Bedienungsanleitung Batavia BT-CLT001 - 7062515 (Seite 6 von 11) (Deutsch, Englisch, Holländisch, Französisch)

758145

Zoom out

Zoom in

Vorherige Seite

1/11

Nächste Seite

English

10 11

English

OPERATION

WARNING: Always wear eye protection, ade-

quate respiratory and hearing protection, as

well as suitable gloves, when working with this

tool.

Switching on and off

1. Ensure the trimmer head is in the correct

mode.

2. Pick up the trimmer; hold the machine

with one hand on the Main Handle (3) and

the other on the Auxiliary Handle (1). The

handle is equipped with an integrated

Safety Lock-Off (2).

3. Switch on the machine by pressing the

Safety Lock-Off and then the On/Off Trig-

ger (4). The machine will run until the On/

Off Trigger is released.

Grass trimming

1. Always keep the machine at arm’s length

with the trimmer head pointed away from

your body.

2. Move the trimmer head across the area to

be trimmed using a smooth sweeping

motion.

3. When approaching an edge or wall, try to

avoid allowing the line to impact the wall or

any other hard vertical surface.

Lawn edging

WARNING: Be careful when lawn edging as

any excess line cut off will be removed on a

vertical axis and if the tool is tilted it is possible

it could be thrown towards the operator’s eyes.

1. Put the tool into lawn edging mode with

the Mode Selector (15).

2. Turn the tool over so the Edging Small

Roller (13) and Edging Large Roller (14)

are on the ground and position on the

edge of the lawn.

3. Carefully move the tool along, trimming

only the excess grass over the edge of the

earth below.

Feeding the trimmer line

• When the trimmer line becomes too short,

bump the spool housing quickly and gen-

tly against the ground while de machine is

running and the spool will release more

trimmer line.

MAINTENANCE AND CLEANING

WARNING: Always disconnect from the mains

power supply, before carrying out any mainte-

nance/ cleaning of the charger. Remove the

battery before carrying out any maintenance/

cleaning of the tool.

Maintenance

There are no inner parts of the tool which need

maintenance.

Cleaning

• Keep safety devices, ventilation openings

and the motor housing as free as possible

from dirt and dust. Rub the electric power

tool with a clean cloth or blow over it with

low pressure compressed air.

• We recommend that you clean your elec-

tric power tool immediately after each use.

• Clean the electric power tool regularly with

a damp cloth and somewhat soft soap. Do

not use any cleaning or solvent materials;

these can attack the device’s plastic com-

ponents. Make sure that no water can get

inside the electric power tool.

TECHNICAL DATA

No Load Speed. . . . . . . . . . .8000 min-1

Trimming Diameter . . . . . . . . . . 230 mm

Dimensions . . . . . . . . . 155 × 24 × 19 cm

Weight . . . . . . . . . . . . . . . . . 2.3 kg

Sound Pressure Level LpA . . . . 72.40 dB(A)

Uncertainty KpA . . . . . . . . . . . . . . 3 dB

Sound Power Level LWA . . . . . .87.37 dB(A)

Uncertainty KWA. . . . . . . . . . . . . . 3 dB

Hand Arm Vibration

Main handle . . . . . . . . . . . 6.531 m/s2

Auxiliary handle . . . . . . . . . 6.764 m/s2

Uncertainty K. . . . . . . . . . . . . .1.5m/s2

DISPOSAL

Do not dispose of electric power

tools with domestic refuse.

The electric power tool is shipped in

packaging to reduce transport damage. This

packaging is a raw material and as such can

either be reused or can be fed back into the

raw material cycle. The electric power tool and

its accessories are made from various materi-

als such as metals and plastics. Take defective

components to a special refuse collection

point. Ask about these at your specialist shop

or local council. The product and the user

manual may be subject to changes. Technical

data may be changed without prior notice.

Batteries

Think of the environment when disposing of

batteries. Contact your local authorities to nd

out where your nearest disposal area is.

Do not dispose of batteries with domestic

refuse.

Do not dispose of by burning, risk of explosion.

EC-DECLARATION OF CONFORMITY

We, the Batavia GmbH, Weth. Buitenhuis-

straat 2a, NL-7951 SM Staphorst, declare by

our own responsibility that the product Cord-

less grass trimmer, Model BT-CLT001,

Item-No 7062515 is according to the basic

requirements, which are dened in the Euro-

pean Directives Electromagnetic Compatibility

2014/30/EU (EMC), 2006/42/EC (Machinery),

2011/65/EU (RoHS), 2000/14/EU and their

amendments. For the evaluation of conformity,

the following harmonized standards were

consulted:

EN60335-1

EN62233

EN50636-2-91

EN55014-1

EN55014-2

Staphorst, 24 March 2017

Meino Seinen, QA Representative

Batavia GmbH, Weth. Buitenhuisstraat 2a,

7951 SM Staphorst, Netherlands

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Batavia BT-CLT001 - 7062515 Seite 6

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info