Bedienungsanleitung Bang Olufsen DVB-S (Seite 10 von 20) (Englisch)

475204

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Contents of the Installation menu…

LNB/Aerial Setup

The LNB/Aerial setup menu is used for selecting

the options corresponding to your antenna/aerial

setup:

DiSEqC switch… Enable or disable the DiSEqC

switch.

Use LNB… Determine which LNB to use.

Satellite… Select which satellite to use – the

satellite the chosen LNB is directed at.

Frequency… Set the frequency, if different from

the preset value.

Symbol Rate… Set the symbol rate to be used, if

different from the preset value.

Polarisation… Select the polarisation of the LNB, if

different from the preset value.

Program Search

In the Program Search menu, you set your

preferences for a program search:

LNB… Select which LNB to use for a program

search.

Search Filter… Select whether the satellite should

search for all channels or free to air channels

only.

Search Mode… Select either automatic or manual

program search.

Frequency… If you have chosen manual search,

you can enter a search frequency.

Symbol Rate… If you have chosen manual search,

you can set a symbol rate value.

Polarisation… If you have chosen manual search,

choose either horizontal or vertical polarisation.

Network Search… If you have chosen manual

search, you can search for all programs found in

a speciﬁ c network by choosing ‘on’.

The installation menu is used when you want

to change your satellite setup, for example, if

you add a new LNB to your setup. It is also

used to search for satellite programs and to

ﬁ nd information about your satellite module.

It is important that you check the signal

strength and quality in the LNB Aerial setup

menu when you make the appropriate settings.

The signal quality must be at least ‘good’ and

the signal strength must be at least 20.

When you make a manual search for satellite

programs, you can make speciﬁ c settings for

the search. Programs found by means of a

manual search will be placed at the bottom

of the list of all tuned programs.

Note that if you reinstall all programs, your

Program Lists and Favourite Lists are reset, and

the contents of the Favourite Lists are removed.

Reinstall

In this menu you can reinstall all programs. Note

that this will delete the settings you have made for

program lists and Favourite Lists. You can stop the

scan for new programs by pressing STOP. You can

then make your own settings for a program

search, for example, to make individual program

searches for each LNB.

Edit Satellite Settings

Use this menu to change settings for a chosen

satellite. For example, you can add a new satellite

to the list of available satellites. Four satellites are

preset from the factory; Thor, Astra, Hotbird and

Sirius.

Module Information

Use this menu to see the current module version.

Also if new software has been downloaded, which

affect the operation of the satellite module, it will

be stated in this menu.

If required a guide update can be found at the

Bang & Olufsen web-site: www.bang-olufsen.com.

>> Setup menu

About the Installation menu…

NOTE! When you enter the LNB/Aerial setup menu

from radio mode, the satellite module changes to

TV mode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Bang Olufsen DVB-S Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Bang Olufsen DVB-S

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info