Bedienungsanleitung Baby Lock Presto BLMPR (Seite 116 von 128) (Englisch)

661207

116

Zoom out

Zoom in

Vorherige Seite

1/128

Nächste Seite

Troubleshooting

A-12

Set the bobbin in the bobbin case.

• Refer to “Cleaning the race” on page A-2.

If the needle is bent, replace it with a new one.

• Refer to “Replacing the needle” in the “Basic

operations” section.

Turn on the machine, and then press (Needle

position button) to raise the needle.

• Refer to “Upper Threading” in the “Basic operations”

section.

Thread the machine correctly.

• For details on threading the machine, refer to “Upper

Threading” in the “Basic operations” section.

■ Symptom 2: The upper thread is tangled, for

example, in the race, or fabric is caught in the

machine.

 Cause

Thread is tangled below the needle plate.

 Remedy

Remove the fabric and reset the thread and bobbin by

following the procedure below.

Turn off the machine.

Remove the fabric from the machine.

• Refer to “Fabric is caught in the machine and cannot

be removed” on page A-7.

Remove the upper thread and bobbin.

• Refer to “Fabric is caught in the machine and cannot

be removed” on page A-7.

Remove the bobbin case.

• Refer to “Fabric is caught in the machine and cannot

be removed” on page A-7.

If threads remain in the bobbin case, remove it.

• Refer to “Fabric is caught in the machine and cannot

be removed” on page A-7.

Insert the bobbin case so that the S mark on the

bobbin case aligns with the

z mark on the machine.

• Refer to “Cleaning the race” on page A-2.

Attach the needle plate cover.

• Refer to “Cleaning the race” on page A-2.

Set the bobbin in the bobbin case.

• Refer to “Cleaning the race” on page A-2.

If the needle is bent, replace it with a new one.

• Refer to “Replacing the needle” in the “Basic

operations” section.

Turn on the machine, and then press (Needle

position button) to raise the needle.

• Refer to “Upper Threading” in the “Basic operations”

section.

Thread the machine correctly.

• For details on threading the machine, refer to “Upper

Threading” in the “Basic operations” section.

■ Symptom 3: The needle breaks, or the needle

bends and thus hits the needle plate.

 Cause

You have not used the right combination of fabric, thread

and needle.

 Remedy

Choose a thread and needle that are appropriate for the

type of fabric.

• Refer to “Fabric/Thread/Needle Combinations” in the

“Basic operations” section.

■ Symptom 4: The fabric does not feed.

 Cause 1

The thread has become clogged as the stitch is too fine.

 Remedy 1

Lengthen the stitch length.

• Refer to “Setting the stitch width” and “Setting the

stitch length” in the “Basic operations” section.

 Cause 2

Feed dog is in down position.

 Remedy 2

Raise feed dog.

• Refer to “Free motion quilting” in the “Sewing”

section.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Presto BLMPR Seite 116

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Presto BLMPR

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info