Bedienungsanleitung Baby Lock Ellure Plus - BLR3 (Seite 140 von 200) (Englisch)

661189

140

Zoom out

Zoom in

Vorherige Seite

1/200

Nächste Seite

138

EMBROIDERY 

Successful Embroidering

This section describes the preparations and basic procedures for embroidering.

What to prepare

The following is necessary for embroidering.

■ Fabric

Prepare the fabric for embroidery. Prepare a piece

of fabric a little larger than the embroidery frame

that matches the size of the pattern you want to

sew.

Note

z Always use stabilizer when sewing

embroidery projects, especially when

embroidering on lightweight or stretch

fabrics. Not using a stabilizer may result in

poor quality embroidery designs.

z When embroidering on large pieces of

fabric, arrange the fabric so that it does not

hang off the table where the sewing machine

is placed. If embroidery is done with the

fabric hanging off, the embroidery unit

movement may be impaired, this could

cause the pattern to sew incorrectly.

CAUTION

■ Stabilizer material

Stabilizer material is used for backing and topping

to stabilize and support the fabric being

embroidered so the stitches can be sewn with the

least amount of interference or instability.

Without the proper type of backing stabilizer, the

fabric may move too much within the embroidery

frame causing poor alignment of the embroidery.

At times, topping will be required in order to

manage fabrics with a pile-like surface, such as

towels, corduroy and pique knit. There are many

types of backing and topping stabilizers with

various weights for the various fabrics that you

may be sewing. Visit your local retailer to find the

stabilizer that is right for your project.

■ Embroidery thread

For the upper thread, use a good quality

embroidery thread. Choice of the upper thread is

a major factor in a successful embroidery design.

The thread strength, consistency and weight all

affect the design results. These qualities

determine how well the machine will sew and the

number of thread breaks during sewing.

For the bobbin thread, use the recommended

embroidery bobbin thread found on the

accessories page or visit your local retailer for

additional thread.

Note

z For good quality embroidery designs be sure

to use embroidery thread designed for

embroidery machines.

z Before starting to sew, be sure there is

enough bobbin thread. If you continue

embroidering when the bobbin thread is

low, the thread may become tangled.

● Do not embroider fabrics that are too

thick. To check the fabric thickness,

attach the embroidery frame to the

embroidery unit, and use (“Needle

Position” button) to raise the needle. If

there is space between the presser foot

and the fabric, the fabric can be

embroidered. If there is not space, do not

embroider the fabric. Otherwise, the

needle may break, resulting in injury.

● Be careful when sewing overlapping

patterns. The needle may not easily pierce

the fabric, causing the needle to break.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Ellure Plus - BLR3 Seite 140

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Ellure Plus - BLR3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info