8
en
Switching OFF the
appliance
To switch OFF the refrigeration and light,
turn the temperature selector (Fig.
2
/2)
to “O”.
Disconnecting the
appliance
If the appliance is not to be used for a
prolonged period, pull out the mains plug,
clean the appliance and leave the doors
open.
Switching ON the
appliance
Turn the temperature selector in the
refrigerator compartment to “O”. The
appliance begins to cool. The interior light
switches on when the door is opened
(Fig
2
/2).
Setting the temperature
To set the temperature, turn the temperature
selector to a setting (Fig.
2
/2).
The temperature can be adjusted steplessly.
Higher settings result in lower temperatures
in the refrigerator and freezer compartments.
We recommend the following temperature
settings:
– A low setting for short-term storage of
food in the freezer compartment (energy-
saving mode).
– A medium setting for long-term storage of
food in the freezer compartment and for
freezing fresh food.
Notes
●
The temperature in the refrigerator
compartment is influenced by the
ambient temperature, quantity and
temperature of the freshly stored food
and how often the door is opened. If
required, change the temperature setting.
●
While the refrigerating unit is running,
beads of water or hoarfrost form on the
rear of the refrigerator compartment; this
is quite normal. It is NOT necessary to
scrape off the hoarfrost or wipe off the
beads of water. The rear panel defrosts
automatically. The condensation is
conveyed down the drainage channel
(Fig.
6
/4) to the refrigerating unit where it
evaporates.
●
To prevent condensation in the area of
the freezer-compartment door seal, the
sides of the housing are partially heated.
Switching ON/OFF the appliance
