Bedienungsanleitung Basetech 1528582 (Seite 4 von 6) (Deutsch, Englisch, Holländisch)

738500

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Preparation

Type labels in different languages are included in the package. Stick the language label in your

language over the German language label on the countdown timer.

Connecting a device to the countdown timer

• Set the desired time on the countdown timer (see next chapter).

• Switch off the device that you want to connect to the countdown timer (provided it has an

on/off switch).

• Plug the device into the outlet of the countdown timer, inserting the plug all the way.

• Switch the device on.

• Depending on the position of the setting ring on the countdown timer, the connected device

is switched on. The device is switched off automatically after the set countdown time expires.

Should the timer stop earlier than expected, slowly turn the setting ring to the right

(clockwise) until the arrow “ ” inside the ring points to the position “OFF”. The

countdown timer and the connected device are switched off.

Setting the countdown time

Turn the outer setting ring with the printed time division‘s clockwise (paying attention to the

arrows on the outer edge of the ring) until the arrow “ ” inside the ring indicates the desired

countdown time. The outlet as well as the connected device are switched on automatically.

Turn the setting ring only to the right (clockwise), it can be moved easily.

It is not possible to turn it anti-clockwise! Do not exert any force as this will destroy

the countdown timer and void the warranty!

The countdown timer only works when it is supplied with electricity, i.e. when it is connected to

an active mains socket.

Once the set countdown time has expired, the connected device as well as the countdown

timer are switched off. The arrow “ ” inside the ring points to the position “OFF”.

If you wish to start a new countdown, proceed as described above.

Care and cleaning

Before cleaning the product, disconnect any device from the countdown timer. Disconnect then

the countdown timer from the power supply by pulling it out completely from the mains socket.

Never use abrasive cleaning agents, cleaning alcohol or other chemical solutions, since these

could damage the housing or even impair operation.

Use a dry, lint-free cloth to clean the product.

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Please dispose of the product, when it is no longer of use, according to the

current statutory requirements.

Technical data

Operating voltage ....................................230 V/AC, 50 Hz

Connection power ....................................Ohmic load: max. 3680 W (230 V/AC, 16 A)

.................................................................Inductive load: max. 460 W (230 V/AC, 2 A)

Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.

Powered devices with inductive load are, e.g., engines, control gears, conventional

transformers, energy-saving bulbs, etc.

Protection type .........................................IP20

Switch type ..............................................Microswitch (single-pole)

Countdown time range ............................1 - 60 minutes

Socket with child protection .....................yes

Ambient conditions .................................. Temperature 0 °C to +55 °C, air humidity 0% to 85%

relative, non-condensing

Dimensions .............................................. 82 x 81 x 78 mm (L x W x H, including plug)

Weight .....................................................130 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Basetech 1528582 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info