661238
75
Zoom out
Zoom in
Vorherige Seite
1/100
Nächste Seite
Making Embroidery Adjustments
Embroidering E-27
EMBROIDERY
E
c
Press .
Adjusting the bobbin case (with no color on
the screw)
The bobbin case (with no color on the screw) can be adjusted
when bobbin tension changes are required to accommodate
different bobbin threads. See “Embroidery Attractive Finishes
in the “Basic operations”.
To adjust the bobbin tension for embroidery function, using
the bobbin case (with no color on the screw), turn the
slotted-head screw (-) with a screwdriver (small).
1 Do not turn the phillips screw (+).
2 Adjust with a screwdriver (small).
Correct tension
Upper thread slightly appears on the wrong side of fabric.
1 Right side
2 Wrong side
Bobbin thread is too loose
Bobbin thread appears slightly on the right side of fabric.
1 Right side
2 Wrong side
If this occurs, turn the slotted-head screw (-) clockwise,
being careful not to over-tighten the screw, approximately
30-45 degrees to increase bobbin tension.
Bobbin thread is too tight
Upper thread on the right side of fabric seems to be
lifting/looping and bobbin thread is not seen on the wrong
side of fabric.
1 Right side
2 Wrong side
If this occurs, turn the slotted-head screw (-)
counterclockwise, being careful not to over-loosen the
screw, approximately 30-45 degrees to decrease bobbin
tension.
Note
With “Embroidery Tension” on the setting
screen, the tension of the upper thread can be
adjusted for embroidering. The selected setting
will be applied to all patterns.
When embroidering, if the overall tension of the
upper thread is too tight or too loose, adjust it
from the setting screen. Press to tighten the
upper thread tension and press to loosen the
upper tension. If an individual embroidery pattern
needs additional fine tuning, refer to “Adjusting
thread tension” on page E-26.
CAUTION
When adjusting the bobbin case, be sure to
remove the bobbin from the bobbin case.
DO NOT adjust the position of the phillips (+)
screw on the bobbin case as this may result in
damage to the bobbin case, rendering it
unusable.
If the slotted-head screw (-) is difficult to turn,
do not use force. Turning the screw too much
or providing force in either (rotational)
direction may cause damage to the bobbin
case. Should damage occur, the bobbin case
may not maintain proper tension.
75

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Baby Lock Flourish BLMFO wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Andere Handbücher von Baby Lock Flourish BLMFO

Baby Lock Flourish BLMFO Kurzanleitung - Englisch - 12 seiten

Baby Lock Flourish BLMFO Zusatzinformation - Englisch - 44 seiten

Baby Lock Flourish BLMFO Kurzanleitung - Französisch - 12 seiten

Baby Lock Flourish BLMFO Zusatzinformation - Französisch - 44 seiten

Baby Lock Flourish BLMFO Kurzanleitung - Spanisch - 12 seiten

Baby Lock Flourish BLMFO Zusatzinformation - Spanisch - 44 seiten


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info