The SETUP menu is part of the
complete menu system of the
DVB Module. The SETUP menu
contains sub-menus that you can
use to make your own settings,
enter information on your
current setup and make channel
tuning.
The ACCESS CONTROL menu
within the SETUP menu allows
you to restrict access to particular
channels and stations and set a
maturity rating.
Not all markets have the options
of both cable and terrestrial at
the same time.
Depending on the type of
module you have, the functions
will vary.
In order to bring up the SETUP menu
for TV channels, you must be in TV
mode, and in order to bring up the
SETUP menu for Radio stations, you
must be in Radio mode.
Depending on your programme
provider, some settings are made
automatically.
Setup menu
The Channels and Stations menus
You can store digital TV channels and
digital radio stations. Once you have
tuned in the channels and stations, you
can edit the Channel and Station Lists.
This means that you reduce the time you
spend looking for specic channels and
stations by creating favourite groups.
You can make up to ten different
Channel Groups and ten Station Groups
containing only the channels and
stations you choose, and you can name
each of these Groups.
TUNING…
TERRESTRIAL
> Press Setup to bring up the DVB SETUP
menu. (Beo4: Press MENU then 4).
> Press the centre button to bring up the
CHANNELS/STATIONS menu.
> Use the navigation button up or down to
highlight TUNING and press the centre
button.
> Select TERRESTRIAL and press the centre
button.
> ACTIVE ANTENNA is highlighted. Use the
navigation button left or right to indicate
active antenna. Options are ON and OFF.
> Use the navigation button down to
highlight SEARCH FILTER and left or right
to select which channels to search for.
Options are FREE (excludes pay-channels)
and ALL.
> Use the navigation button down to
highlight SEARCH MODE and left or right
to select automatic or manual search. If
you select manual search, see ‘If you have
chosen manual tuning’ under
‘TERRESTRIAL’. Otherwise…
> …press the centre button to start the
search.
> Press and hold BACK to leave the menu.
If you have chosen manual tuning …
> Use the navigation button down to
highlight FREQUENCY, if you have set
SEARCH MODE to MANUAL. Use the
number buttons to enter a frequency and
use the navigation button left or right to
step back and forth.
> Use the navigation button down to
highlight BANDWIDTH and left or right to
select the bandwidth.
> Use the navigation button down to
highlight CHANNEL NUMBER ID and left
or right to select a channel number ID.
> Use the navigation button down to
highlight CHANNEL NUMBER and left or
right to select a channel number.
> Press the centre button to start the
search.
> Press and hold BACK to leave the menu.
11
