Bedienungsanleitung Baby Lock Valiant - BMV10 (Seite 10 von 316) (Englisch)

661364

Zoom out

Zoom in

Vorherige Seite

1/316

Nächste Seite

1 Needle at the embroidering position

The needle is positioned over the hole in the

needle plate 2.

When starting the machine, the presser foot is

automatically lowered. The embroidery is sewn

and thread is pulled away from the material when

thread trimming and when changing thread colors

(moving to the different needles to be sewn within

the embroidery). When sewing is finished, the

machine stops. If the pattern uses eleven or more

thread colors, the machine will stop when it is

necessary for the thread spools to be changed, and

the corresponding instructions appear on the LCD.

(However, when “Manual needle bar sequences”

is set to “ON”, the machine does not automatically

stop when a thread spool must be changed. For

details, refer to “Selecting/Managing Thread Colors

for Each Needle Bar (Manual Color Sequence)” on

page 132.)

Differences from single-needle

machines

■ Can sew embroidery patterns using

ten or less colors without the need

to replace the thread spools

With single-needle machines, the thread spool must

be changed and the machine must be threaded each

time a different thread color is used. With this

machine, it is not necessary to change the thread

spool or rethread the machine with embroidery

patterns containing ten or less colors. If total colors

are less than ten colors, and if total color change is

more than eleven times, machine will come back to

the needle that the machine is already used and sew

the same color again automatically.

■ Automatic sewing reduces sewing

time

Except to change the thread spools with patterns

containing eleven or more colors, once the machine

is started, it continues to operate automatically, from

lowering the presser foot to performing the specified

operations at the starting and end positions in

addition to changing the thread colors. Since the

machine can change threads and finish stitching,

sewing time is reduced.

■ Automatically pulls and holds the

thread tails to the under side of

fabric at the beginning and end of

stitching

Since the machine automatically pulls the upper

thread under the fabric at the beginning of a color,

and pulls the upper thread from the fabric at the

time of thread trimming, you don’t need to deal with

the upper thread tail at all.

■ Automatically moves the embroidery

frame to the embroidering position

With a single-needle machine, in most cases, the

embroidery pattern is centered in the frame and the

fabric must be correctly positioned within the

embroidery frame with the center of the desired

embroidering position aligned with the center of the

embroidery frame. However, with 10 needle

embroidery machine, the embroidery frame is

moved to determine the embroidering position,

making it easier to sew the pattern at any place in

the frame. In addition, the embroidering position

can be freely determined manually as well as with

the camera positioning function after the fabric is

hooped and the embroidery frame is attached to the

machine, regardless of how the fabric is positioned

in the embroidery frame.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Baby Lock Valiant - BMV10 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Baby Lock Valiant - BMV10

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info