Pag. 8
USE AND MAINTENANCE MANUAL
GB
In the second dial the display shows the set value in seconds; it is
possible to increase or decrease the switching time through L and G
push-buttons.
Note: The point indicates ½ second.
Rinse aid
Once the detergent has been adjusted press push-button "A" once
again to pass to the following item and to display "bL" rinse aid. Press
push-buttons "L" and "G" to increase or decrease the switching time.
CHAP.3 SAFETY RECOMMENDATIONS
3.1 RESIDUAL RISKS AND WARNINGS
• Never open the door quickly if the cycle has not finished.
• Do not put bare hands into the wash solution.
• Never remove the machine panels if the power upline has not been turned off.
• The professionally trained personnel who install the machine and connect the
electricity, will explain to the user how to operate the machine and which safety
measures to use.
• The installer will provide practical demonstrations and leave written instructions which are
provided with the machine.
• This machine is only to be used for the purpose for which it was
designed. Any other use is considered improper and dangerous.
• The machine is not to be used by untrained personnel.
• Never use the machine if any of the protections (microswitches, panels or other)
provided by the manufacturer are missing.
• Do not use the machine to wash objects not compatible with those indicated by the
manufacturer.
• All repair work must be done by the manufacturer or an authorized service center
using original spare parts.
• Failure to observe this may affect the safety of the machine.
• The power supply should be turned off when the machine is not being used.
• Never put magnetic items close to the machine.
• Never use the machine if not provided with the filters in the tank.
3.2 NORMAL SERVICE CONDITIONS
Ambient Temperature : 40°Cmax /4°Cmin ( average 30°C)
Altitude : until 2000 metrical
Relative humidity : max 30% at 40°C / max 90% at 20°C
Transport and Storage : between -10°C and 55°C with peack until 70°C ( max 24 hrs )
