Bedienungsanleitung Bang Olufsen Beocenter2 (Seite 10 von 28) (Englisch)

35768

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

Tune in and edit radio programs

Let the music system find available

radio programs for you. You can

store up to 99 radio programs.

Once a program is stored, you access

it directly by keying in the program

number or by stepping through all

the stored programs.

You can rearrange the order in which

tuned radio programs appear or

delete them via the MOVE

PROGRAM or DELETE PROGRAM

menus.

A name, transmitted by the

broadcaster, may be shown in the

display, but you can name the radio

programs yourself.

To store an added program, you must

enter the STORE PROGRAM menu.

If your music system is equipped with the

built-in DAB module and DAB programs

are broadcast in your area, you can store

digital radio programs as well.

To enter the RADIO menu, press LIST, enter the

SETUP menu and then enter the RADIO menu.

What’s on the RADIO menu …

AUTO TUNING … Use this menu to tune in all

radio programs automatically. Only FM and DAB

programs can be tuned in automatically.

UPDATE TUNING … Use this menu to tune in

new DAB programs. For further information,

refer to the description on the opposite page.

MOVE PROGRAM … Use this menu to change

the order in which your tuned radio programs

appear.

DELETE PROGRAM … Use this menu to delete

unwanted radio programs from the list of avail-

able programs.

ADD PROGRAM … Use this menu to add new

programs, name and store an added program.

EDIT PROGRAM (1–99) … Use this menu to ﬁne

tune programs, name and store the relevant

programs.

In the TUNE menu, accessible via both the ADD

PROGRAM and EDIT PROGRAM menus, you can

press

and to move between options, and

press

or to change settings for an option.

The options that are available depend on which

band you are currently listening to: FM, AM or

DAB. For example, the options for TUNE in the

ADD PROGRAM menu for FM are:

FREQUENCY … Shows the current frequency.

Press

or to start tuning.

BAND … Shows the current band. Select FM, AM

or DAB.

FINE … Fine-tune a tuned station.

STEREO … Select YES for stereo sound.

DAB AERIAL ADJUSTMENT … This menu

contains an indicator bar. The length and colour

of the bar indicate the strength of DAB signal

reception and the risk of signal drop-out. Watch

the indicator bar while you adjust your aerial.

There is no sound while you adjust the aerial.

– The indicator bar extends rightward if signal

strength increases, and reverses direction if it

decreases.

– The indicator bar moves through a grey and a

white ﬁeld. The grey ﬁeld to the left indicates

that there is a signiﬁcant risk of periodic signal

drop-out. The white ﬁeld to the right indicates

that the risk of signal drop-out is minimal.

Note that you must select a channel number with

a signal before adjusting the aerial. Check your

DAB broadcasters’ websites for channel numbers.

. . RADIO

1 AUTO TUNING …

2 UPD

ATE TUNING …

3 MOVE PROGRAM

…

4 DELETE PROGRAM

…

5 ADD PROGRAM

…

6 EDIT PROGRAM

…

DAB AERIAL ADJUSTMENT

DAB DRC

1 PROGRAM

…

99 PROGRAM 99

1 TUNE [FREQ, FM …]

2 NAME PROGRAM

3 STORE PROGRAM

1 TUNE [FREQ, FM …]

2 NAME PROGRAM

3 STORE PROGRAM

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen Beocenter2 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen Beocenter2

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info