614492
79
Zoom out
Zoom in
Vorherige Seite
1/92
Nächste Seite
Heavy-weight threads can be used through your regular looper thread
paths. Specific techniques may require that the thread bypass the
thread port for the thread pull to be loosened. Start with the machine
threaded with regular serger thread.
1. Open front cover and raise the presser foot.
2. Just above the threading port, clip the looper thread to be replaced.
Pull the thread out of the upper guides and remove the cone.
3. Place the specialty thread on the spool pin. Thread it into the upper
guides and clip it a couple of inches beyond the base plate (fig. A).
4. With machine lock button released, use the tweezers to pull the exist-
ing looper thread out of tube extending from the threading mecha-
nism (fig. B). Leave the thread in the looper arm.
5. Tie the specialty thread onto the regular thread with an overhand knot
(fig. C). Pull on the regular thread from the looper eye until the spe-
cialty thread comes through the looper eye.
6. Place upper looper thread under the foot and to the left: clip lower
looper thread at the base plate.
If the thread is heavy and the overhand knot (step #5) is too large for the
looper tube, follow directions #1 thru #6 on page 79 to make a thread
cradle. Then:
1. Release machine lock button.
2. While holding the loose ends of the thread cradle with one hand, use
the tweezers to pull the cradle loop out of the tube extending from the
threading mechanism with the other hand.
3. Insert 2 inch(5cm) of your decorative thread into the cradle loop. Pull
on the loose ends of the thread cradle from the looper eye until the
specialty thread comes through the looper eye.
S
P
E
C
I
A
L
T
Y
T
H
R
E
A
D
S
77
Bypassing the Threading Port
A
B
C
D
79

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Baby Lock Evolve BLE8W wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info