Bedienungsanleitung Basetech 1528590 (Seite 4 von 6) (Deutsch, Englisch, Holländisch)

738538

Zoom out

Zoom in

Vorherige Seite

1/6

Nächste Seite

This is a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).

All rights including translation reserved. Reproduction by any method, e.g. photocopy, microlming, or the capture in

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.

This publication represent the technical status at the time of printing.

Preparation

Type labels in different languages are included in the package. Stick the language label in your

language over the German language label on the Weekly timer.

Choose between continuous operation and switch operation

On the side of the Weekly timer, there is a slide switch for selecting the desired type of opera-

tion:

Position “ ” The socket is permanently switched on; settings on the Weekly timer are not

important

Position “ ” The socket is automatically switched on or off via the Weekly timer according to

the existing settings

Setting the time

Turn the outer setting ring with the imprinted times of day clockwise (observe the large arrow

on the inner ring), until the symbol “ ” on the inner ring shows the current time and date of

the week.

Turn the setting ring only clockwise; it can be moved easily.

It is not possible to turn anti-clockwise! Do not exert any force! If the Weekly timer is

damaged due to that, the warranty will be void!

The Weekly timer only works when it is supplied with electricity, i.e. when it is connected to an

active mains socket.

Setting the on/off times

With the segments on the on the edge of the setting ring (96 shift segments for 7 days), you can

set the times for switching on or switching off.

A segment when pressed down activates the socket (mains voltage existing); a segment when

pushed upwards or pulled out switches the socket off (no voltage, the connected device is off).

Example: If a connected appliance should be switched on between 6 and 10 o‘clock every

weekday, press the segments between 6 and 10 o‘clock downwards every weekday. All the

other segments must be pulled out.

There is labelling of the weekdays on the setting ring (in the English language):

Labelling on the setting ring Weekday

MONDAY Monday

TUESDAY Tuesday

WEDNESDAY Wednesday

THURSDAY Thursday

FRIDAY Friday

SATURDAY Saturday

SUNDAY Sunday

With the design of the Weekly timer (mechanical drive and switching process;

96 shift segments for 7 days), deviations from the switching times occur.

For that reason, the electronic Weekly timer should be used instead for switching

processes or switching times that require accuracy.

The mechanical Weekly timer has, however the great advantage that a setting can

be made very quickly.

Connecting a device to the Weekly timer

• Switch the device off.

• Plug the device to the socket of the Weekly timer; push the plug completely into the socket

of the Weekly timer.

• Switch the device on.

• If the slide switch for the type of operation is in the position “ ”, the socket of the Weekly timer

is thus switched off permanently.

If the slide switch for the type of operation is in the position “ ”, the socket of the Weekly

timer is automatically switched on or off depending the segments on the setting ring.

When the socket on the Weekly timer is activated, a red LED on the front side of the

Weekly timer lights up.

Care and cleaning

Before cleaning the product, disconnect the appliance from the Weekly timer. Disconnect then

the Weekly timer from the power supply by pulling it out of the mains socket.

Never use abrasive cleaning agents, rubbing alcohol or other chemical solutions, since these

could damage the housing or even impair operation.

Use a dry, lint-free cloth to clean the product.

Disposal

Electronic devices are recyclable material and do not belong in the household

waste. Dispose of an unserviceable product in accordance with the relevant statu-

tory regulations.

Technical data

Operating voltage .................................230 V/AC, 50 Hz

Connection power .................................Ohmic load: max. 3680 W (230 V/AC, 16 A)

..............................................................Inductive load: max. 460 W (230 V/AC, 2 A)

Devices with mainly resistive load are, e.g., light bulbs, heaters, etc.

Powered devices with inductive load are, e.g., engines, control gears, conventional

transformers, energy-saving bulbs, etc.

Protection type ......................................IP20

Switch type ...........................................Microswitch (single-pole)

Smallest switchable time unit ...............1h 45min (96 shift segments for 7 days)

Enhanced protection against

accidental contact ................................. yes

Ambient conditions ............................... Temperature 0 °C to +40 °C, air humidity 20% to 85%

relative, non-condensing

Dimensions ........................................... 121.5 x 74.5 x 76 mm (L x W x H, including plug)

Weight ..................................................166 g

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Basetech 1528590 Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info