757196

Batavia BT-CHT002 - 7062516 Seite 7

7
Zoom out
Zoom in
Vorherige Seite
1/16
Nächste Seite
English
8 9
English
MAINTENANCE AND CLEANING
WARNING: Always disconnect from the mains
power supply, before carrying out any mainte-
nance/ cleaning of the charger. Remove the
battery before carrying out any maintenance/
cleaning of the tool.
Maintenance
There are no inner parts of the tool which need
maintenance.
Cleaning
• Keep safety devices, ventilation openings
and the motor housing as free as possible
from dirt and dust. Rub the electric power
tool with a clean cloth or blow over it with
low pressure compressed air.
• We recommend that you clean your elec-
tric power tool immediately after each use.
• Clean the electric power tool regularly with
a damp cloth and somewhat soft soap. Do
not use any cleaning or solvent materials;
these can attack the device’s plastic com-
ponents. Make sure that no water can get
inside the electric power tool.
• The cutters should be cleaned and lubri-
cated at regular intervals in order to ensure
best performance at all times. Remove
deposits with a brush and apply a thin lm
of oil.
TECHNICAL DATA
No Load Speed. . . . . . . . . . . 2200 min-1
Cutter rail length . . . . . . . . . . . 450 mm
Total blade length. . . . . . . . . . . 510 mm
Max. cutting capacity. . . . . . . . ø14.5 mm
Weight . . . . . . . . . . . . . . . . . 2.1 kg
Sound Pressure Level LpA . . . . .75.19 dB(A)
Uncertainty KpA . . . . . . . . . . . . . . 3 dB
Sound Power Level LWA . . . . . .86,19 dB(A)
Uncertainty KWA. . . . . . . . . . . . . . 3 dB
Hand Arm Vibration. . . . . . . . .0.933 m/s2
Uncertainty K. . . . . . . . . . . . . 1.5 m/s2
Vibration level
The vibration emission level stated in this
instruction manual has been measured in
accordance with a standardised test given in
EN 60745; it may be used to compare one tool
with another and as a preliminary assessment
of exposure to vibration when using the tool for
the applications mentioned.
– using the tool for different applications, or
with different or poorly maintained
accessories, may signicantly increase the
exposure level
– the times when the tool is switched off or
when it is running but not actually doing
the job, may signicantly reduce the
exposure level
Protect yourself against the effects of vibration
by maintaining the tool and its accessories,
keeping your hands warm, and organizing your
work patterns.
DISPOSAL
Do not dispose of electric power
tools with domestic refuse.
The electric power tool is shipped in
packaging to reduce transport damage. This
packaging is a raw material and as such can
either be reused or can be fed back into the
raw material cycle. The electric power tool and
its accessories are made from various materi-
als such as metals and plastics. Take defective
components to a special refuse collection
point. Ask about these at your specialist shop
or local council. The product and the user
manual may be subject to changes. Technical
data may be changed without prior notice.
Batteries
Think of the environment when disposing of
batteries. Contact your local authorities to nd
out where your nearest disposal area is.
Do not dispose of batteries with domestic
refuse.
Do not dispose of by burning, risk of explosion.
BEFORE FIRST USE
Remove the machine and the accessories from
the packaging. Check the machine for trans-
port damage and do not use the machine in
case of damages. Keep the packing materials
away from children, risk of suffocation!
INTENDED USE
Battery-powered, portable, light-duty garden
tool for cutting and trimming soft, new growth
of hedges, bushes and shrubs. The device is
unsuitable for cutting thicker branches, hard
wood or other materials.
WARNING: If this device is used for any other
purpose, there may be a risk of damage to the
hedge trimmer or serious injury to the user.
UNPACKING YOUR TOOL
• Carefully unpack and inspect your new
tool. Familiarise yourself with all its fea-
tures and functions.
• Ensure that all parts of the tool are present
and in good condition. If any parts are
missing or damaged, have such parts
replaced before attempting to use this
tool.
OPERATION
WARNING: ALWAYS wear eye protection,
adequate respiratory and hearing protection,
as well as suitable gloves, when working with
this tool.
WARNING: If it is used for any other purpose
not expressly permitted by these operating
instructions, there may be a risk of damage to
the hedge trimmer or serious injury to the user.
WARNING: DO NOT use the hedge trimmer in
the rain or store the hedge trimmer in wet
conditions.
WARNING: Do not let the blade come into
contact with fencing wire or any other object
that could damage it.
Switching on and off
Note: This hedge trimmer is tted with a two-
hand safety switch.
1. To switch the hedge trimmer on, press the
Safety Bar Switch (4) on the front grip (5)
with one hand and the on/off Switch (6)
with the other hand.
2. To stop the hedge trimmer, move the
hedge trimmer away from the cutting area
and release either one or both of the
switches.
Cutting
WARNING: If the blade stalls during cutting,
stop the hedge trimmer immediately and dis-
connect it from the power supply, before inves-
tigating the cause. Then remove any jammed
debris from the blades and examine the blades
for any damage before recommencing cutting.
1. Assume a secure position, using two
hands to hold the trimmer, and switch on
(see ‘Switching on and off’).
2. ALWAYS allow the blade to reach full
speed before commencing the cut.
3. Always move in a forward direction.
WARNING: DO NOT move backwards, as you
may fall over unseen obstacles. DO NOT cut
towards solid objects such as walls, trees or
vehicles.
4. Trim both sides of the hedge, starting at
the bottom.
5. Pass the blade lightly through the surface
of the hedge. Do not attempt to cut too
deep.
6. Trim the top of the hedge last.
Note: For older hedges that require cutting
back substantially, use pruning shears or a
suitable saw to cut the thicker branches, and
then nish the job with the hedge trimmer.
Shaping
• Trim a hedge so that it is wider at the
bottom than the top. This improves light
penetration and promotes healthy growth.
• Narrow the hedge approximately 100mm
for every metre in height.
Pruning
• For optimum trimming performance, guide
the blade teeth at an angle of approx. 15°
to the hedge.
• To achieve a hedge with a uniform height,
it is recommended that you stretch a piece
of string along the edge of the hedge for
guidance. Then simply cut away all twigs
projecting above the line.
… 7 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Batavia BT-CHT002 - 7062516 wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info