Bedienungsanleitung Baby Lock Flourish BLMFO (Seite 90 von 100) (Englisch)

661238

Zoom out

Zoom in

Vorherige Seite

1/100

Nächste Seite

Troubleshooting

A-6

If the machine stops operating correctly, check the following possible problems before requesting service.

You can solve most problems by yourself or visit us at “ www.babylock.com

”.

If the problem persists, contact your Baby Lock retailer.

List of symptoms

■ Getting ready

Troubleshooting

Symptom Probable Cause Remedy Reference

Cannot thread the

needle.

Needle is not in the correct position. Press the “Needle position” button to raise the

needle.

B-4

Needle is installed incorrectly. Reinstall the needle correctly. B-23

Needle is turned, bent or the point is dull. Replace the needle. B-23

Upper threading is incorrect. Check the steps for threading the machine and

rethread the machine.

B-19

The needle threader hook is bent and does not

pass through the eye of the needle.

Contact your authorized Baby Lock retailer. –

The needle threader lever cannot be moved or

returned to its original position.

Contact your authorized Baby Lock retailer. –

Cannot lower the

presser foot with

the presser foot

lever.

Presser foot was raised using the “Presser foot

lifter” button.

Press the “Presser foot lifter” button to lower

the presser foot.

B-4

Bobbin thread

does not wind

neatly on the

bobbin.

The thread is not passed through the bobbin

winding thread guide correctly.

Correctly pass the thread through the bobbin

winding thread guide.

B-16

The thread that was pulled out was not wound

onto the bobbin correctly.

Wind the thread that was pulled off around the

bobbin 5 or 6 times clockwise.

B-16

The empty bobbin was not set on the pin

properly.

Set the empty bobbin on the pin and slowly turn

the bobbin until you hear it click in place.

B-14

While winding the

bobbin, the bobbin

thread was wound

below the bobbin

winder seat.

You have not wound the bobbin thread properly.

While initially winding thread on the bobbin the

bobbin thread is not properly inserted into the

guides.

After removing the thread wound below the

bobbin winder seat, wind the bobbin correctly.

Follow the drawn images on the top of the

machine for guidance when threading the

machine for bobbin winding.

B-14

The bobbin thread

cannot be pulled

up.

Bobbin is set incorrectly. Reset the bobbin correctly. B-17

Nothing appears in

the LCD.

Main power switch is not turned on. Turn the main power to ON. B-8

The plug of the power cord is not inserted into

an electrical outlet.

Insert the plug of the power cord into an

electrical outlet.

B-8

The LCD screen is

fogged up.

Condensation has formed on the LCD screen. After a while, the cloudiness will disappear. –

The operation keys

do not respond.

A glove is worn when the keys are pressed.

The keys are pressed with a fingernail.

A non-electrostatic touch pen is being used.

Directly touch the operation keys with your

finger.

B-4

The operation keys

do not respond, or

the sensitivity is

too strong.

The sensitivity of the operation keys is not set

for the user.

Adjust the sensitivity of the operation keys. B-12

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Flourish BLMFO Seite 90

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Flourish BLMFO

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info