38
You choose whether or not to
activate the PIN code system. The use
of a PIN code means that if your
music system has been disconnected
from the mains for more than
approximately 30 minutes, it can
only be activated again by switching
it on and keying in your own
personal PIN code via the close-up
operation panel.
If the PIN code is not entered, the music
system automatically switches to standby
after 3 minutes.
If a wrong PIN code is entered, you get
five attempts to key in the code, after
which the system is switched off and
cannot be switched on for 3 hours.
You can change your PIN code, however,
for security reasons it is only possible to
change the PIN code five times within a
period of 3 hours.
Should you forget your PIN code, please
contact your Bang & Olufsen retailer who
can assist you in receiving a Master code
from Bang & Olufsen. You need the Master
code to reactivate your music system.
Set and enter a PIN code
Enter the PIN code
The cue PIN _ _ _ _ is displayed
Key in your personal PIN code.
The PIN code is not displayed
When the four-digit code has
been entered, the display returns
to the relevant source e.g.
RADIO 1
When the PIN code system is activated and the
music system has been disconnected from the
mains for more than approximately 30 minutes,
the indicator light will flash to show that the
system must be switched on and the PIN code
entered via the close-up operation panel.
PIN
_
_ _ _
0 – 9
PIN
*
_
_ _
PIN
****
RADIO 1
Activate the PIN code system
Press twice when the system is in
standby
Press to key in a four-digit PIN
code of your own choice.
NEW PIN appears briefly, and
PIN _ _ _ _ appears
Key in a four-digit PIN code of
your own choice. The PIN code is
not displayed
Press to store the PIN code.
CONFIRM appears briefly, and
PIN _ _ _ _ appears
Re-enter your code.
The PIN code is not displayed
Press to store. STORED appears,
indicating that your PIN code is
stored
ss
STOP
NEW PIN
PIN
_
_ _ _
0 – 9
PIN
*
_
_ _
PIN
****
GO
CONFIRM
PIN
_
_ _ _
0 – 9
PIN
****
GO
STORED
NOTE! If a wrong code is entered the second
time, the cue ERROR appears in the display,
and you must enter the code again.
