Bedienungsanleitung Barbas EVO-7 65-40 Opti-Air (Seite 21 von 36) (Englisch)

812712

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Caution:

Continuous firing with the primary air inlet fully open (control lever in the far

right position) causes a white-hot fire that can damage the appliance. Use the

primary air only during the first fuel load and for ignition of a new fuel load.

6.3.4 General firing tips

• The appliance works best when it has heated up as described in section

6.3.1

Insufficient heating up leads to a low chimney draught, black deposits on the glass

and incomplete combustion. Good combustion is recognized by bright orange flames,

invisible smoke and no soot deposits on the glass. Use the control lever to get good

combustion. Refer to section

5.1

for advice on the required fuel quality.

• Make sure the door of the appliance is closed when in use. Only open the door for

ignition and to refuel.

• Do not remove all the ashes. An ash layer in the combustion chamber forms a heat

insulating layer, that helps the fuel to ignite easy.

• Do not set the control lever in the far left position (all combustion air inlets closed)

when the appliance is used. This will cause severe smoke development, soot

formation and increases the chance of a chimney fire.

• After the first load, do not overload the appliance with fuel. Refer to section

5.2.1

for

the recommended amount of fuel. Too much fuel leads to incomplete combustion,

soot formation and a chance of a chimney fire.

6.4 Firing the appliance with the optional Barbas Opti-Air system

If the appliance has the optional Opti-Air system, the appliance automatically controls the

amount of combustion air. With the Barbas Opti-Air app for Android and iOS it is possible

to select from 5 different combustion levels or to select room temperature control.

Refer to section

3.2

for a detailed description of the Opti-Air system.

6.4.1 Installation of the Opti-Air app

1. Download the Barbas Opti-Air app from Google Play (Android) or the App Store

(iOS) and install it on your mobile phone or tablet.

2. Start the Barbas Opti-Air on your mobile device.

3. Make sure bluetooth is on and can recognize other devices.

4. Start to make a connection with bluetooth with device Airmaster.

5. When asked, enter the PIN code 000000.

6. The app is now ready for use.

Note: It is possible to install the Barbas Opti-Air app on multiple mobile

devices. However, the app can only be active on 1 mobile device at the same

time. Before making connection between the appliance and a second mobile

device, disconnect the bluetooth connection between the appliance and the

first mobile device.

6.4.2 First load and ignition with Opti-Air

During operation, the Opti-Air system only works with closed door. Only open the door for

a short time for ignition and reloading with fuel.

Warning:

Do not use the appliance when there is fog or haze or no wind.

Operation

EVO-7 65-40 21

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Barbas EVO-7 65-40 Opti-Air Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Barbas EVO-7 65-40 Opti-Air

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info