6 Main switch and rst heating power level (400 W)
7 Switch for second heating power level (400 W)
8 Switch for third heating power level (400 W)
9 Switch for oscillation mode
10 Rod-shaped halogen bulb
11 Honeycombed grill
Now insert the mains plug into a mains socket for the public supply grid.
Y2.
level (400 W) is activated.
Y off
mains plug from the mains socket after you switch the halogen heater off.
By
(W is watts)
If
the right.
The halogen
if it falls over
If 7.
at and stable surface and whether the switch of the safety device is jammed.
Cleaning and maintenance
Observe the safety instruction for this and pull the mains plug out of the
socket.
Before
housing can be
the coating.
using the heater
Disposal
In
health
unserviceable product to relevant facilities in accordance with statutory regulations.
The
and not as municipal waste.
T
Operating voltage: 230 V/AC, 50 Hz
Power consumption: max. approx. 1200 watts
1. level: 400 watts, 2. level: 400 watts, 3. level: 400 watts
Declaration of conformity
We
product complies
1999/5/EC. Y
V
Halogen Heater
Item no. 56 1
Intended Use
This halogen
pressing a button, the halogen heater
optimal heating
therefore
halogen heater
or
moisture, heavy soiling or overheating.
Unauthorised
and
damage
Please read the operating instructions thoroughly and keep them for further reference.
Delivery content
Halogen heater•
Stand•
2 x screws•
Operating instructions•
Safety instructions
We
if
failure to observe these operating instructions. The warranty will then expire!
The icon with exclamation mark indicates important information in the
operating
operating the device, otherwise there is risk of danger
Do not cover the device (e.g.
of the device.
Persons / Product
The •
children are
and into
eye
a re by knocking the heater over or covering it up.
Do
will not be
air inlets and
e.g.
walls or other objects when in operation.
Never •
cooled down (risk of burns).
Do not insert any •
shock).
On commercial premises, the relevant accident prevention regulations of the relevant •
professional
observed.
Never •
happen, pull the mains plug out of the socket immediately and contact an expert.
Always unplug the power plug from the mains socket before cleaning the device.•
The product must not be subjected to heavy mechanical stress.•
The •
or dampness.
Before using •
matches the voltage specied on its nameplate.
Check both the halogen heater as well as the connection cable for damage from time to time.•
Place •
heater
Do not use a double adapter or a similar device to connect the heater to the mains.•
Never •
environment. The condensation water that develops may destroy the heater
reach room temperature before turning it on.
Never pull •
does not get caught somewhere
Do not wind the connection cable around the heater
Do not use •
or could be combustible gases, vapours or dust.
If •
out of operation immediately and secure it against inadvertent operation. It must be assumed
that safe operation will no longer be possible if
There is visible damage to the halogen heater
The halogen heater no longer functions
The heater has been stored for a long period of time under unfavourable conditions
The heater may have been subjected to considerable stress during transportation.
Miscellaneous
Servicing, adjustment or repair works must only be carried out by a specialist/ specialist •
workshop.
Live cover is opened or if components are removed. •
T may also be live. Before maintenance, repair work or
assemblies,
and
with the hazards involved and with the relevant regulations.
If any •
Advisory Service or other experts.
Assembly
Before assembling the halogen heater
mains power
The 1.
diagram to help you when assembling the heater
The stand can best be mounted when the heater is lying on its back.
Remove
middle of the stand and attach the stand.
Secure the stand on the heater by tightening the two screws.
1 Housing
2 Stand
3 Fastening screws (2 pieces)
4 Safety device
5 Power supply cable
Operation
Always place the halogen heater on a rm, at and stable surface.
Never operate the halogen heater without the honeycombed grill.
If
clean and dry place.
The heater must not be used near bathtubs, showers, swimming pools or
washbasins. not be possible to you are in
contact with water
Do not position the device right underneath a mains outlet.
Do not operate the device in conjunction with a timer separate remote
control system or other equipment which turn heating
automatically
or positioning it otherwise incorrectly
These operating instructions are published by Conrad Electronic SE,
Klaus-Conrad-Straße 1, D-92240 Hirschau/Germany
All rights including translation reserved. Reproduction by any method, e.g. photocopy
capture in electronic data processing systems require the prior written approval by the editor
in part, is prohibited.
The operating instructions reect the current technical specications at time of print.
We reserve the right to change the technical or physical specications.
© 2010 by Conrad Electronic SE.
*02_02/10_03-SB
