thread is tangled
on the wrong side of
the fabric.
Upper threading is incorrect. Check the steps for threading the machine and
rethread the machine. Be sure that the presser
foot is in the raised position when threading
the machine so that the upper thread sets
properly in the upper tension.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
The upper thread is
too tight.
The bobbin thread is incorrectly installed. Correctly install the bobbin thread. 57
Bobbin thread
breaks.
Bobbin is set incorrectly. Reset the bobbin thread correctly. 57
Bobbin thread is incorrectly wound. Use a correctly wound bobbin. 52
There are scratches on the bobbin or it doesn’t
rotate properly.
Replace the bobbin. 57
Thread is twisted. Use scissors, etc. to cut the twisted thread
and remove it from the race, etc.
A bobbin designed specifically for this
machine is not used.
Incorrect bobbins will not work properly. Only
use a bobbin designed specifically for this
machine.
57
Fabric puckers. There is a mistake in the upper or bobbin
threading.
Check the steps for threading the machine and
rethread it correctly.
57, 60
Spool cap is set incorrectly. Check the method for attaching the spool cap,
then reattach the spool cap.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
Needle is turned, bent or the point is dull. Replace the needle. 73
Stitches are too long when sewing thin fabrics. Shorten the stitch length. 89
Thread tension is set incorrectly. Adjust the thread tension. 90, 287
Wrong presser foot. Use the correct presser foot. “STITCH SETTING
CHART”
The stitch is not sewn
correctly.
The presser foot that is used is not appropriate
for the type of stitch that you wish to sew.
Attach the presser foot that is appropriate for
the type of stitch that you wish to sew.
“STITCH SETTING
CHART”
The thread tension is incorrect. Adjust the tension of the upper thread. 90
The thread is tangled, for example, in the
bobbin case.
Remove the tangle thread. If the thread is
tangled in the bobbin case, clean the race.
376
Skipped stitches Machine is threaded incorrectly. Check the steps for threading the machine and
rethread it correctly.
60
Using improper needle or thread for the
selected fabric.
Check the “Fabric/Thread/Needle
Combinations” chart.
75
Problem Cause Solution Page
197

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Baby Lock Destiny II - BLDY2 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Baby Lock Destiny II - BLDY2

Baby Lock Destiny II - BLDY2 Zusatzinformation - Englisch - 52 seiten

Baby Lock Destiny II - BLDY2 Bedienungsanleitung - Englisch - 198 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info