Bedienungsanleitung Batavia BT-CB001 7063096 (Seite 9 von 30) (Deutsch, Englisch, Holländisch, Französisch)

759819

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

English

• Always make sure to have a safe stand

while working with the device.

• Do not overload the device during work.

Do not block the blower outlet and the

suction inlet while working with the

device.

• Make sure long hair or loose clothing

cannot get into the openings of the

device.

• In dusty locations, it is advisable to

slightly dampen the surface with a

suitable spraying device to avoid too

much dust.

• In case of stubborn soiling, it is advisa-

ble to loosen the surface with a rake or

broom.

• After operation, remove the battery

from the device to avoid unintentional

switching on.

9. LED

• To switch on the LED, press the button

(8) once.

• To switch off the LED, press the button

again.

10. Turnable handle

The handle can be locked in 2 working

positions.

To avoid unintentional operation, of the

device, remove the battery!

10.1 To adjust the working position of the

handle, slide the handle unlock button

(4) forwards and simultaneously turn

the blower to the side.

10.2 Turn the handle until you hear a click

sound and the handle is properly locked

in this position.

11. Speed regulator

Thedeviceisequippedwithaninnitely

adjustable speed regulator (6).

11.1 When starting work, adjust the speed

regulator to the lowest setting for low

air volume.

11.2 Turn the speed regulator in direction to

the highest setting 7, according to the

desired application.

12. Assembly – Operating as vol-

ume pump

12.1 Toinatewatertoys(e.g.waterballs),

mount the nozzle holder (10) on the

blower outlet (3) of the device.

12.2 Insert the suitable nozzle (11) into the

nozzle holder (10).

12.3 Make sure the nozzle holder is properly

locked in the blower opening.

• Donotleavetheinatingobject

unattended!

• The device does not switch off auto-

matically.Thustheobjecttobeinated

can burst.

13. Assembly – Extracting clean air

13.1 For extracting clean air from an object,

e.g.fromaninatedairbed,mountthe

suitable nozzle (11) on the suction inlet

(9) and switch on the device.

13.2 Do not leave the device unattended

during work.

14. Maintenance and cleaning

WARNING: Always disconnect from the

mains power supply, before carrying out any

maintenance/ cleaning of the charger.

Remove the battery before carrying out any

maintenance/ cleaning of the tool.

14.1 Maintenance

There are no inner parts of the tool which

need maintenance.

14.2 Cleaning

• Keep safety devices, ventilation open-

ings and the motor housing as free as

possible from dirt and dust. Rub the

electric power tool with a clean cloth or

blow over it with low pressure com-

pressed air.

• We recommend that you clean your

electric power tool immediately after

each use.

• Clean the electric power tool regularly

with a damp cloth and somewhat soft

soap.

Do not use any cleaning or solvent materi-

als; these can attack the device’s plastic

components. Make sure that no water can

get inside the electric power tool.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CB001 7063096 Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info