Bedienungsanleitung Baby Lock Katherine - BL210A (Seite 12 von 140) (Englisch)

661200

Zoom out

Zoom in

Vorherige Seite

1/140

Nächste Seite

Names of Machine Parts and Their Functions

B-4

Operation buttons

1 “Start/Stop” button

Press the “Start/Stop” button to start or stop sewing. The

machine stitches at a slow speed at the beginning of sewing

while the button is pressed. When sewing is stopped, the

needle is lowered in the fabric. For details, refer to “STARTING

TO SEW” on page B-31.

The button changes color according to the machine’s

operation mode.

2 Reverse stitch button

For straight, zigzag, and elastic zigzag stitch patterns that use

reverse stitches, the machine will sew reverse stitches at low

speed only while holding down the Reverse stitch button. The

stitches are sewn in the opposite position.

For other stitches, use this button to sew reinforcement

stitches at the beginning and end of sewing. Press and hold

this button, and the machine sews 3 stitches in the same spot

and stops automatically. (page B-35)

3 Reinforcement stitch button

Use this button to sew a single stitch repeatedly and tie-off.

For character/decorative stitches, press this button to end with

a full stitch instead of at a mid-point. The LED light beside this

button lights up while the machine is sewing a full motif, and

automatically turns off when the sewing is stopped. (page B-

35)

4 Needle position button

Press the needle position button to raise or lower the needle.

Pressing the button twice sews one stitch.

5 Thread cutter button

Press the thread cutter button after sewing is stopped to cut

both the upper and the bobbin threads. For details, refer to

step

j under “Sewing a stitch” section on page B-33.

6 Presser foot lifter button

(Equipped on some models. Refer to page B-6)

Press this button to lower the presser foot and apply pressure

to the fabric. Press this button again to raise the presser foot.

7 Sewing speed controller

Slide the sewing speed controller to adjust the sewing speed.

Operation panel and operation keys

The keys with * are lit while they are ON.

1 LCD (liquid crystal display)

Settings for the selected stitch and error messages for

incorrect operations appear in the LCD.

For details, refer to “LCD” on page B-9

2 Pivot key *

(Equipped on some models. Refer to page B-6)

Press to activate pivot function.

3 Automatic reverse/reinforcement key *

Press to use the automatic reverse/reinforcement stitching

function.

4 Automatic thread cutting key *

Press to select the automatic thread cutting function.

5 Stitch length keys/Item selection keys

Press to adjust the stitch length or to select the next/previous

items in the settings screen.

6 Thread tension keys (Equipped on some models.

Refer to page B-6)/Value selection keys

Press to adjust the thread tension or to change the value of the

selected item in the settings screen.

7 Settings key

Press to select sewing settings or other settings, or to move to

next pages in the settings screen.

8 Manual memory key

Press to save the adjusted stitch width and length settings. For

models equipped with the thread tension keys (Refer to

page B-6.), the thread tension setting is also saved.

9 Mirror image key

Press to create a mirror image of the selected stitch pattern.

0 Single/repeat sewing key

Press to choose single pattern or continuous patterns.

A Back to beginning key

Press this key to return to the beginning of the pattern.

B Presser foot/Needle exchange key

Press this key before changing the needle, the presser foot,

etc.

This key locks all key and button functions to prevent operation

of the machine.

C Memory key

Press to save stitch pattern combinations to machine memory.

D Reset key

Press to reset the selected stitch to its original settings.

Green: The machine is ready to sew or is sewing.

Red: The machine can not sew.

Orange: The machine is winding the bobbin thread, or

the bobbin winder shaft is moved to the right

side.

CAUTION

• Do not press (Thread cutter button) after

the threads have already been cut, otherwise

the needle may break, the threads may

become tangled or damage to the machine

may occur.

bc d e f

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Katherine - BL210A Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Katherine - BL210A

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info