Bedienungsanleitung Babymoov Slick A010403 (Seite 7 von 28) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

715616

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

This product requires very little maintenance.

CLEANING AND MAINTENANCE MUST BE DONE SOLELY BY AN ADULT.

• The high chair has a resistant fabric cover which is completely removable and washable.

• To remove or replace the seat (A) cover, follow the instructions in the ‘USE’ paragraph.

• Caring for the seat (A) and reducer (G) fabric: machine washable at 30 °C. Ensure you remove the foam underneath the

reducer (G) before machine washing.

For added comfort, we recommend ironing the seat (A) fabric:

- fry iron below 90 °C: ensure you add a cloth between the seat fabric and the iron.

- Steam iron over 100 °C: ensure you add a cloth between the seat fabric and the iron.

• Clean plastic parts regularly with a damp cloth. Do not use solvents or other similar products.

• Protect the product from weather, water, rain or snow.

• Excessive exposure to the sun or heat may discover parts.

EInaj

MAINTENANCE AND CLEANING INSTRUCTIONS

5. Removable reducer (G)

The reducer can be removed from the seat (A) for machine washing, or can be removed when the product is being used as a

high chair.

There is foam in a pouch underneath the insert. Ensure you remove this foam before putting the insert in the washing machine

to avoid damaging it.

To put the reducer back in place, reposition the foam in the pouch located at the back of the reducer, then insert the harness

and the crotch post into the slots provided.

6. Tilting the seat (L)

To tilt the seat, pull the handle (L) located on the back of the seat (A) and tip the seat (A) backwards into the desired position.

The seat backrest can be tilted into 3 positions, including one in bouncer mode for newborns weighing up to 9 kg using the insert.

7. Height adjustment (F)

Simultaneously press the 2 buttons (F) located on each side of the seat to raise or lower the seat (A). There are 5 height

adjustment positions.

8. Fastening and unfastening the harness (K)

To unfasten the harness (K), press the central button (K5).

To fasten the harness (K), insert the buckle (K1) located at the hips into the buckle (K2) on the shoulder strap. Repeat on the other

side with buckles (K3) and (K4). Then insert the two shaped buckles on each side of the central buckle (K5).

9. Opening/closing the tray (E)

To open or close the tray, press the buttons (J) located on each side of the seat (A) then pull or push the tray. The tray (E) can

be opened or closed from either side.

To completely remove the tray, press the buttons (J) and pull the tray towards you on one side and then the other.

The tray is also dishwasher-safe.

10. Removing the crotch post (M)

To remove the crotch post, unscrew the two screws located underneath the seat (A) cover at the crotch post (M) using a cross-tip

screwdriver. Retain the screws so you can put the crotch post (M) back in place for a smaller child.

11. Adjusting the footrest (H)

Adjust the height of the footrest (H) depending on the size of the child. Simultaneously press the two buttons (I) located on each

side of the footrest, then raise or lower the footrest (H) to the desired height.

12. To remove the cover, unfasten the press-studs located on both sides of the seat (A) as well as those located underneath the seat

(A). Then pull the cover upwards carefully to avoid damaging it. To make it easier to remove the cover, pull the seat tilt button

(L) upwards. To put the cover back on, carefully position it on the seat so as to not to damage it. To make it easier to put the

cover on, pull the seat tilt button (L) upwards then slip on the cover. Finally, attach the cover using the press-studs located on

each side and underneath the seat (A) of the high chair.

13. Dismantling the product for storage

To dismantle the product, the seat (A) must first be separated from the frame (B). To do so, place the high chair in its highest

position, then use a thin screwdriver to press in the 2 slots located on each side of the frame (B) and pull the seat (A) upwards.

To completely remove the seat, use the height adjustment buttons

(F).

Finally, completely remove the tray (E) as well as the legs (C & D) by pushing the button located at the top of each leg.

USE

SLICK

• Instructions for use

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Babymoov Slick A010403 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info