Bedienungsanleitung BandG Zeus 3 (Seite 133 von 142) (Englisch)

658656

133

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

Exporting the log file

The log file can be exported from the files dialog.

When you select the Log database you are prompted to select a destination folder and

filename. Once accepted, the log file is written to the chosen location.

RSD sentence output

The output of RSD NMEA 0183 message can be enabled (default off) to provide cursor

position information to an external device. The cursor position information may be used by

devices such as thermal cameras with pan-tilt ability, and external radar displays.

Note: The sentence format (dictated by NMEA 0183) was not written to take in to

consideration dual radar systems, and therefore does not transmit identification

information to distinguish between sources. When two radar PPIs are shown on the

screen at the same time, only the first (left hand) radar provides RSD information. RSD is

shown on the radar PPI to indicate this feature is enabled.

Software upgrades

The latest software is available for download from our website, www.bandg.com.

Before initiating an update to the unit itself, be sure to back up any potentially valuable user

data. Refer to "Backing up your system data" on page 134.

The system or the Network analyzer and service assistant can advise software updates are

available.

Network analyzer and service assistant

The system has a built-in service assistant that creates a report of the devices installed on the

NMEA 2000 and Ethernet network such as the software versions, serial numbers, and

information from the settings file to assist in technical support enquiries.

To use the analyzer, open the About page of the System settings dialog and select Support.

Two options are displayed:

Create report

Analyzes your network and prompts you for information required for support and creates the

report with information automatically gathered from the network. You can add screenshots

and log files that will be attached to the report. There is a 20MB limit for the report

attachments. You can save the report to a memory card and email it to support or upload it

directly if you have an internet connection. If you call technical support first, you can enter an

incident number to assist with tracking.

Check system for updates

Analyzes your network and checks if updates are available for compatible devices.

Note: Connect your unit to the internet to check for the latest available software

versions. The software versions will be up to date as of the last time you updated your

unit or connected to the internet.

Update software

Note: Remove any mapping cards from your unit and install a memory card with

sufficient storage before downloading software updates or creating and saving reports

to the memory card.

Note: Do not turn off the MFD or device until the update is completed or you are

prompted to restart the unit or device being updated.

1. If your MFD is connected to the Internet, you can download the software update from the

Updates Dialog into a memory card. You can also download the software update from

www.bandg.com to a memory card inserted in a smart device or PC connected to the

internet.

2. Insert the card containing the software updates in your MFD.

Maintenance| Zeus3 Operator Manual

133

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

BandG Zeus 3 Seite 133

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von BandG Zeus 3

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info