Bedienungsanleitung Baby Lock Melody - BLMY (Seite 74 von 158) (Englisch)

661204

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

UTILITY STITCHES — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — — —

Use the numeric keys to type in the two-digit

number for the desired stitch.

For stitches 01 through 09, the stitch can also

be selected by using the numeric keys to type in

a one-digit number, then pressing (OK

key).

X After the entered number appears in the

center of the screen, the stitch is selected.

 Example

• For the numbers of the various stitches, refer

to the stitch pattern plate and “Stitch Settings”

(page 132).

• If the first number (tens when entering two-

digit numbers, ones when entering one-digit

numbers) was incorrectly entered, press

(Cancel/clear key) to erase the entered

number.

• If an incorrect two-digit number was entered,

an error beep is sounded, and the entered

number is cleared.

If necessary, specify the setting for automatic

reverse/reinforcement stitching and adjust the

stitch length, etc.

• For details on sewing with each of the utility

stitches, begin on page 74.

Note

z When a stitch is selected, the icon for the

presser foot that should be used appears in

the screen. Check that the correct presser

foot is attached before starting to sew. If the

wrong presser foot is installed, turn off the

sewing machine, attach the correct presser

foot, and then select the desired stitch again.

Memo

z For details on adjusting the stitch width and

length, refer to “Adjusting the Stitch Width

and Length” (page 57).

■ To select a different stitch

Check the icon in the lower-left corner of the

screen for the current mode.

 To select a stitch in the same mode as the

current one

• In the utility stitch mode, simply type in the

number for the desired stitch.

• In the decorative stitch mode and character

stitch mode, press (Cancel/clear key) to

cancel the stitch, and then type in the

number for the desired stitch.

• However, if the currently selected stitch was

sewn at least one time, typing in a stitch

number switches to the new stitch, even if

the previous stitch was not canceled.

Memo

z Patterns can be combined by selecting a

different decorative stitch while a stitch is

selected. For details, refer to “Saving

patterns” (page 128).

 To select a stitch in a different mode as the

current one

• After selecting a different mode, type in the

number for the desired stitch. (Refer to steps

e on pages 70 through 72.)

When switching from the utility stitch mode to

the decorative stitch or character stitch mode or

the other way around, all stitches that have been

selected are erased so that a new stitch can be

selected. In order to prevent stitches from

incorrectly being erased, the following

confirmation message appears.

The current mode is indicated.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Melody - BLMY Seite 74

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Melody - BLMY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info