Bedienungsanleitung Bang Olufsen BeoVision Avant 85 - 2016 (Seite 17 von 120) (Englisch)

704893

Zoom out

Zoom in

Vorherige Seite

1/120

Nächste Seite

the red button in the on-screen help and find 'Picture settings' for more information.

Connect a camera

1. Connect the cable to the appropriate socket on the camera.

2. Run the cable to an HDMI IN socket on the television.

3. Follow on-screen instructions to configure the source.

Connect a computer

Before you connect a computer, you must disconnect the television, the computer and all

connected products from the mains supply.

1. Using the appropriate type of cable, connect one end to the DVI or HDMI output

socket on your computer, and the other end to an HDMI IN socket on the

television.

2. If you use the DVI output socket on the computer, use the appropriate cable and

connect the sound output on the computer to the L/R IN socket on the

television to hear sound from the computer in the speakers connected to the

television.

3. Reconnect the television, the computer, and all connected products to the

mains. Remember, the computer must be connected to a grounded wall outlet

as specified in its setting-up instructions.

4. Follow on-screen instructions to configure the source.

Connect an analogue audio source

You can connect one analogue audio source, such as an Mp3 player. To configure

products connected to the television, press the red button in the on-screen help and find

'Set up connected products'.

Disconnect all systems from the mains before you connect additional products.

1. Connect the cable to the appropriate socket on the product you wish to

connect.

2. Run the cable to the L/R IN socket on the television.

3. Reconnect the television and the connected products to the mains.

4. Follow on-screen instructions to configure the source.

Different adaptors and possibly also cables are needed. Cables and adaptors are

available from your Bang & Olufsen retailer.

IR-transmitters

To operate non-Bang & Olufsen products with a BeoRemote One or the BeoRemote App,

attach a Bang & Olufsen IR-transmitter on your non-Bang & Olufsen product and then

connect it to one of the sockets marked PUC on the connection panel. Attach the

transmitter near the IR-receiver on the connected product to ensure remote control

operation. Before attaching the transmitter permanently, check that you can operate the

product menus on the TV screen using BeoRemote One or BeoRemote App. Operation

of your television with the BeoRemote App may not be available in the current software

version.

When you set up the transmitter to a selected PUC socket in the Source list menu,

settings for the IR-transmitter are made automatically. However, it is possible to perform

a manual setup of the socket if alternative settings are required.

For an extra PUC cable, contact your Bang & Olufsen retailer.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen BeoVision Avant 85 - 2016 Seite 17

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen BeoVision Avant 85 - 2016

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info