Bedienungsanleitung Bang Olufsen ADAPTIVE SOUND TECHNOLOGY (Seite 6 von 8) (Englisch)

637615

Zoom out

Zoom in

Vorherige Seite

1/8

Nächste Seite

Listening presets

>> Loudspeaker setup

Select the speakers to be activated in TV mode

and, if you have connected a projector, in

Cinema mode. You can also make up to ﬁve

customised listening presets, such as at the

dining table or in a favourite armchair. Select

three to seven* speakers and up to two

subwoofers to be activated for a preset and

determine the distance from your listening

position to three of the activated speakers.

For each customised listening preset it is also

possible to rotate the perceived sound 360

degrees around the listening position. The

default rotation is 0 degrees which is the

direction from your listening position to the

television.

If your speakers are placed correctly for your

listening positions, it is recommended that

you disable Adaptive Sound Technology and

set the speaker roles, distances and levels. If

you activate fewer than three speakers, you

must set the speaker roles, distances and

levels. For further information about speaker

roles, distances and levels, refer to the

chapters in the Guide about assigning roles

to speakers, setting the speaker distance, and

calibrating the sound level.

*A stereo speaker such as a BeoLab 7-1 or 7-2

counts as two speakers if fewer than six speakers

are activated.

To set speaker presets …

> Bring up the TV SETUP menu and select

OPTIONS.

> Bring up the SOUND menu and select

LISTENING PRESETS.

> Select TV, CINEMA or a custom preset ﬁeld.

> Enable or disable the Adaptive Sound

Technology.

> Activate the preferred speakers. Three to seven

speakers as well as up to two subwoofers can

be activated.

> Check that the Adaptive Sound Technology is

enabled or disabled as you desire.

> Store to bring up the next menu. If you have

selected OFF to disable the Adaptive Sound

Technology, refer to the chapters in the Guide

about how to assign roles to speakers, set the

speaker distances and calibrate the sound level.

> Enter the horizontal distance in metres between

your listening position and each speaker making

a sound.

> If you are setting a customised preset and

ADAPTIVE SOUND TECHNOLOGY is enabled,

highlight ROTATION and select how much the

sound stage should be rotated. A sound will be

produced from the setup if a source is playing

and you rotate until the sound is experienced

from the desired direction.

> Store and return to the LISTENING PRESETS

menu. During ﬁrst-time setup, press the green

button to continue the ﬁrst-time setup

procedure when you have created the desired

presets.

Example of a listening position for watching tele-

vision and Home cinema. You select which speakers

should be active for each situation.

CINEMA

NOTE! If you have changed the rotation of a

preset during daily use, you can easily create a

new preset with these settings. Enter the

LISTENING PRESETS menu, select an empty

PRESET ﬁeld and press the centre button for each

menu, as the current settings will automatically be

applied to each of these menus.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen ADAPTIVE SOUND TECHNOLOGY Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen ADAPTIVE SOUND TECHNOLOGY

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info